Why is there a 10-day waiting period for the make-up test of Subject 3?

1 Answers
ArielLynn
07/30/25 7:14am
1. According to the driving test regulations: Article 37: Each subject can be taken once, and if the test is failed, a make-up test can be taken once. If the make-up test is not taken or is still failed, the current test session is terminated, and the applicant must reschedule the test. However, the make-up tests for Subject 2 and Subject 3 must be scheduled at least 10 days later. If the Subject 3 safety and civilized driving knowledge test is failed, the passed road driving skill test scores remain valid. 2. Test attempt limit: During the validity period of the driving skill test permit, the number of scheduled tests for Subject 2 and Subject 3 road driving skill tests must not exceed five. If the fifth scheduled test is still failed, the passed scores of other subjects will be invalidated.
Was this review help?
16
0
Share
More Forum Discussions

What are the reasons for a diesel direct injection engine failing to start?

Here is a detailed introduction to the reasons why a diesel direct injection engine may fail to start: 1. Battery depletion: A depleted battery can cause the car to fail to start. There are many reasons for battery depletion, such as lack of water in the battery, battery failure, or prolonged use of the air conditioning. 2. Ignition system failure: The car's ignition system is responsible for providing high-voltage electricity to the spark plugs at the right time to ensure the car runs normally. If the car fails to start and the battery is not the issue, then the ignition system may be faulty. Poor connections in the low-voltage circuit or leakage in the high-voltage wires can cause ignition system failure, affecting the car and making it difficult to start. 3. Extremely low temperatures: In cold winter weather, cars often fail to start. This is because, in low-temperature environments, the viscosity and speed of the car's engine oil decrease, leading to reduced ignition energy from the battery and decreased molecular activity. As a result, flammable gases cannot form, making it difficult to start the car.
2
1
Share

Can Electric Vehicles Drive Through Deep Water?

Whether an electric vehicle can drive through deep water depends on the specific water depth. If the water is too deep, it is still not recommended to drive through it. Although many electric vehicles currently have good waterproof functions, it does not mean they can frequently drive in deep water. Below are precautions for driving through water: 1. Drive in low gear: Use a low gear (for automatic transmission models, engage the climbing gear) and drive slowly and steadily through the waterlogged area while maintaining control of the direction. Be aware of any potholes or gaps in the road beneath the water. 2. Do not restart the engine after stalling: If the vehicle stalls in a waterlogged area, remember not to restart the engine. Engine stalling indicates that water has entered the cylinders. Restarting the engine can cause severe damage to the piston connecting rod components due to the incompressibility of water, and in severe cases, it may even lead to the complete scrapping of the engine.
10
3
Share

Which position on the Teana rear axle adjusts the camber angle?

The eccentric screw on one end of the upper suspension arm of the Teana rear axle is used to adjust the camber angle. The method for removing the rear axle is as follows: 1. Remove the clips on the rear wheel inner liner; 2. Remove the fixing screws at the bottom of the rear wheel inner liner, and use a jack to support one side of the shock absorber; 3. Remove the fixing screws on the shock absorber and take it off; 4. Remove the shock absorber on the other side using the same method; 5. Use a jack to support the middle position of the rear axle, then remove the fixing screws of the rear axle. Taking the 2021 Teana as an example, it belongs to the mid-size car category, with body dimensions of: length 4901mm, width 1850mm, height 1450mm, wheelbase 2825mm, fuel tank capacity 61.3l, and curb weight 1456kg.
1
1
Share

Will running a red light with a temporary license plate be captured?

