Why is there no network connection in the Internet of Vehicles?

2 Answers
FelicityLee
07/24/25 7:39am
It may be caused by a malfunction of the Internet of Vehicles antenna or interference from surrounding signals. Here is the relevant introduction: Internet of Vehicles: The Internet of Vehicles refers to a dynamic mobile communication system that enables interaction between vehicles, roads, people, and sensing devices, achieving communication between vehicles and public networks. Function: The Internet of Vehicles (IOV: Internet-of-Vehicle) can realize an integrated network for intelligent traffic management, intelligent dynamic information services, and vehicle control. It is a typical application of IoT technology in the transportation system field, an essential path for the mobile internet and IoT to develop towards substantive and in-depth business, and a fusion technology for future developments in information communication, environmental protection, energy conservation, and safety.
Was this review help?
17
0
Share
Gomes
08/11/25 3:22am
I often encounter situations where my car's internet connection is lost while driving for long periods, which is quite annoying. This is mostly due to poor signal coverage, especially in remote mountainous areas or underground parking lots where there are fewer operator base stations. It could also be a hardware issue, such as a damaged SIM card in the car's module or a loose built-in antenna causing unstable connections. Software settings also play a significant role—check if the APN configuration is correct or if the vehicle system requires the latest updates. As a precaution, a simple solution is to reboot the system by turning the car off and on again, which sometimes resolves the issue. If it happens frequently, it's best to visit a 4S shop to inspect the module and not delay, as it could affect navigation functionality. Nowadays, driving in the city without internet means missing real-time traffic updates, and relying solely on memory for navigation just doesn't work.
Was this review help?
19
0
Share
Expand All
More Forum Discussions

How to adjust the clock on Wuling Sunshine?

The method to adjust the clock on Wuling Sunshine is: 1. Turn on the radio and press the upper button of the circular button on the right; 2. Immediately press the upper button of the circular button again, and the hour display will blink; 3. Use the left and right directions of the circular button on the left to increase or decrease the value; 4. Press the upper button of the circular button on the right again, and the minute display will blink; 5. Use the left and right directions of the circular button on the left to increase or decrease the value; 6. After adjustment, press the upper button of the circular button on the right to confirm. Taking the 2020 Wuling Sunshine as an example, its body dimensions are: length 3797mm, width 1510mm, height 1820mm, wheelbase 2500mm, and fuel tank capacity 38l.
2
1
Share

What is the tire pressure for the City?

The recommended tire pressure for the City is 2.3 to 2.5 bar in summer and 2.4 to 2.7 bar in winter. Excessive tire pressure reduces the contact area between the tire and the ground, increasing the pressure and wear per unit area, which can easily lead to brake failure, tire blowouts when encountering road protrusions or depressions, and damage to the suspension system. Insufficient tire pressure increases the contact area between the tire and the ground, causing abnormal tire temperature during driving, which can lead to tire blowouts, increased fuel consumption, and reduced tire lifespan. The dimensions of the City are 4450mm in length, 1695mm in width, and 1477mm in height, with a wheelbase of 2600mm. This car is equipped with the new EarthDreams series engine, with a maximum power output of 73kw for the 1.3L model and 96kw for the 1.5L model.
11
3
Share

How Often Should a Car Be Polished and Waxed?

Cars frequently parked in garages only need waxing every six months. For vehicles parked outdoors exposed to wind and rain, it is recommended to wax every 2-3 months. As for car paint polishing, it should be done whenever minor scratches appear on the paint surface, with no fixed interval required. Below is relevant information about car maintenance: 1. Introduction: Car maintenance refers to the periodic inspection, cleaning, replenishment, lubrication, adjustment, or replacement of certain parts as preventive work, also known as car servicing. 2. Purpose: Modern car maintenance primarily includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. The goal of car maintenance is to keep the vehicle clean, ensure normal technical conditions, eliminate potential hazards, prevent faults, slow down deterioration, and extend the service life.
9
0
Share

Can You Continue Driving with Overheated Tires?

It is best not to continue driving and to check whether the brake caliper is returning properly. Tires are circular elastic rubber products mounted on various vehicles or machinery for rolling contact with the ground. They are often used under complex and demanding conditions, enduring various deformations, loads, forces, and high and low temperatures during operation. Therefore, they must possess high load-bearing capacity, traction performance, and cushioning performance, while also requiring high wear resistance, flex resistance, and low rolling resistance and heat generation. The following factors affect tire lifespan: 1. Tire load: The greater the vehicle's load, the shorter the tire's lifespan. 2. Tire temperature: During driving, tires heat up due to stretching, compression, and friction. Excessively high temperatures can accelerate tire wear and even lead to blowouts. 3. Road conditions: Prolonged driving on gravel roads or poor road conditions will reduce tire service life.
3
1
Share

How to turn off the start-stop function of Mazda CX5?

Method to turn off the start-stop function of Mazda CX5: You can directly press the auto start-stop button, and the dashboard will indicate that the system is turned off. Working principle of the start-stop function: When the vehicle stops moving due to congestion or at an intersection, and the driver presses the brake pedal to stop and shift into neutral, the system automatically detects that the engine is idling and not in gear, the wheel speed sensors of the anti-lock system show zero, and the electronic battery sensor indicates there is enough energy for the next start. The Mazda CX5 is positioned as a compact SUV, with dimensions of 4555mm in length, 1840mm in width, and 1710mm in height, and a wheelbase of 2700mm. The Mazda CX5's engine, transmission, body, and chassis all utilize the Skyactiv technology.
14
3
Share

How many kilowatt-hours of electricity are needed to fully charge the Roewe ei5?

The Roewe ei5 requires 35 kilowatt-hours of electricity to fully charge. The Roewe ei5 is a pure electric vehicle, equipped with an 85kW electric motor that delivers a maximum torque of 255 Nm. The Roewe ei5 uses a ternary lithium battery, which is commonly found in most pure electric vehicles due to its lighter weight and higher energy density. The front suspension of the Roewe ei5 features a MacPherson independent suspension, while the rear suspension uses a torsion beam non-independent suspension. The dimensions of the vehicle are 4544mm in length, 1818mm in width, and 1536mm in height, with a wheelbase of 2665mm. The Roewe ei5 is equipped with multiple intelligent safety features, including LDW Lane Departure Warning System, AEB Automatic Emergency Braking System, FCW Forward Collision Warning System, SAS Speed Assistance System, and automatic high/low beam headlight switching.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.