Why is there abnormal noise from the high-pressure fuel pump of the Volkswagen Golf?

2 Answers
DiMary
07/29/25 6:13am
The following are the reasons for abnormal noise from the high-pressure fuel pump of the Volkswagen Golf: Body noise: This problem is usually caused by insufficient body rigidity, which leads to deformation of the vehicle during driving, friction or shaking between the door and the door frame, or friction between steel plates due to welding failure in some areas. Applying adhesive tape on the doors and windows or padding rubber in the friction areas may reduce or eliminate the noise, but these are only temporary solutions. Some cars have significant wind noise, which is related to their design. If it is confirmed that no additional items have been added, the owner should not try to solve it themselves. In addition, poor fixation between body components of some cars may also cause abnormal noise, which can usually be resolved by tightening the screws. Transmission noise: If there is a "rustling" sound inside the transmission while driving, and the noise disappears when the clutch is pressed, it indicates that the noise comes from a transmission fault, possibly due to wear of transmission bearings or gears, or bearing spots.
Was this review help?
4
5
Share
DiJameson
08/12/25 9:41am
My Volkswagen Golf also had a high-pressure fuel pump noise before, a sharp sound like metal rubbing. I've been driving for almost ten years and found that such issues are commonly caused by internal wear or bearing damage in the fuel pump. For the Golf, the fuel pump is positioned towards the front, and if regular maintenance is neglected, dirty oil can clog the pump components, leading to noise. I've also experienced cases where the fuel pump drive chain was loose or the cam was worn, making a sound like a mouse gnawing—really annoying. If this noise isn't fixed promptly, not only could the fuel pump fail, but the engine might also stall, which is extremely dangerous on the highway. It's advisable to regularly check oil levels and quality and not wait until the problem worsens. Cleaning the fuel filter screen yourself can help temporarily. A mechanic once told me that if there's noise, it's best to go to a professional shop for a pump replacement, costing a few hundred yuan—much better than delaying repairs. Avoid those shady repair shops that promise cheap fixes.
Was this review help?
17
5
Share
Expand All
More Forum Discussions

What maintenance items are required for the Focus at 20,000 kilometers?

When the Focus reaches 20,000 kilometers, the required maintenance items include replacing components such as the engine oil filter, air filter, cabin air filter, and oil filter. Below is an introduction to vehicle maintenance: 1. Overview: Vehicle maintenance refers to the preventive work of regularly inspecting, cleaning, replenishing, lubricating, adjusting, or replacing certain parts of the vehicle, also known as vehicle servicing. 2. Maintenance Content: It mainly includes the maintenance of the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc.
10
1
Share

Will I be caught if I go straight in a left-turn lane?

Going straight in a left-turn lane is a traffic violation and will definitely be captured by cameras where they are installed. This situation constitutes not driving in the designated lane, which results in a 2-point deduction and a fine of 100 yuan. However, if the left-turn signal is red when you go straight in a left-turn lane, the penalty will certainly be compounded, as it violates both the traffic signal and the rule of not driving in the designated lane. Below are the correct actions to take when you find yourself in a straight lane but need to turn left: 1. When you need to turn left but are in a straight lane, you should abandon the left turn and continue straight. Do not force the turn. After going straight, you can replan your route or make a U-turn at the next intersection. 2. It is also important to note that not all left turns are on the left side of the road. For roads frequently used by long-wheelbase vehicles such as trailers, the left-turn lane may be in the second lane from the right. The purpose is to provide sufficient turning radius for long-wheelbase vehicles. When passing through these sections, follow the road signs to avoid making a wrong turn.
6
4
Share

What is Emergency Braking?

Emergency braking refers to the situation when a driver quickly and correctly applies the brakes during driving to stop the vehicle in the shortest possible distance in case of an emergency. Operation method: Quickly lift the accelerator pedal and immediately press the brake pedal firmly (maintain pressure), while simultaneously pressing the clutch pedal to bring the vehicle to a rapid stop. Below is relevant information about emergency braking: 1. The emergency braking system is installed at the front of the vehicle. It uses radar, cameras, and sensors to detect obstacles ahead. If an obstacle appears in front and the driver does not brake, the vehicle will automatically take emergency braking measures to reduce collision accidents. 2. Currently, the United States has enacted laws requiring all new vehicles to be equipped with emergency braking systems as a mandatory feature starting from September 2022.
16
5
Share

What Causes Smoke from a Motorcycle Engine?

Motorcycle engine smoke can be caused by the following reasons: Engine overheating after high-intensity or overload use: The engine temperature rises sharply, resulting in thick white smoke accompanied by a burnt smell. Radiator malfunction if the vehicle's radiator fails: The engine cannot dissipate heat effectively, leading to smoke emission. In this case, professional inspection and repair of the radiator are required. Oil leakage: High-temperature evaporation of leaked oil can also cause smoke with a burnt smell. A comprehensive inspection is necessary in such situations.
16
5
Share

How Long Can a Motorcycle Run After Adding Oil Once?

Motorcycle oil can last for 1,000-2,000 kilometers after being added. Below are the methods to handle insufficient oil and determine whether the oil needs to be replaced: Methods to handle insufficient oil in a car: After the low oil warning light comes on, the car can run for a maximum of 60 kilometers. Therefore, once the warning light is on, it is essential to replenish the oil at the nearest car repair shop or gas station to prevent further engine damage due to insufficient lubrication and ensure the safety of both the driver and the vehicle. Methods to determine whether the oil needs to be replaced: The simplest way to check the oil's shelf life is to observe whether the viscosity of the oil has changed, determine if the oil's smell has weakened, and check if the color of the oil has altered. When observing changes in oil color, pay attention to any changes in the additives within the oil. Additionally, you can use filter paper or electronic instruments to check whether the oil's shelf life has expired.
17
4
Share

Where is the vehicle air conditioning intake located?

Location of car air conditioning intake: For most vehicles, the intake is located beneath the rear of the front compartment wipers, while the outlet is positioned slightly to the right of the center of the dashboard. The air conditioning intake may vary depending on the brand and model of the car. Here are the steps to clean the car air conditioning intake: 1. First, locate the air conditioning intake, which is where the air filter is placed. 2. Purchase a specialized cleaning agent. 3. The air conditioning intake may differ across brands and models, but it is generally found at the intake beneath the wipers. If you can't locate it, turn on the air conditioning and place a tissue near the intake below the wipers—the air filter's location is where the tissue is drawn in. 4. Once the intake is found, remove the air filter. 5. After removing the filter, activate the air conditioning's external circulation (ensure the cooling function is not turned on). During cleaning, only adjust the fan speed and enable the external circulation. 6. Turn on the air conditioning and spray the cleaning agent (closing the windows and doors enhances effectiveness). 7. Shake the cleaning agent well, then insert the nozzle tube. Since the agent sprays as foam, the tube ensures precise and even application on the intake. After attaching the tube, remove the safety cap and spray the agent into the intake. 8. After spraying, keep the external circulation running for 10-15 minutes to allow thorough internal cleaning. After this period, turn off the air conditioning completely and shut down the vehicle.
2
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.