Why Is There a Gasoline Smell When Starting a Cold Engine?

1 Answers
VanGeorge
07/29/25 4:41pm
Cold start gasoline smell may be caused by an oil leak somewhere or a faulty fuel injector. If the fuel injector is malfunctioning, gasoline cannot be fully atomized during a cold start, leading to incomplete combustion and resulting in a stronger gasoline smell in the exhaust. Additional Information: 1. If there is a leak in the car's fuel tank or fuel lines, consider whether the car has experienced a significant collision. Generally, owners can check for fuel tank leaks by observing whether there are oil drips on the ground where the car is parked or nearby. 2. Sometimes, during a cold engine start in winter, it may be harder to ignite due to the cold weather. This can cause some gasoline to be expelled through the exhaust pipe, resulting in a gasoline smell, which is a relatively normal phenomenon. Additionally, after the car is turned off, some unburned gasoline may remain. Since the car is in a closed state, the evaporated gasoline fumes can linger inside the car, also causing a gasoline smell.
Was this review help?
16
2
Share
More Forum Discussions

Can a Skoda be fitted with a Volkswagen steering wheel?

Can a Skoda be fitted with a Volkswagen steering wheel. Introduction to the steering wheel: A wheel-shaped device used to control the direction of vehicles such as cars, ships, and airplanes. Function of the steering wheel: The steering wheel is generally connected to the steering shaft via splines. Its function is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft. Using a larger diameter steering wheel reduces the hand force required by the driver when turning. The steering intermediate shaft, serving as a connector between the steering gear and the steering shaft, facilitates the standardization of the steering gear, compensates for errors during manufacturing and installation, and ensures a more rational installation of the steering gear and steering wheel in the vehicle.
14
0
Share

Will traffic police check if Jetta logo is changed to Volkswagen logo?

Traffic police will check, as privately changing the car logo is illegal. Here are the relevant details: Regulations: Changing the car logo is a violation of the law. According to the "Motor Vehicle Management Regulations," the car logo must match the model of the vehicle and is not allowed to be altered. If discovered, it will be dealt with in accordance with national regulations on motor vehicle safety technical conditions. If the logo change is discovered by traffic police, a fine will be imposed. Changing the color of the logo is not illegal: Changing the color of the logo is not a violation. If you only paint or wrap the logo to change its color, it is allowed because it does not affect the traffic police's ability to identify the brand and model of the vehicle. Additionally, changing the color of the logo does not require filing a report within ten days.
15
5
Share

Where is the blower resistor of Nissan Sylphy located?

Nissan Sylphy blower resistor is located behind the glove box on the passenger side, and operation requires access from the passenger side floor area. Below is relevant information about automotive blower resistors: Introduction: The blower resistor is a crucial control component. By regulating the automotive blower resistor, the operating state of the vehicle blower can be controlled, thereby achieving specific control effects and ensuring proper functioning. Function: The automotive blower plays a vital role in vehicles. It serves as the heart of the car's air conditioning system, enabling normal operation of the AC system. The blower resistor is an essential part of the automotive blower. During blower operation, it's necessary to consistently monitor the fan, paying attention to parameters such as current, oil temperature, oil pressure, intake vacuum level, sound, fan condition, temperature, and vibration.
1
5
Share

What is the zero-to-whole ratio of the 2021 Camry?

The zero-to-whole ratio of the Camry is 358.23%. Below is the relevant introduction: 1. Appearance: The eighth-generation Camry features dual styling designs for the luxury version and the sport version, both derived from Toyota's latest 'Keen-Look' design language. The luxury version adopts a large trapezoidal horizontal grille, with a streamlined body posture, lower waistline, and an extended rear roof that increases rear headroom. 2. Configuration: The eighth-generation Camry is equipped with Toyota's latest Toyota Safety Sense, including PCS (Pre-Collision System), LDA (Lane Departure Alert), AHB (Automatic High Beam), and DRCC (Dynamic Radar Cruise Control System), providing safer driving assistance.
18
5
Share

Where is the frame number embossed code for the Great Wall Pao?

The frame number of the Great Wall pickup truck is located under the hood, inside the engine compartment, on the nameplate next to the battery. Below is the relevant introduction: 1. Frame number: The frame number, also known as the Vehicle Identification Number (VIN), is a unique set of seventeen letters or numbers used on a vehicle to identify the manufacturer, engine, chassis number, and other performance data. 2. Numbering: This number is like a car's fingerprint. It not only helps in recording issues and changes of ownership but also aids in theft prevention. To avoid confusion with the numbers 1, 0, and 9, the English letters 'I', 'O', and 'Q' are not used, and the 10th digit representing the model year does not use 'I', 'O', 'Q', 'U', 'Z', or '0'.
15
1
Share

How to Park a Manual Transmission Car?

Parking a manual transmission car is relatively simple. The parking procedure is as follows: First, apply the brake: Press the brake pedal first. When the speed decreases to nearly a stop, then press the clutch pedal, followed by firmly pressing the brake pedal to bring the vehicle to a complete stop. Shift gears: After the vehicle comes to a complete stop, shift the gear into first. Handbrake and turn off the engine: Engage the handbrake, turn the key, and then turn off the engine. Clutch and foot brake: Release the clutch and foot brake, unfasten the seatbelt, and exit the vehicle. When driving a manual transmission car, it is dangerous to press the clutch pedal directly at high speeds. You must first press the brake pedal to reduce speed, and only when the speed has sufficiently decreased should you press the clutch pedal.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.