Why is there no signal in the car reversing camera?

1 Answers
DelEverly
07/29/25 12:52pm
The reason why the reversing camera displays no signal may be due to a faulty data cable connected to the reversing camera or damage to the reversing camera itself. Below is a detailed introduction about car reversing cameras: 1. Overview: The car reversing camera is part of the vehicle's system, displaying images of the area behind the vehicle in an intuitive and clear manner during reversing. It effectively helps avoid accidents and theft incidents. 2. Function: Through the display screen inside the car, obstacles behind the vehicle can be clearly observed. When the reverse gear is engaged, the system automatically activates the high-definition reversing camera located at the rear of the vehicle, displaying the rear situation clearly on the reversing LCD screen, allowing the driver to accurately grasp the road conditions behind.
Was this review help?
18
4
Share
More Forum Discussions

What are the causes of BYD S7 transmission failure?

BYD S7 transmission failure causes: There may be a fault in the power electronic control system, possibly due to a faulty connection line of a transmission sensor; lack of automatic transmission fluid; automatic transmission overheating or failure to increase speed due to one-way clutch slippage, etc. Functions of the transmission: 1. Change the transmission ratio: Meet the traction needs under different driving conditions, allowing the engine to operate as much as possible under favorable conditions and meet possible driving speed requirements. 2. Achieve reverse driving: Used to meet the needs of reverse driving. The engine crankshaft generally only rotates in one direction, but the car sometimes needs to reverse, so the reverse gear set in the transmission is often used to achieve reverse driving. 3. Interrupt power transmission: When the engine starts, idles, shifts gears, or needs to stop for power output, interrupt the power transmission to the drive wheels. 4. Achieve neutral gear: When the clutch is engaged, the transmission can output no power. For example, it ensures that the driver can release the clutch pedal and leave the driver's seat without the engine stalling.
14
1
Share

What is the lifespan of the Reiz 2.5 V6 engine?

The lifespan of the Reiz 2.5 V6 engine is generally closely related to regular maintenance, and it can typically function normally for more than 3 years. The engine is the heart of the entire vehicle, and its lifespan and performance significantly impact the value of the car it powers. Engine lifespan refers to the cumulative operating time or number of work cycles that the engine should achieve under specified usage conditions, serving as an important indicator of the engine's durability and quality. It is usually expressed in terms of operating hours or cycles, also known as working life. More details are as follows: 1. Advantages of the V6 engine: Many automotive journalists have described it numerous times—linear and smooth, these two words sum it up perfectly. Many people may not fully understand what smoothness entails. Simply put, it means the vehicle runs more smoothly during acceleration, with less vibration, resulting in a better driving experience. 2. Benefits of the front-engine, rear-wheel-drive layout: Another major selling point of the Reiz is its front-engine, rear-wheel-drive configuration. The advantages of rear-wheel drive are quite evident: the front wheels handle steering while the rear wheels manage power output, naturally leading to superior handling. Premium car brands like BMW, Mercedes-Benz, Jaguar, Maserati, and Bentley predominantly use this drive layout in their main models. This configuration is significantly more expensive to produce than front-engine, front-wheel-drive setups, contributing to the vehicle's overall premium feel.
9
4
Share

Should I replace the lock or duplicate the key if my car key is lost?

Both replacing the lock and duplicating the key are viable solutions when a car key is lost. 1. Duplicating the key: Depending on the car model, the service station will require the owner to provide the 17-digit anti-theft code for key configuration (this code is not the key cut number, usually provided to the owner at the time of new car purchase and should be kept safely). After obtaining the code, the service station will proceed in two ways: first, they will configure a metal key for the owner (this requires the owner to provide the key cut number; if the cut number is unavailable, the owner must present valid identification for both the vehicle and themselves to retrieve the cut number from the database). Second, they will modify the onboard computer parameters to invalidate the lost key (though the key can still unlock the door, it will no longer start the vehicle). 2. Replacing the car lock: This is a more secure option but comes at a higher cost. The price varies significantly depending on the car model, and the number of locks that need replacement also differs. Some models use a single key for the door, trunk, glove compartment, and fuel cap. In such cases, replacing all locks would require changing multiple locks.
5
0
Share

What are the reasons for the sluggish acceleration of Wuling Rongguang B12?

The reasons for the sluggish acceleration of Wuling Rongguang B12 include: 1. Carbon deposits: Carbon deposits include cylinder carbon deposits, throttle carbon deposits, spark plug carbon deposits, and intake carbon deposits. These areas are closely related to the engine's power output. When there is excessive carbon buildup inside the engine, the car's ignition energy decreases, intake efficiency drops, ultimately leading to reduced engine power, resulting in sluggish acceleration and a muffled sound. 2. Fuel system: Adding incompatible fuel grades can cause a decrease in the car's output power and reduced performance. Alternatively, if the fuel tank vent is blocked, or if the fuel tank switch, fuel filter, and the fuel line between the fuel tank and the carburetor are partially clogged, it may not meet the required fuel supply, leading to a lean mixture and sluggish engine acceleration. 3. Intake: If the air filter is not cleaned in time after prolonged use and becomes clogged, insufficient air volume will result in an overly rich combustible mixture, reducing engine power. For vehicles equipped with turbochargers, if the turbocharging device fails, even when the accelerator is pressed, the engine will remain sluggish and fail to deliver power. 4. Engine overheating: Engine overheating can lead to poor lubrication, increased mechanical wear, reduced engine power, and sluggish acceleration.
17
2
Share

How to Spray Windshield Washer Fluid in a Mercedes-Benz?

Method for spraying windshield washer fluid in a Mercedes-Benz: On the lever to the left of the steering wheel (the one that adjusts the wiper speed), press the head of the lever firmly inward and hold it down to spray the windshield washer fluid. Below is a tutorial for adding windshield washer fluid to a Mercedes-Benz: 1. Activate the wiper: Turn on the wiper spray switch, and the windshield washer fluid will spray from below the front windshield; 2. Drain the old windshield washer fluid: Completely drain the old windshield washer fluid, open the windshield washer fluid filler cap, and add a small amount of new windshield washer solution; 3. Activate the wiper again: Turn on the wiper switch once more to clear any remaining old windshield washer fluid; 4. Add windshield washer fluid: Once the spray nozzle stops spraying during the second activation, add approximately 4L of windshield washer fluid. After completion, securely close the windshield washer fluid cap, concluding the filling process.
12
3
Share

Why does the Mercedes-Benz brake pedal make a clicking sound when pressed?

There are several reasons why a Mercedes-Benz may produce a clicking sound when the brake is pressed: 1. Normal ABS activation: The ABS operation process is actually a cyclic process of locking-releasing-locking-releasing, keeping the vehicle in a state of near-lock rolling. When the ABS is activated by hard braking, a clicking sound may occur, which is a normal phenomenon. In this case, simply press the brake pedal firmly to the end. 2. Automatic transmission gear sound when braking: If you hear a "click" sound between the transmission and the gear lever when pressing the brake pedal, the main reason may be the electronic linkage between the brake system and the automatic transmission. Pressing the brake activates the transmission solenoid valve, producing the "click" sound. This serves as a safety reminder, and you need to press the gear lever lock button to shift gears. 3. Brake system malfunction: If the clicking sound occurs even with light braking, or if the vehicle lacks an automatic transmission lock button, or if the sound is continuous or intermittent, it is likely due to a brake system malfunction or a loose connection in the chassis. For safety reasons, the owner should promptly take the vehicle to a 4S shop for inspection and repair.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.