Why is there a crack inside the windshield but not outside?

1 Answers
OPhoebe
07/30/25 9:52am
If there is a crack inside the windshield but not outside, it may be caused by thermal expansion and contraction cracks or damage from external pressure. Additional information: Windshield wipers are one of the main sources of damage to the front windshield. On one hand, after prolonged use, aging wipers can cause damage - if the end of the wiper arm directly rubs against the windshield, it will not only fail to clean rainwater effectively but also scratch the glass. Moreover, wipers that accumulate dust can easily leave small scratches and fine marks on the windshield when rubbing against it. Experts point out that at high speeds, even these tiny scratches can lead to windshield breakage. Although the probability is small, some cases of sudden windshield shattering on highways without an apparent cause are actually the result of these accumulated minor scratches over time.
Was this review help?
5
5
Share
More Forum Discussions

How Long is the Warranty Period for Audi Engines?

Audi's warranty period is 3 years or 100,000 kilometers. During the warranty period, it is recommended to have maintenance done at an authorized 4S dealership, using the engine oil and oil filters provided by the 4S shop. According to the new regulations from the Ministry of Transport, as long as maintenance is performed at a qualified repair facility and recorded with a signature and stamp in the vehicle manual, it is acceptable. Regarding automotive after-sales services: Many car brands offer a vehicle warranty period of mostly 3 years or 50,000 kilometers, or 3 years or 60,000 kilometers. Among these, the engine and transmission, being the most important and expensive components of a car, have the same warranty period as the entire vehicle. For many commonly used automotive consumable parts, several first-tier brands also implement a no-warranty or limited-warranty policy. Scope of car maintenance: Modern car maintenance primarily includes the engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, and other maintenance areas.
3
5
Share

Will the Passat Lingyu emit white smoke from the exhaust if the throttle is broken?

If the throttle of the Passat Lingyu is broken, it will not emit white smoke from the exhaust. Situations and reasons for white smoke emission: Poor fuel vaporization, where unburned fuel is expelled from the exhaust pipe, forming milky white smoke; coolant entering the cylinder or gasoline forming water vapor, resulting in white smoke. Fault diagnosis and repair: When a car parked in winter or during the rainy season is started for the first time, white smoke from the exhaust is often visible. Once the engine temperature rises, the white smoke will disappear, and this condition does not require repair. If the exhaust pipe emits black smoke after the engine temperature rises, it indicates that the cylinder pressure is too low or individual cylinders are not working, and inspection and repair are necessary. If the exhaust pipe emits a large amount of water vapor and white smoke while the engine is running, check for water in the fuel tank, inspect whether the cylinder gasket is damaged, whether the cylinder block has cracks, and whether the cylinder liner sealing ring is in good condition.
7
2
Share

What Causes the Ticking Sound After Turning Off the Car?

There are several reasons for abnormal sounds after the car is turned off, such as brake system malfunctions. Below are detailed explanations: Disc Brake Malfunction: When driving at low speeds on a flat road, irregular intermittent noises may occur near the wheel axle. The noise slightly intensifies as speed increases but remains unchanged during uphill, downhill, or turning. On uneven roads, the noise becomes more pronounced, but pressing the brake pedal may reduce or eliminate the sound. During a stationary inspection, rotating the wheel back and forth can reveal the noise. This is often due to damage, deformation, or detachment of the brake pad support plate, damping spring plate, or guide plate in the disc brake system, causing increased gaps between components and resulting in collision sounds. Repairing deformed parts or replacing detached components at a service station is recommended. Front Suspension Ball Joint Malfunction: When driving at low gear on bumpy roads, continuous noises may emanate from the front axle, worsening with poorer road conditions or higher speeds. Shaking the front of the car vigorously while stationary can reproduce the noise. On smooth roads, irregular intermittent noises resembling metal cracking may occur. This is caused by excessive wear in the ball joint and socket gap. Since the ball joint socket is a sealed, non-serviceable component, replacement at a service station is necessary. Front Wheel Shock Absorber Malfunction: On flat roads, faint abnormal noises may be heard from the front of the car, intensifying during sharp turns. Pressing down on the front of the car while stationary and causing it to rebound can produce the noise, with louder sounds under greater pressure. The vehicle may also feel stiff and lack elasticity. This typically results from driving on rough roads with poor maintenance, leading to shock absorber oil leakage and damage. The severity of damage determines whether replacement is needed at a service station.
20
5
Share

What transmission is matched with the Cadillac XT5?

