Why is there abnormal noise when accelerating the engine?

1 Answers
LeLeo
07/25/25 6:48am
When the car engine accelerates, the loud noise is caused by engine overheating or problems with the exhaust system. Engine issues: If there is a hissing sound from the engine, similar to steam or air escaping, and the engine rapidly loses power after hearing this sound, the possible problem is engine overheating. Check the cooling system. When pressing the accelerator, if acceleration is not obvious and there is a lack of power, accompanied by a hysterical sound from the engine, this is most likely to occur when the engine is hot, cold, or low on oil. Exhaust system problems: If there is a hissing sound from the engine, similar to steam or air escaping, and the engine rapidly loses power after hearing this sound, the issue may be a blocked exhaust system, vacuum tube leakage, or breakage. Loud noises coming from the exhaust pipe, sometimes also similar sounds from the front section, mainly indicate problems in the exhaust system. Check if the exhaust pipe is cracked.
Was this review help?
15
1
Share
More Forum Discussions

How to Determine if a Right-Angle Turn Will Clip the Corner

Here are the methods to judge whether a right-angle turn will not clip the corner: 1. Keep the right side of the vehicle close to the right boundary line while moving forward. When the center point of the left (right) triangular window of the front door aligns with the inner (outer) right-angle line, turn the steering wheel fully to the left (right). Once the vehicle body is parallel to both boundary lines (or about to be parallel), quickly straighten the steering wheel. 2. During a right-angle turn, stay close to the right boundary line. When the seatbelt inside the cabin (or the driver themselves) passes the inner corner, immediately turn the steering wheel fully to the left. Once the vehicle body is parallel to both boundary lines (or about to be parallel), quickly straighten the steering wheel. 3. When entering the right-angle turn test area, stay close to the right boundary line. As soon as the front boundary line aligns with the edge of the engine hood, immediately turn the steering wheel fully to the left.
2
1
Share

What brand of tire is wingood?

wingood is a brand under Wanda Boto. Wanda Boto specializes in the production of all-steel radial tires, engineering machinery radial tires, semi-steel radial tires, and light truck tires. In addition to wingood, there are also brands like PRIMUS, YOTO Yongtong, ECED PCR, TBR, and OTR tires. Factors affecting tire usage are as follows: 1. Correct installation of tires directly affects their lifespan, especially when replacing new tires. 2. Both underinflation and overinflation of tires can impact their lifespan. If tire pressure is too low, radial deformation increases, excessive deformation occurs on both sides of the tire wall, leading to shoulder wear on the tread, raising the tire temperature, and significantly reducing tire lifespan. If tire pressure is too high, tire rigidity increases, deformation and contact area decrease, increasing unit pressure on the tread center and accelerating wear. 3. The greater the vehicle load, the shorter the tire lifespan. Tires should be used within the maximum load capacity corresponding to the specified load index.
18
5
Share

What is the method for replacing the battery in a Magotan key?

Replacing the battery in a Magotan key involves the following steps: 1. Press the button on the side of the key's end cap and pull out the key blade; 2. Push the chrome-plated cap at the end of the key sideways until you hear a click, then pull the cap upwards to remove it; 3. Pry open the side slot to separate the key case; 4. Replace it with a 3V button battery identical to the original. Taking the 2020 Magotan as an example, it is a mid-size car with body dimensions of 4865mm in length, 1832mm in width, and 1471mm in height, a wheelbase of 2871mm, and a fuel tank capacity of 66 liters. The 2020 Magotan is equipped with a 1.4T turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, a maximum torque of 250Nm, and is paired with a 7-speed dual-clutch transmission.
6
2
Share

What is the time adjustment method for the Peugeot 308?

The time adjustment method for the Peugeot 308 is as follows: 1. There are three buttons on the left side of the display. Press the second button until the English word 'aff' appears; 2. Press the third button to adjust the date. After setting the date, press the second button to confirm; 3. Hold the adjustment lever for more than two seconds. After the time starts flashing, adjust the hour by quickly pressing and releasing the lever. Once the hour is set, wait until the minutes start flashing, then adjust the minutes using the same method. Taking the 2019 Peugeot 308 as an example, it belongs to the compact car category, with body dimensions of: length 4590mm, width 1820mm, height 1488mm, a wheelbase of 2675mm, and a curb weight of 1290kg.
20
2
Share

How to reset the maintenance light on a smart car?

To reset the maintenance light on a smart car, follow these steps: 1. Turn the ignition to ON, then quickly press the left button on the instrument panel three times. 2. When the instrument panel displays voltage or temperature, press the confirmation button on the left side of the steering wheel once. 3. The panel will then show "SERVICE." Press the "+-" button on the right side of the steering wheel to select "Reset all services." 4. Press the confirmation button, and the instrument panel will display that the reset was successful. Here is some additional information: 1. The smart car is a collaboration between Mercedes-Benz and the Swiss watch giant Swatch. 2. It comes in two models: a 2-door, 2-seater version and a 4-door, 4-seater version, both classified as microcars. As such, their engine displacement is relatively small, with two configurations available: a 0.9T turbocharged engine and a 1.0L naturally aspirated engine.
17
0
Share

Is Standing Guard Required Before Taking the Subject 4 Exam?

Subject 4 does not require standing guard before taking the exam. Standing guard is a regulation in certain regions and is not part of the official teaching syllabus. It is a local regulation. Whether to stand guard, when to stand guard, and how long to stand guard are all determined by local authorities, with no unified national regulations. Below is relevant information: Introduction to Subject 4: Subject 4, also known as the Subject 4 theory test or driver theory test, is part of the motor vehicle driver's license assessment. After the implementation of the "Ministry of Public Security Order No. 139 of the People's Republic of China," Subject 3 was divided into two parts: the road test and an additional safety and civilization knowledge test, commonly referred to as "Subject 4," which evaluates "driving ethics." Since this test is conducted after Subject 3, it is commonly called the Subject 4 exam. Officially, however, there is no such term as Subject 4. Subject 4 Exam Content: The exam mainly includes safe and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.