Why is there no brake after changing the brake fluid on a motorcycle?

Can a Temporary ID Card Be Used for the Theory Test (Subject One)?

A temporary ID card can be used for the exam. The admission ticket and other required documents are handled by the driving school, which will distribute them during the exam. Electronic IDs are not accepted for the exam. If you do not have an ID card, you can apply for a temporary one, which holds the same legal validity as a regular ID card. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," the Subject One exam can be taken twice on the same day. If you fail the first attempt, you can retake it for free. If you fail the second attempt, the exam will be terminated, and you must wait ten days before rescheduling. The Subject One test consists of 100 questions, including multiple-choice and true/false questions, each worth 1 point, totaling 100 points. If you answer 11 questions incorrectly, the system will automatically submit the test and end the exam. The Subject One test is computer-based and lasts 45 minutes. Subject One Exam Content: Regulations on driver's licenses and motor vehicle management; road traffic conditions and rules; traffic safety violations and penalties; regulations on traffic accident handling; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject One Exam Notes: Candidates should dress appropriately—no slippers are allowed. Electronic devices and bags are prohibited in the exam room. Bring your ID card and queue to enter the waiting hall. Observe the instructions and procedures displayed on the screen, and store personal belongings in lockers before entering the exam room. Upon entering, verify your identity at the assigned station and begin the exam. Ensure the camera is aligned with you and follow exam rules. If you fail the first attempt, you can retake it the same day. If you fail again, you must pay to reschedule. After the exam, queue to collect your score report and sign it—unsigned reports are invalid. There is no limit to the number of times you can reschedule the Subject One exam. Each subject can be taken once, with one retake allowed if you fail. If you skip the retake or fail it, the exam ends, and you must reschedule. For Subject Two and Subject Three, only five attempts are allowed, and rescheduling must occur ten days later. If you fail the Subject Three safe driving knowledge test, your passing score for the road driving skills test remains valid. The driving test consists of three subjects: Subject One, Subject Two, and Subject Three. Subject One covers traffic safety laws, regulations, and related knowledge. Subject Two tests field driving skills. Subject Three includes two parts: road driving skills and safe driving knowledge. The safe driving knowledge test is taken after Subject Three, so it is commonly referred to as Subject Four, though this term is not officially recognized in the regulations (Ministry of Public Security Order No. 123).

20

1

Share

Where is the highest point of car wipers located?

The highest point of the wiper is at the far right of the windshield. The function of the wiper is to remove raindrops and dust attached to the vehicle's windshield, improving the driver's visibility and enhancing driving safety. The formal name for the wiper is 'Windshield Wiper,' which refers to the blade structure installed in front of the windshield, composed of a motor, reducer, four-bar linkage, wiper arm spindle, and wiper blade assembly. The role of the wiper node: It is often used to determine the position of the wheels, such as knowing where the left wheel will pass to avoid the tire pressing on solid lines or dodging potholes and stones on the road. When the line of sight aligns the protruding node of the left wiper with an object on the ground, the left wheel will pass over that object during movement. For example, if the wiper node aligns with the centerline on the ground, the tire will pass over the centerline. Types of wipers: There are roughly two types of wipers: one is the traditional intermittent type, which is the most common wiper with three to four segments, adjusted by the driver according to the rain intensity and visibility conditions; the other is the rain-sensing type, which has been increasingly used in mid-to-high-end models in recent years. A good wiper must have characteristics such as heat resistance, cold resistance, acid and alkali resistance, corrosion resistance, close fit to the windshield, reduced motor load, low noise, strong water repellency, and soft material to avoid scratching the windshield, ensuring clear vision. Wiper replacement cycle: When maintaining car wipers, you can lift the wiper and touch the cleaned rubber blade with your fingers to check for damage and the elasticity of the wiper blade. If the wiper is aged, hardened, or cracked, it needs to be replaced promptly. The better the quality of the wiper, the longer it can be used. Typically, wipers need to be replaced every six months to a year. Due to legal requirements, almost all cars everywhere are equipped with wipers. Rear windows of hatchbacks and SUVs also have wipers. Besides cars, other transportation vehicles like trains and trams are also equipped with wipers. Some engineering machinery, such as cranes, also have wipers. On the car's combination switch handle, there is a wiper control knob with three positions: low speed, high speed, and intermittent. The top of the handle is the washer button switch; pressing it sprays washer fluid to clean the windshield in conjunction with the wiper. The washer system is part of the wiper setup, consisting of a water tank, water pump, water pipe, and nozzles. The water tank is usually a 1.5 to 2-liter plastic container, and the pump is a micro electric centrifugal pump; it delivers the washer fluid from the tank to the nozzles, which then spray the fluid into fine jets onto the windshield, working with the wiper to clean the windshield.

