Why is there no sound from the turn signal?

What is the fastest speed data for the Golf in CarParking?

The fastest speed data for the Golf in CarParking is 200. The details are as follows: 1. Introduction: The CarParking Golf is the R-Line variant with pure German heritage. It not only inherits Volkswagen's advanced car-making philosophy and craftsmanship but also retains the original Golf's personalized and sporty style, blending German quality design with extraordinary innovative technology. Equipped with the R-Line original brand sports kit, it showcases a more athletic and fashionable brand personality, making it the exclusive ride for many urban trendsetters. 2. Configuration: As the first R-Line series product introduced by FAW-Volkswagen, the Golf R-Line features distinct exclusive design elements. The front fascia boasts opposing trapezoidal air intakes, forming a bold "X" shape that exudes sharp dynamism. The R-Line original sports kit includes front and rear bumpers, side skirts, a rear spoiler, and aerodynamic components, combining sportiness and fashion to deliver a highly dynamic presence. At the rear, the striking smoked LED taillights create a striking contrast with the chrome-plated dual exhaust pipes.

3

4

Share

What is damaged when the fault code u0101 appears?

Fault code u0101 is an error indicating a dirty throttle issue. Below is an introduction to throttle-related content: 1. Function: The throttle controls the air entering the engine. After the air enters the intake pipe, it mixes with gasoline to form a combustible mixture, which then burns to generate power. 2. Principle: The principle of the throttle is that the traditional engine throttle control mechanism operates via a cable (flexible steel wire) or rod, with one end connected to the accelerator pedal and the other end connected to the throttle linkage plate. The electronic throttle primarily uses a throttle position sensor to control the throttle opening angle based on the engine's required energy, thereby regulating the amount of air intake.

3

0

Share

To What Level Should Car Antifreeze Be Filled?

Generally, the antifreeze reservoir will have a MAX (maximum level) mark and a MIN (minimum level) mark. The car antifreeze should be filled to a level between MAX and MIN. For most family cars, replacing antifreeze requires approximately 4-6 liters, depending on the vehicle model. Methods to determine if antifreeze is low: Check the antifreeze warning light on the dashboard. If it lights up, it is likely due to low antifreeze, though it could also be caused by excessively high engine temperature. Inspect the antifreeze reservoir. If the fluid level is below the MIN mark, do not continue driving and add antifreeze promptly. Check the level markings on the antifreeze reservoir. The normal antifreeze level should be between the MAX and MIN marks. To determine if antifreeze is low, observe the markings—if the antifreeze is below the MIN line, it indicates a shortage.

13

0

Share

What type of oil is used for Honda 1.5T engine?

The original oil is the one used for Honda 1.5T, with the oil model being 5W-30. In terms of applicability, the original oil is more suitable for the engine. However, depending on different needs, oils can have other functions, such as noise reduction, fuel efficiency, and power performance. Therefore, you can also choose oils from brands like Mobil, Shell, and Castrol. The viscosity of the oil changes with temperature, so special attention should be paid to its performance under low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand low temperatures of -30°C. The smaller this number, the better the low-temperature fluidity, making cold starts smoother for the car. The latter number represents the kinematic viscosity of the oil at 100°C. The higher the value, the better it can maintain viscosity at high temperatures, which can also be understood as better lubrication performance under high temperatures. The method for changing the oil in a Honda 1.5T is as follows: Wait for the engine temperature to drop, and also allow the oil to flow back to the oil pan; use a wrench to loosen the oil drain plug, and use an oil pan to catch the old oil until no more oil flows out. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to flow out; use a special wrench to remove the oil filter; apply oil to the oil seal of the new oil filter and tighten it clockwise by hand; add the new oil through the oil filler cap on the engine valve cover, generally filling up to three-quarters of the oil can; start the engine and let it run for 5 minutes, then check for any oil leaks at the oil drain plug and oil filter, and repair if necessary; after stopping the engine, pull out the oil dipstick and check that the engine oil is within the standard range.

13

5

Share

How to Adjust the Time on a Beijing Hyundai Verna?

Beijing Hyundai Verna time adjustment method is: 1. Press and hold the CLOCK button until the numbers on the clock start flashing. 2. Rotate the knob to change the numbers, and press the knob to switch the position of the number being adjusted. 3. After adjusting the time, press the knob again to stop the clock numbers from flashing. Below is more information about the Beijing Hyundai Verna: 1. The Beijing Hyundai Verna is a model jointly designed and developed by Beijing Hyundai, Hyundai North America, and the European Design Center. Its exterior features smooth line designs with a fashionable style, targeting young consumers. 2. The Verna offers two engine configurations: 1.4L and 1.6L, both from Hyundai's latest γ engine series. The 1.4L engine delivers a maximum power of 78.7kW/6300rpm and a maximum torque of 135.4Nm/5000rpm, while the 1.6L engine provides a maximum power of 90.4kW/6300rpm and a maximum torque of 155Nm/4200rpm.

1

5

Share

How to Deal with the Abnormal Noise of Leopard Sunroof?

Abnormal noise in the Leopard sunroof indicates a severe lack of lubrication in the sliding rails. It is necessary to check whether the sliding rails are deformed and perform lubrication maintenance in a timely manner. Below are the precautions for car sunroof maintenance: 1. During the use of the sunroof, clean it regularly. After 2 to 3 months of use, the sunroof should be cleaned, mainly to remove dust and particles from the gaps of the sunroof. When cleaning, use a cloth to first remove the dust on the sealing strip, and after wiping it clean, apply a small amount of butter to the sliding rail tracks. 2. When the vehicle is parked and unused for a long time, clean it regularly. For example, use fine talcum powder to clean the sealing ring and other sunroof components, which can effectively extend the service life of the components.

9

2

Share

Why is there no sound from the turn signal?

What is the fastest speed data for the Golf in CarParking?

What is damaged when the fault code u0101 appears?

To What Level Should Car Antifreeze Be Filled?

What type of oil is used for Honda 1.5T engine?

How to Adjust the Time on a Beijing Hyundai Verna?

How to Deal with the Abnormal Noise of Leopard Sunroof?

Is the Problem Solved Just by Clearing the Fault Code?

What Causes a Sudden Increase in Car Fuel Consumption?

What Causes High Coolant Temperature in the Teana?

What year is a car manufactured in 2013 but registered in 2014 considered?