···
Log in / Register

Why is the yellow light on the Geely Emgrand tachometer illuminated?

1 Answers
DeAsher
08/26/25 4:56am
Geely Emgrand tachometer yellow light illuminated indicates that there is a component failure in the car, and it is necessary to go to a related repair shop to troubleshoot the problem, then use a decoder to eliminate the fault code. The tachometer is commonly used in manufacturing industries such as motors, fans, papermaking, plastics, chemical fibers, washing machines, automobiles, airplanes, ships, etc., with the handheld centrifugal tachometer being the most commonly used. Geely Emgrand is a sub-brand built under the parent brand of Geely, newly equipped with a 1.3T DVVT turbocharged engine, with a maximum power of 98 kilowatts and a maximum torque of 185 Newton meters. The power per liter and torque per liter are higher than those of the same-level 1.5T engines, and the power performance is close to that of a 2.0-liter naturally aspirated engine.
Was this review help?
1
4
Share
More Forum Discussions

Can I Buy a Car in Another City?

It is possible to buy a car in another city, and after purchasing the car, you can either register the license plate in that city or return to your local area to register it. When buying a car in another city, be careful not to choose weekends for the purchase, as the vehicle management office cannot issue temporary license plates. After buying the car and obtaining a temporary plate, you must register for a local license plate within 15 to 30 days. Some cities or regions implement different emission standards. If you buy a car simply because it is cheaper but it does not meet the local emission standards, you will not be able to register it. After driving the purchased car back to your local area, you need to first go to the tax bureau to pay the vehicle purchase tax before you can register the license plate at the vehicle management office.
19
1
Share

Is it necessary to replace the entire assembly if the daytime running lights are damaged?

If the daytime running lights are damaged, it is recommended not to replace the entire assembly immediately. First, check if the bulb is burnt out or if the fuse is blown. You can also take it to a repair shop for a professional to inspect the wiring. Reasons for daytime running light damage: The causes of daytime running light damage include broken wires or poor plug contact, blown high or low beam fuses, damaged light relays, or burnt-out bulbs. It is advisable to have the specific cause checked at a 4S shop. Solutions for daytime running light damage: Try reprogramming the headlight control module, inspect the light guide ring driver and its connectors, replace the headlight control module, check the bulb, inspect the headlight driver, reprogram the headlight control module, inspect the light guide ring driver and its connectors, or replace the headlight control module. Solution for daytime running lights not lighting up when powered: Daytime running lights do not have a corresponding control button, but there is a light control option in the vehicle settings. Enter this page to see the "Daytime Running Lights" option, which will show whether it is turned off or on. If the daytime running lights are turned off in the settings, they will not light up when the car starts. To turn them on, press the "OK" button on the steering wheel in the daytime running light settings interface, which will set the daytime running lights to the on state. They will automatically light up when the car is restarted.
16
5
Share

Do You Need to Turn on AC for Hot Air?

Hot air does not require turning on the AC. The warm air is generated by the engine's heat and circulated into the car through the air conditioning system, thereby increasing the interior temperature. If you turn on the AC switch while using the warm air, the compressor will also operate, which not only fails to improve the heating effect but also increases fuel consumption. The AC button controls the air conditioning compressor's switch. During summer, when the driver turns on the cold air, the AC button must be pressed simultaneously for the air conditioner to cool and circulate cold air inside the car. Drivers can turn off the AC switch during startup or rapid acceleration, as the air conditioning compressor is driven by the engine and consumes some of its power. Turning off the AC switch can prevent insufficient engine power.
10
5
Share

What are the symptoms of a bad car fuel pump?

Symptoms of a bad car fuel pump: 1. Causes the fuel supply system to fail, making the vehicle unable to start; 2. Reduced fuel supply pressure, with no sound of the fuel pump operating; 3. Weak acceleration, accompanied by abnormal noises while driving; 4. Engine warning light turns on, with abnormal engine shaking; 5. Difficulty starting the engine, requiring prolonged turning of the key. Reasons for a bad car fuel pump: 1. Fuel level too low, preventing the fuel pump motor from getting sufficient cooling and lubrication, leading to overheating or failure; 2. Poor quality gasoline containing impurities or foreign objects; 3. Long-term failure to replace the fuel filter, resulting in clogging.
11
0
Share

What is the normal idling RPM when warming up a car?

Warm-up RPM should not exceed 3000 to 3500 RPM, and maintaining around 2000 RPM is generally normal. Both summer and winter require warming up the car, with winter requiring a longer warm-up period than summer. After sitting overnight, the lubricating oil on the engine's friction surfaces has mostly dissipated, leaving them without oil film protection. Low temperatures increase the viscosity of the lubricating oil, reducing its adhesion and flowability, which increases resistance when starting the engine. Proper idling warm-up can reduce this wear, thereby extending the engine's lifespan. At low temperatures, metals exhibit reduced elasticity and wear resistance. Only at normal operating temperatures can the engine achieve proper clearance and maintain optimal working conditions.
9
2
Share

What are the faults of low fuel pressure?

Faults of low fuel pressure include: 1. Poor sealing of the fuel pump outlet check valve; 2. Poor sealing of the fuel pressure regulator; 3. Poor sealing of the fuel injector. Low fuel pressure can cause difficulties in starting, unstable idle, weak rotation, low mixture ratio, and engine backfire. Insufficient gasoline pressure affects the normal operation of the engine. Due to insufficient gasoline pressure, the fuel sprayed by the injector cannot reach the predetermined value, thus affecting the combustion efficiency of the cylinder. After pressing the accelerator pedal, the engine speed does not increase rapidly, leading to unstable idle or weak acceleration.
10
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.