10

3

Share

Has the Baojun 560 been discontinued?

Baojun 560 has been discontinued. The Baojun 560 is a compact SUV under SAIC-GM-Wuling. Taking the 2017 Baojun 560 as an example, its body dimensions are: length 4670mm, width 1810mm, height 1755mm, with a wheelbase of 2750mm. The 2017 Baojun 560 features a MacPherson strut front suspension and a trapezoidal link rear suspension. It is equipped with a 1.5T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 230Nm, paired with a 6-speed manual transmission.

8

5

Share

Is a 13-meter flatbed truck 3 meters wide?

13-meter flatbed truck is 3 meters wide. Here is the relevant information: Pre-trip inspection: Check the braking components, rear and brake lights on the flatbed, tires, leaf springs, towing devices, and safety nets. Loading and unloading: When loading or unloading a flatbed trailer, it must be parked on flat, hard ground. The driver should carefully inspect the ramps and ensure the blocking timbers are securely placed, and use wheel chocks to block the trailer tires. Transporting oversized objects: Special personnel must be assigned to monitor, drive slowly, and if there is any possibility of touching power lines, signal the trailer driver to stop immediately and take measures before proceeding.

18

1

Share

What does a car's automatic following system rely on from the vehicle ahead?

The automatic following system of a car primarily relies on detecting and calculating the distance to the vehicle ahead. Composition of the automatic following system: The automatic following technology is actually composed of a large number of sensors and control systems. Firstly, there is a radar sensor at the front of the car to monitor the distance to the vehicle ahead, a speed sensor to measure the speed of the opposing vehicle, and several radar sensors on both sides to monitor whether there are vehicles approaching from either side. Models equipped with this system: Currently, the main models on the market that are equipped with automatic following systems include the Volvo V40, BMW 5 Series Li, and Cadillac ATS-L.

5

1

Share

What is the general tire pressure for motorcycle tires?

Motorcycle tire pressure standards: Front wheel 1.75bar, rear wheel 2.25bar. Overview of tire pressure: Tire pressure, strictly speaking, refers to the air pressure inside the tire. Tire pressure is the blood pressure of a motorcycle, and the level of tire pressure plays a crucial role in the performance and power of the motorcycle. Function of tire pressure: Tire pressure is an indicator of a motorcycle's load capacity. The load capacity of a motorcycle depends on the level of tire pressure. According to the relationship between the tire's load index, tire pressure, and load capacity, the higher the tire pressure, the greater the load capacity; the lower the pressure, the smaller the load capacity.

5

Share

Why is there no brake after changing the brake fluid on a motorcycle?

Can a Temporary ID Card Be Used for the Theory Test (Subject One)?

Where is the highest point of car wipers located?

Has the Baojun 560 been discontinued?

Is a 13-meter flatbed truck 3 meters wide?

What does a car's automatic following system rely on from the vehicle ahead?

What is the general tire pressure for motorcycle tires?

What are the standard dimensions for a car parking space?

How to Determine if a Car is New?

What to Do When the Oil Pan Bolt Strips?

What is the relationship between the Mercedes-Benz S600 and the Maybach S600?