Cadillac XT5 uses a 9-speed automatic manual transmission (AT). The following is an introduction to automatic transmission (AT): AT Automatic Transmission: Hydraulic automatic transmission, this type of transmission consists of a torque converter, planetary gear mechanism, hydraulic control system, electronic control system, etc. AT Transmission Technology: Current AT transmission technology has matured sufficiently in all aspects. Under reasonable circumstances, its structure can fully meet the matching needs of different vehicle models, ranging from sports cars to ordinary family cars, and from longitudinal engine matching to transverse, covering various drivetrain configurations. AT Transmission Maintenance: In terms of later maintenance, compared to manual transmissions, its maintenance costs are higher. Regular maintenance mainly involves replacing the transmission oil and filter according to the manufacturer's recommendations. As the vehicle's mileage increases, the automatic transmission may develop some faults. Once fault repair is involved, the cost can range from thousands to tens of thousands of yuan.
15
4
Share

How many points will be deducted and how much will be fined for a 5-seater car overloaded with 2 people?

A 5-seater car overloaded with 2 people is considered to be overloaded by more than 20%, which will result in 3 points deducted and a fine. For non-operational small passenger cars carrying passengers exceeding the approved number by less than 20%, 2 points will be deducted and a fine will be imposed; for exceeding 20% or more, 3 points will be deducted and a fine will be imposed. The following are the hazards of overloading: Shortening the service life of the car and accelerating the aging of parts: Overloading will change the original design data. For example: loose rivets, tightened screws falling off, welding points breaking, and overall frame deformation. Overloading shortens the service life of the vehicle and accelerates the aging of rubber and plastic parts. Accelerating tire wear and changes: Car tires are designed and produced based on the total weight of the car, with a considerable safety factor. However, when the car is overweight, the tires will be overloaded and deformed. At the same time, increased friction will also lead to a shorter tire life. According to measurements, when overloaded by 20%, tire life is reduced by 30%; when overloaded by 40%, tire life is shortened by 50%. Accelerating engine damage: Overloading the car causes great damage to the engine. First, the load increases and the power is insufficient. Long-term low-speed driving leads to engine overheating and aggravates the damage of parts. At the same time, it also increases fuel consumption and transportation costs. Heavy steering and increased centrifugal force affect the car's handling performance: Overloading will increase the centrifugal force when turning, which will affect the stability of the car and reduce the possibility of accidents. Reducing braking performance and increasing the non-safety zone distance: There are many factors that affect the braking distance of a car, among which the change of the car's load will directly affect the length of the braking distance. When a loaded car brakes, the load tilts forward, the front wheel load increases, and the rear wheel is the opposite. This changes the ground adhesion and consequently the braking distance. The deceleration of a fully loaded car is less than that of an empty car. Shortening the life of the spring steel plate: reducing the vehicle's passing ability. Due to overloading, the spring steel plate is overloaded, and continuous rebound during operation shortens its life. Due to excessive load, the car body sinks as a whole, reducing the distance from the ground and the car's passing ability.
14
5
Share

Where to Adjust the Remote Key Lock Sound?

Remote key lock sound cannot be adjusted. If there is sound, it cannot be turned off; if there is no sound, it cannot be turned on. Here is some information about remote keys: 1. Almost all cars have remote keys, which can be used to unlock and lock the doors, making it very convenient. 2. Some cars will sound the horn once when the doors are locked, while others will not. 3. However, all cars will flash the hazard lights when the doors are locked or unlocked, which serves as a reminder to the owner that the doors have been unlocked or locked.
18
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.