Why is there abnormal noise from a new motorcycle chain?

Where to Find Car Glass Dimensions?

To check the dimensions of the rear car glass, you can refer to the vehicle's user manual, which clearly labels the relevant information about the car. Alternatively, you can directly consult a salesperson at a 4S store for the answer. Typically, the area of the rear windshield is 1050mm*1050mm. More details are as follows: 1. General dimensions of the rear windshield: Generally, the thickness of the rear windshield glass is 4mm. The dimensions vary for each car model, and due to different vehicle designs, it's difficult to maintain consistent sizes. 2. Material: Most car side windows and rear windows use tempered glass. Compared to laminated glass, tempered glass increases strength through heating and pressurization, making it safer and providing anti-explosion functionality. However, the downside is that it is not suitable for repair or resetting; once damaged, the entire window needs to be replaced.

14

0

Share

Is the speed limit on Quannan Expressway 100 or 120?

Quannan Expressway has a speed limit of 100. Precautions for driving on expressways are as follows: Check for potential hazards before getting in the car; Concentrate on driving; Avoid fatigue driving; Maintain a safe speed; Request instructions early and report late; Be careful when driving at night; Handle tire blowouts correctly. Try not to occupy the outermost lane for long periods of time. Here is additional information: Relevant regulations: According to China's Road Traffic Safety Law, it is clearly stipulated that road traffic safety work should follow the principles of legal management and convenience for the public, ensuring orderly and safe road traffic; It is also important to note that motor vehicles that have reached the scrapping standard are not allowed to drive on the road. Article 21 of the Road Traffic Safety Law states that before driving a motor vehicle on the road, the driver should carefully inspect the safety technical performance of the motor vehicle.

3

4

Share

What does OBD mean?

OBD refers to the On-Board Diagnostics system. This system continuously monitors the engine's operating conditions to check whether the vehicle's emissions exceed the standard. If they do, it will immediately issue a warning. Below is relevant information about OBD: Introduction to On-Board Diagnostics System: The system continuously monitors the engine's operating conditions to check whether the vehicle's emissions exceed the standard. If they do, it will immediately issue a warning. When a system fault occurs, the Malfunction Indicator Lamp (MIL) or Check Engine warning light will illuminate. At the same time, the Powertrain Control Module (PCM) stores the fault information in memory. Through a specific procedure, the fault code can be read from the PCM. Based on the fault code, maintenance personnel can quickly and accurately determine the nature and location of the fault. Challenges Facing OBD: The implementation of OBD is closely related to four main aspects: usage environment, fuel characteristics, driving habits, and vehicle condition. Any deficiency in these areas can affect the expansion and application of OBD. The introduction of OBD technology requires corresponding improvements in the following supporting conditions: fuel quality, vehicle maintenance skills, consistency of related components, improvement in driver proficiency, advancement in OBD technology itself, and support from various sectors of society.

20

4

Share

Can a gasoline car be push-started?

Yes. The conditions required for "push-starting" a car: 1. The battery must have sufficient charge: When the ignition is in the "ON" position, it should ensure that the dashboard indicator lights are illuminated. 2. The car must be a manual transmission: Automatic transmission (AT) vehicles have a torque converter between the transmission and the engine, making it difficult to transfer torque in reverse at low speeds. Precautions: 1. Push-starting is a delicate technical task, so if the driver is not skilled and fails to coordinate the throttle and clutch properly, the vehicle may still not start after being pushed. 2. In addition to push-starting, you can also use another vehicle's battery to jump-start your car. Use two thick wires, connecting positive to positive and negative to negative, ensuring not to reverse the polarity. Once the car starts successfully, remove the wires immediately.

20

4

Share

Which OBD port connects to the positive and negative terminals?

OBD interface generally has the inner core wire connected to the positive terminal and the outer core wire connected to the negative terminal. OBD, or On-Board Diagnostics, is a system that monitors vehicle operating conditions and provides timely feedback on abnormalities, primarily focusing on the engine status and exhaust conditions of the vehicle. Below is an introduction to OBD: Functions of the 9 wires in the vehicle's OBD port: Among them, four wires are related to the vehicle's ECU: one is ECUCANH, one is ECUCANL, one is ECUK line, and another is the computer memory recovery line. Additionally, two wires in the vehicle's OBD are the ground and power lines provided by the vehicle itself. The other three wires are the vehicle's transmission communication line, instrument panel communication line, and body communication line, etc. Common functions of OBD: Continuously monitor the faults of components and systems to ensure that the vehicle's emissions do not exceed the requirements of OBD regulations during its service life; when detecting relevant emission faults, the OBD system can alert through the MIL light on the dashboard; faulty vehicles can be repaired promptly to reduce emissions; the OBD system helps technicians quickly diagnose and perform targeted repairs, lowering maintenance costs.

19

4

Share

Why Does the Car Shake When Driving?

Analysis of car shaking while driving: 1. Shaking during startup: Shaking during startup is caused by insufficient fuel combustion, leading to inadequate power. 2. Idle shaking: Idle shaking results from severe engine carbon deposits, ignition system issues, or unstable oil pressure. 3. High-speed shaking: High-speed shaking is due to excessively high or low tire pressure, abnormal tire wear, rim deformation, shock absorber failure, or tire dynamic imbalance. 4. Engine mount aging: The engine mount, which serves as the engine's shock absorption system, absorbs minor vibrations during operation. If the engine mount fails, these vibrations can transfer to the steering wheel and the cabin, causing the car to shake.

5

2

Share

Why is there abnormal noise from a new motorcycle chain?

Where to Find Car Glass Dimensions?

Is the speed limit on Quannan Expressway 100 or 120?

What does OBD mean?

Can a gasoline car be push-started?

Which OBD port connects to the positive and negative terminals?

Why Does the Car Shake When Driving?

What is the power rating of an electric vehicle charging station in kW?

What does PAB mean in cars?

Can a Car Be the Same as the Original After Replacing the Engine?

What Cars Are Suitable for People with Limited Budget?