It will be captured. According to the "Road Traffic Safety Law," drivers who violate traffic signals will be given a warning or fined between 20 and 200 yuan, along with a 6-point deduction. Temporary license plates are paper permits allowing vehicles to operate temporarily on roads. Traffic violation penalties are not related to whether the vehicle has a temporary or permanent license plate but are imposed based on the driver's illegal behavior. To determine a red-light violation, at least three pieces of photographic evidence are required: the vehicle has not left the stop line when the red light is on; the vehicle has passed the intersection when the red light is on; the vehicle has crossed the line and continued moving forward when the red light is on. Article 26 of the "Road Traffic Safety Law": Traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light indicates permission to pass, and a yellow light serves as a warning. Article 44: When motor vehicles pass through intersections, they must follow the instructions of traffic signals, traffic signs, traffic markings, or traffic police. Ways to avoid running a red light: When there are arrow signals, follow the arrow lights; otherwise, follow the circular lights; When the red light is on, the front of the vehicle must not cross the stop line; When the yellow light is on, the front of the vehicle must not cross the stop line; When the green light just flashes, if you are close and moving fast, you should proceed, as stopping might be difficult, causing you to cross the stop line; if you are far away, moving slowly, or the intersection is congested, you should stop; When driving in the city, develop the habit of looking for traffic lights whenever you see a crosswalk or stop line at an intersection.
20
0
Share

What Causes a Car to Fail to Start for No Reason?

There are several reasons why a car may fail to start for no apparent reason, including a dead battery, extremely low temperatures, and carbon buildup in the engine. When the car battery is dead, the vehicle won't start. There are many reasons for a dead battery, such as insufficient water in the battery, a faulty battery, or prolonged use of the air conditioning. If the car doesn't start, the first step is to check whether the battery is the issue and identify the specific problem before sending it to a 4S shop for repair. In cold winter weather, cars often have trouble starting. This is because low temperatures reduce the viscosity and rotation speed of the engine oil, leading to decreased ignition energy from the battery and reduced molecular activity. As a result, flammable gases cannot form, making it difficult to start the engine. If this happens, don't panic—it's not a malfunction but a normal phenomenon. Try pressing the clutch before starting the engine, as this may help. Carbon buildup in the car's engine can cause various issues, with the most common being difficulty starting the engine. There are many reasons for engine carbon buildup, such as excessive water in the gasoline, poor fuel quality, or poor sealing of the valve seat. If the car struggles to start, check if there's significant carbon buildup in the engine. If so, clean it promptly.
20
1
Share

What are the differences between Emgrand GS and Emgrand S?

Emgrand GS and Emgrand S differ in the following aspects: 1. Exterior Design: The Emgrand GS is positioned as an entry-level compact SUV with a youthful exterior design, while the Emgrand S has a more straightforward appearance. On the side profile, the Emgrand S features 18-inch blackened multi-spoke alloy wheels paired with red brake calipers, enhancing its sporty appeal. In terms of dimensions, the Emgrand S measures 4430/1833/1573mm in length, width, and height, with a wheelbase of 2700mm, showing slight variations compared to the Emgrand GS. At the rear, the Emgrand S has a relatively understated exhaust layout. The taillights adopt a slim design connected by a blackened decorative panel, creating the illusion of a full-width taillight, although the central section does not light up. 2. Interior Design: The Emgrand S is equipped with a 10.25-inch full LCD instrument cluster and a 10.25-inch floating central touchscreen, aligning with current mainstream designs. The gear lever of the Emgrand S also features a trendy yacht-style design, adding a touch of sophistication. The interior employs a black and red color scheme, extending from the steering wheel to the dashboard, door panels, and seats, exuding a strong sporty vibe. 3. Powertrain: In terms of powertrain, the Emgrand S will be powered by a 1.4T engine across all variants, similar to the Emgrand GS, delivering a maximum power of 141 horsepower and a peak torque of 235 N·m, paired with a CVT transmission that simulates 8 gears (the base model comes with a 6-speed manual transmission). The Emgrand GS also offers a 1.5T engine option, producing a maximum power of 177 horsepower. For the chassis, the Emgrand S continues to use a front MacPherson strut independent suspension and a rear torsion beam non-independent suspension.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.