Why Is There Abnormal Noise from the Tires While Driving?

Where to handle 11 points deducted from a B2 driver's license?

B2 driver's license with 11 points deducted needs to undergo review at the traffic management department of the public security authority. Below are the specific details about the B2 driver's license: 1. Permitted vehicle types: The B2 license allows driving medium and heavy-duty trucks or specialized operation vehicles, as well as small cars, small automatic transmission cars, low-speed trucks, three-wheeled cars, and wheeled self-propelled machinery. The B2 license does not permit driving passenger buses or tow trucks. Driving a tow truck requires an A2 license, while driving a passenger bus requires a B1 license. If you want to drive both passenger buses and trucks, you need to apply for a B1 or A2 license. 2. Application method: The B2 driver's license can be applied for when initially obtaining a driver's license or by upgrading from a lower-level license. In either case, you need to submit an application to the local vehicle management office in your registered residence, then undergo a physical examination and study and take the test at a driving school as required.

13

1

Share

Where is AIWAYS New Energy Vehicles Produced?

AIWAYS has established its headquarters and technology center in Shanghai, where it also manufactures its vehicles. Additionally, the company has a wholly-owned subsidiary in Germany named AIWAYS GmbH. Below is an introduction to the characteristics of new energy vehicles: 1. Hybrid Electric Vehicles (HEVs): Equipped with batteries that can conveniently recover kinetic energy during downhill driving. In urban areas, the internal combustion engine can be turned off, allowing the vehicle to operate solely on battery power, achieving 'zero' emissions. 2. Battery Electric Vehicles (BEVs): Technologically simpler and more mature, they can be charged anywhere with an electricity supply. 3. Fuel Cell Electric Vehicles (FCEVs): Emit zero or near-zero emissions, reducing water pollution caused by oil leaks and lowering greenhouse gas emissions. They operate smoothly and quietly. 4. Hydrogen-powered Vehicles: Emit pure water and produce no pollutants while driving. 5. Supercapacitor Vehicles: Feature short charging times, high power density, large capacity, long service life, maintenance-free operation, and are economically and environmentally friendly.

16

3

Share

What Do the Various Markings on Car Tires Mean?

Car tire markings refer to the meanings of various symbols on the tires. These include the tire's specifications, ply rating, rim size, speed rating, etc. Proper use of tires not only affects the vehicle's driving performance but also has a significant impact on safety. Therefore, drivers must pay attention to tire maintenance while driving. Below is an introduction to tire markings: Tire Specifications: Usually represented by a set of numbers. The first number indicates the tire's section width, and the latter denotes the rim diameter in inches. For example, 165/70R14 means a tire width of 165 mm, an aspect ratio of 70, and a rim diameter of 14 inches. The middle letters or symbols have special meanings: "X" stands for high-pressure tires; "R" and "Z" indicate radial tires; "—" denotes bias-ply tires. For instance, "6.00—12" means a tire section width of 6 inches, "—" indicates a bias-ply tire, and 12 represents the rim diameter (i.e., the tire's inner diameter) of 16 inches. Ply Rating: The ply rating refers to the nominal number of cord layers in the tire's rubber, which may not exactly match the actual number of layers. It is an important indicator of tire strength. The ply rating is marked in Chinese, such as 12-ply, or in English, like "14PR" meaning 14-ply. Rim Size: Indicates the rim size compatible with the tire for practical use, e.g., "Standard Rim 5.00F". Speed Rating: Refers to the certified speed rating of the tire. Letters from A to Z represent speed ratings ranging from 4.8 km/h to 300 km/h. Common speed ratings include: Q: 160 km/h; R: 170 km/h; S: 180 km/h; T: 190 km/h; H: 210 km/h; V: 240 km/h; W: 270 km/h; Y: 300 km/h; Z: ZR speed above 240 km/h.

18

0

Share

Is a 125L Displacement Scooter Motorcycle Considered a Lightweight Vehicle?

