Why is there no fee deduction displayed after passing through the highway with ETC?

1 Answers
Gimli
07/30/25 10:48am
The reason why there is no fee deduction displayed after passing through the highway with ETC is: the deduction is not in real-time, and most of the time it is delayed for a few days before being processed. ETC works through dedicated short-range communication between the onboard electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane at the toll station. It uses computer networking technology to perform backend settlement processing with the bank, achieving the purpose of vehicles passing through highway or bridge toll stations without stopping to pay the fees. The reasons why ETC may not be detected include: 1. The electronic tag is not inserted correctly; 2. Unauthorized removal of the onboard electronic tag will render it unusable; 3. The vehicle's windshield has a metal explosion-proof film; 4. OBU transfer or replacement requires visiting a service center.
Was this review help?
12
2
Share
More Forum Discussions

Will points be deducted if the turn signal is used incorrectly and then corrected in Subject 3?

Points will be deducted if the turn signal is used incorrectly and then corrected in Subject 3. Here are the relevant details: 1. Subject 3 items: The road driving skill test for Subject 3 generally includes: preparation before getting on the vehicle, simulated lighting test, starting, driving straight, gear shifting operations, changing lanes, parking by the roadside, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and nighttime driving. 2. Turn signals: Turn signals are important indicator lights turned on when a motor vehicle changes direction to alert vehicles and pedestrians around. The turn signal bulb uses a xenon tube, controlled by a single-chip microcomputer circuit, working continuously with alternating left-right flashes. The turn signal uses a flasher to achieve the blinking effect.
12
2
Share

How to reset the tire pressure light on the 7th generation Golf?

The steps to reset the tire pressure light on the 7th generation Golf are: 1. Turn on the ignition, open the central display screen, press the "CAR" button, and click "Settings" in the lower right corner; 2. A selection menu will pop up, then select "Tire"; 3. The tire pressure monitoring system will appear, click "SET"; 4. Then select "OK", and a prompt will appear indicating that the tire pressure has been saved, confirming the successful reset. The 7th generation Golf is a compact car with dimensions of 4255mm in length, 1799mm in width, and 1452mm in height, with a wheelbase of 2637mm. It is equipped with EA211 series 1.6L and 1.4T engines. The 1.6L engine is paired with a 5-speed manual or 6-speed automatic transmission, while the 1.4T engine is paired with a 5-speed manual or 7-speed dual-clutch transmission.
2
2
Share

How to Remove Rust from Keys?

Methods for removing rust from keys include: 1. Vinegar Soaking Method: If there is not much rust on the key, you can soak the rust in vinegar to loosen it, then wipe it off with a cloth. Soaking time should be between half an hour to one hour, using enough vinegar to completely submerge the key; 2. Chemical Rust Removal: Soak the rusty key in a sodium hydroxide solution. The rust reacts with the solution to form iron hydroxide precipitate, while the iron does not react with sodium hydroxide, thus removing the rust; 3. Sandpaper Polishing: Fold the sandpaper and place the key between two layers of sandpaper, then rub it back and forth; 4. Wire Mesh Polishing: This method is suitable for keys with a lot of rust. Use a wire mesh (like those used for scrubbing pots) dipped in water to polish the key, intermittently rinsing off the rust with water. Once most of the rust is removed, soak the key in vinegar again, then dry it with a cloth.
18
3
Share

Does Gravity Oil Change Require Removing the Oil Pan?

Gravity oil change does not require removing the oil pan. Here is additional information: 1. Function of the oil pan: The oil pan is the lower half of the crankcase, also known as the lower crankcase. Its purpose is to seal the crankcase as the outer shell of the oil reservoir, preventing impurities from entering, and to collect and store the lubricating oil flowing back from the friction surfaces of the diesel engine, dissipating some heat and preventing oil oxidation. 2. Location of the oil pan: The oil pan is located at the lower part of the engine, is detachable, and seals the crankcase as the outer shell of the oil reservoir. Oil pans are mostly made of stamped thin steel sheets, while those with more complex shapes are generally cast from iron or aluminum alloy. Inside, there is an oil stabilizer baffle to prevent oil splashing caused by engine vibration, which helps in the sedimentation of lubricating oil impurities. The side is equipped with a dipstick to check the oil level. Additionally, the lowest part of the oil pan bottom is fitted with a drain plug.
14
4
Share

Can Car Heater Remove Fog?

Car heater can remove fog. After the water temperature returns to normal, turn on the heater, set the air circulation to external circulation to let outside air in, reduce the temperature difference inside and outside the glass, and eliminate the fog inside the window. Then switch to internal circulation to evaporate the fog. Turn the air conditioning temperature adjustment button to the heating direction, and the air direction button to the windshield vent. At this time, the hot air will blow directly onto the front windshield. This defogging method won't cause repeated fogging because the hot air dries all the moisture on the glass. However, when there is a large temperature difference inside and outside the window, fog may still form on the window glass. When the car has just started, the engine's water temperature is quite low. Turning on the heater at this time not only fails to defog but also adds burden to the engine and increases fuel consumption.
2
4
Share

What are the imported models of BMW?

BMW's fully imported models include: BMW 1 Series, BMW i3, BMW X5, BMW 4 Series Convertible, BMW X7, etc. Taking the 2021 BMW X5 as an example, the following is an introduction: Body dimensions are: Length 4930mm, width 2004mm, height 1776mm, wheelbase 2975mm, fuel tank capacity 82l, body structure is a 5-door 5-seat SUV. Power introduction: The 2021 BMW X5 is equipped with a 2.0T turbocharged engine, with a maximum power of 195kW and a maximum torque of 400Nm, paired with an 8-speed automatic transmission. It adopts a front suspension type of double-wishbone independent suspension and a rear suspension type of multi-link independent suspension.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.