Why is there hot air when the car's air conditioning is off?

1 Answers
LaSteven
07/25/25 2:05am
The reasons why there is hot air when the car's air conditioning is off are: 1. The internal circulation mode is not activated. When the air conditioning is turned off, the system automatically switches to external circulation mode to ensure air flow inside the car. The outside air passing through the engine compartment becomes heated; 2. The temperature control is not set to the coldest state, leaving the air mix damper open. This allows heat from the engine coolant to enter the car through the damper. External circulation: Uses a fan to draw outside air into the car. In congested urban areas, the car may fill with exhaust fumes. Internal circulation: Blocks outside air from entering the car, preventing harmful external gases and helping to maintain interior temperature.
Was this review help?
3
3
Share
More Forum Discussions

Is the red terminal on a car battery positive or negative?

In a car battery, the red terminal is positive, and the black terminal is negative. The method for jump-starting a car battery is as follows: 1. Prepare two jumper cables; 2. Find a vehicle that can operate normally; 3. Position the two vehicles facing each other; 4. Connect the jumper cables to the batteries, positive to positive and negative to negative; 5. Start the functioning vehicle first, then start the vehicle being jump-started, and disconnect once started. Methods for maintaining a car battery: 1. Regularly inspect the battery; 2. Avoid overcharging; 3. Gently press the brake when starting; 4. Ensure the battery is fully charged if the vehicle is parked for an extended period; 5. Protect the battery from excessive heat and extreme cold.
10
4
Share

How to Tell if a Used Car's Odometer Has Been Rolled Back?

Here are specific methods to determine if a used car's odometer has been rolled back: 1. Check maintenance records: Visit the 4S shop to inquire about the vehicle's maintenance records. This is the simplest and most straightforward method. It is particularly suitable for relatively new cars, as such vehicles are typically serviced at 4S shops, allowing access to their maintenance records. 2. Observe interior wear and aging: Experienced mechanics can often spot discrepancies by examining the wear and aging of the interior, as wear levels are proportional to the vehicle's mileage. Key areas to inspect include: the dust cover under the gear lever, door panels and handles, dashboard buttons, center console, seat edges for wear and shine, which can help estimate the vehicle's mileage. 3. Check steering wheel and pedal wear: The wear on the steering wheel, accelerator pedal, brake pedal, and clutch pedal directly reflects the vehicle's usage frequency. These are the parts most frequently touched by the driver. While some drivers use steering wheel covers to reduce wear, subtle signs of wear can still be detected. 4. Tire wear and production date: Experienced drivers know that car tires typically last around 50,000 to 60,000 kilometers. If the tire treads are flat or the edges are worn smooth, it indicates the car has been driven extensively. When inspecting a used car, if the four tires show uneven wear, it may suggest the car was involved in an accident. If all tires have been replaced, the mileage likely exceeds 50,000 kilometers. 5. Inspect the OBD port: Another method is to check the OBD port, though this is less commonly used unless for maintenance checks, so it can serve as a supplementary reference.
1
3
Share

How to Open the Hood of a Buick Car?

Method to open the Buick hood: 1. There is a handle below the left hand side of the driver, pull it; 2. After the front hood is opened, reach inside and feel upwards, there is a mechanical lock, press the button down; 3. The hood release is located on the left side of the foot pedal, there is a hook, pull it, there is a hook at the front of the hood, press it upwards with your hand, sit in the driver's seat, there is a release lever next to the left knee, pull it to open the first safety latch; 4. Face the vehicle, there is a lever in the middle position, lift it upwards to open the second safety latch, after opening the steering wheel, there is a black thing at the lower left, then pull the front cover, and the engine hood will be opened.
11
1
Share

How to Turn Off the ECO Mode in Land Cruiser?

To turn off the ECO mode, there is a button next to the gear shift. On the left is ECT, and on the right is 2nd gear start. When you press the button towards the ECT direction, the ECO mode will be turned off. The ECO mode in cars serves the following three purposes: 1. The car's ECO is an energy-saving mode: When the ECO mode is activated, it comprehensively evaluates and analyzes factors that affect fuel consumption, such as automatic transmission gear, engine speed, vehicle speed, braking, and transmission oil temperature; 2. The ECU control unit calculates the optimal fuel amount and supplies it to the engine for operation: This effectively reduces fuel consumption compared to normal driving modes; 3. After activating the ECO mode, the throttle opening corresponding to the same accelerator pedal depth is smaller: The transmission shift logic prioritizes fuel economy, and it also adjusts the air conditioning output power.
12
3
Share

What to Do When the Tail Lights of a Sedan Stay On?

The methods to address continuously illuminated tail lights on a sedan are: 1. Check if the brake switch is short-circuited and replace it if necessary; 2. Visit a 4S store or a professional repair shop for expert assistance. Tail lights are installed at the rear of the vehicle, with the main color being red to enhance the penetration of the light source, ensuring that following vehicles can spot the car ahead under low visibility conditions, thereby preventing rear-end collisions. The replacement steps for sedan tail lights are: 1. Use a cross screwdriver or socket to remove the bolts; 2. Pull the light assembly out from the rear pillar; 3. Turn the socket counterclockwise and remove it; 4. Remove the old bulb and insert a new one.
11
5
Share

What does an exclamation mark with a wavy line underneath mean?

An exclamation mark with a wavy line underneath indicates an abnormal tire pressure condition in the vehicle. If this warning light remains illuminated after the vehicle's self-check, it means there is an issue with the tire pressure, and it is necessary to promptly check whether the tire pressure is normal to avoid dangerous situations such as tire blowouts. The effects of abnormal tire pressure include: 1. Increased friction coefficient with the road surface; 2. Steering becomes heavy and prone to deviation, creating unfavorable driving safety factors; 3. Increased movement of various parts of the tire, leading to excessive rolling and abnormal heat generation in the tire. The causes of abnormal tire pressure are: 1. Tire pressure is outside the normal range; 2. Tire leaks or punctures causing insufficient air pressure; 3. Excessive tire pressure. Tire pressure refers to the air pressure inside the tire.
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.