A 125L displacement scooter motorcycle belongs to the category of lightweight motorcycles. A lightweight motorcycle refers to a motorcycle with an engine cylinder working volume not exceeding fifty milliliters, a maximum design speed not exceeding fifty kilometers per hour, and intended for single-person riding only. Lightweight motorcycles are a type of motorcycle and must meet all the technical standards and legal requirements stipulated for motor vehicles. Their maximum design speed, displacement, or total motor power are all lower than those of regular motorcycles. Their technical parameters and performance fall between electric bicycles and motorcycles, and they are motorcycles that can be driven by individuals under 70 years of age. Technical requirements for lightweight motorcycles: The handlebars, frame, and forks must be sturdy and reliable. The handlebars should rotate flexibly without any sticking, looseness, or deviation. The headlight, taillight, turn signals, rear license plate light, brake light, rearview mirror, license plate bracket, and speedometer must all be fully equipped. The volume and tone of the horn should be appropriate. Both front and rear wheels must be equipped with brakes. On dry, flat asphalt or concrete roads, when traveling at a speed of twenty kilometers per hour and using both front and rear brakes simultaneously, the wheel skid marks should not exceed a braking distance of four meters. Exhaust emissions and noise must not exceed the national standards.

13

2

Share

Is DOT4 Brake Fluid Universal?

Qualified brake fluids of the same quality grade can be mixed. If they are DOT4 brake fluids from reputable brands, they can be mixed. However, when switching from a lower-quality DOT3 brake fluid to a higher-quality DOT4 brake fluid, the original brake fluid must be completely drained. Brake fluids of different quality grades should not be mixed. Although the chemical properties, high-temperature, and low-temperature performance of brake fluids are compatible, there are slight differences in their formulations, which can cause minor chemical reactions when mixed. Therefore, mixing brake fluids can lead to unpredictable consequences, and it is strongly advised not to attempt it. Precautions for Replacing Brake Fluid: It is best to replace brake fluid at a 4S shop. There are two methods for replacing brake fluid: manual replacement and pressurized replacement using a brake fluid changer. Manual replacement is more common in small auto repair shops and typically requires two to three people to operate, with responsibilities divided into draining the old fluid, pressing the brake pedal, and adding new fluid. This method has two significant drawbacks: it is prone to air ingress, and the old fluid may not be completely drained. Determining When to Replace Brake Fluid: The first method is to follow the "maintenance manual" guidelines, which recommend replacement every 2 years or 40,000 kilometers, or when the fluid appears visibly cloudy. The second method involves using "professional testing equipment" to check the fluid. Replacement is necessary if the water content reaches 2.5% or the boiling point falls below 230°C.

6

2

Share

What to Do When the ETC Falls Off?

ETC needs to be reinstalled and reactivated after falling off. The installation process for the ETC device is as follows: Upon receiving the device, first check if the ETC card and the electronic tag (OBU) are damaged. Press the anti-tamper button on the back of the OBU, and the red light will briefly illuminate. The OLED screen will display "Label Invalid" or "Please Insert Card," indicating the device is functioning normally. Clean the front windshield, ensuring the surface is smooth, clean, and dry. Then, peel off the adhesive backing of the OBU and attach it to the installation position. Press firmly for 2-3 minutes to remove any air bubbles. Insert the ETC card with the front side facing the driver and the back side facing the windshield. The chip should be inserted into the OBU device. Method to activate the ETC device: Insert and remove the ETC card twice consecutively until the electronic tag screen displays "Bluetooth On." If the screen shows "Label Invalid" when inserting and removing twice without attaching the electronic tag, this is normal and does not affect activation. Alternatively, press the button on the top of the electronic tag to enable Bluetooth. Turn on the phone’s Bluetooth and open the corresponding mobile app (usually a download QR code is provided on the electronic tag). Navigate to the device activation interface. Click "Connect Device" and wait patiently for the "Connection Successful" prompt. After successful connection, upload a photo of the vehicle’s front to complete activation.

14

1

Share

Why Is There Abnormal Noise from the Tires While Driving?

Where to handle 11 points deducted from a B2 driver's license?

Where is AIWAYS New Energy Vehicles Produced?

What Do the Various Markings on Car Tires Mean?

Is a 125L Displacement Scooter Motorcycle Considered a Lightweight Vehicle?

Is DOT4 Brake Fluid Universal?

What to Do When the ETC Falls Off?

Is it difficult to make an appointment for C2?

Should You Engage the Handbrake First or Shift to P Gear First?

Which models does the W204 Mercedes-Benz refer to?

What Causes a Strong Gasoline Smell?