Why is the yellow light on in Toyota Corolla?

1 Answers
StAdriel
07/29/25 9:02pm
Toyota Corolla yellow light on reasons are as follows: Damaged sensors: Sensors include water temperature, crankshaft position, air flow, intake air temperature, oxygen sensors, etc. When these sensors are damaged, have poor contact, or signal interruption, the car's ECU cannot accurately obtain engine data, which will cause the engine fault light to come on. Poor engine maintenance: Poor engine maintenance is the most common cause of engine fault light illumination. Vehicles have a certain maintenance cycle. If the owner does not perform maintenance on schedule, coupled with poor driving habits, it will increase the burden on engine operation, and eventually the fault light will come on as a reminder. Poor oil quality: Oil quality includes fuel and engine oil. The fuel injected into the car generally has a grade. The manufacturer usually recommends which grade of fuel and which type of engine oil the owner should use. If the owner does not add as required, it will trigger an alarm over time.
Was this review help?
2
0
Share
More Forum Discussions

What is the width of a flatbed truck?

Different tonnage flatbed trucks have different widths, and flatbed trucks of the same tonnage but different lengths also vary in width. Same tonnage: Generally speaking, vehicles of the same tonnage may not have identical cargo compartment dimensions, but large trucks are typically 2.3-2.4 meters wide, with a minimum width of 2.3 meters. Length exceeding 8 meters: The length usually ranges from 8 meters to 10 meters or even 12.5 meters. For non-containerized vehicles, the top of the cargo is generally 4.2 meters above the ground, with a maximum height of 4.5 meters. Introduction to flatbed trucks: Flatbed trucks are a common type of road transport vehicle, favored by transport companies because they facilitate the loading and unloading of large, heavy cargo and can carry more goods compared to other vehicle types of the same specifications.
12
3
Share

What brand of engine does CFMoto use?

CFMoto uses self-developed engines, and high-end CFMoto motorcycles are equipped with Kawasaki engines. Introduction to CFMoto: Zhejiang CFMoto Power Co., Ltd., established in 1989, is a high-tech enterprise integrating R&D, manufacturing, and sales of motorcycles and power sports equipment, as well as a power entertainment equipment supplier. Zhejiang CFMoto Power Co., Ltd. was founded in 2003, with its predecessor being a motorcycle parts factory established in 1989. After more than 20 years of technological accumulation, it has gradually become a national high-tech enterprise specializing in the R&D, manufacturing, and sales of high-end power sports equipment. The company covers an area of 225 acres, with a construction area of 120,000 square meters, encompassing the entire process of frame, painting, machining, engine, and vehicle design and manufacturing, as well as a comprehensive logistics platform. Service life of CFMoto engines: With normal use and maintenance, the lifespan of domestic motorcycle engines is generally around 50,000 kilometers. For joint-brand motorcycle engines, major repairs are not needed within 100,000 kilometers.
19
2
Share

What Causes Slow Throttle Response When the AC is On?

Slow throttle response when the AC is on is due to insufficient engine power. It is necessary to clean engine carbon deposits, check the oxygen sensor, and regularly replace the three filters. Cleaning Engine Carbon Deposits: Excessive engine carbon buildup is a significant cause, primarily due to the use of unsuitable fuel. Adding a certain amount of cleaning agent when refueling and driving at high speeds after cleaning can help increase exhaust flow, allowing stronger airflow to remove larger carbon particles. Checking the Oxygen Sensor: As an internal control unit in the car, the oxygen sensor primarily monitors the air-fuel ratio in the engine. If it is damaged, it will cause an imbalance in the air-fuel ratio, leading to a sudden increase in fuel consumption. When the oxygen sensor is faulty, the exhaust pipe will emit darker-colored exhaust gases during driving, indicating that the oxygen sensor should be replaced. Regularly Replacing the Three Filters: During vehicle use, the oil filter, air filter, and fuel filter must be replaced regularly. If they are not changed for a long time, they can become dirty and clogged, affecting performance and sending incorrect signals to the engine control unit, resulting in incomplete fuel combustion and increased engine carbon deposits.
15
1
Share

What is the function of automotive windshield washer fluid?

The functions of automotive windshield washer fluid are: 1. Cleaning performance: It has the functions of wetting, penetrating, and solubilizing; 2. Anti-fog performance: It can significantly lower the freezing point of the liquid, providing antifreeze effects; 3. Anti-static performance: It forms a single-molecule protective layer on the glass surface; 4. Anti-static performance: It can eliminate the charge on the glass surface; 5. Lubricating performance: It has relatively high viscosity, providing lubrication; 6. Anti-corrosion performance: The windshield cleaner contains various buffering agents. Automotive windshield washer fluid is added to the independent washer fluid reservoir in the engine compartment. The method of adding it is: 1. Pull the hood switch to open the front hood; 2. Open the washer fluid reservoir cap; 3. While adding, observe the dipstick inside the reservoir and fill it up to the marked line.
11
5
Share

What Causes the Tire Pressure of a New Car to Drop to 1.9bar?

The tire pressure of a new car drops to 1.9bar because the vehicle has been parked for too long, causing the tire pressure to decrease. When the car leaves the factory, the tire pressure is usually closer to the upper limit of the safe range. However, as the car remains parked for an extended period, the tire pressure will naturally decrease. Some manufacturers intentionally lower the tire pressure to prevent excessively high speeds. Since the car is new, it requires an adaptation period. During this period, reducing the tire pressure slightly helps prevent traffic hazards caused by high speeds. Tire damage: If there is an issue with the tires at the time of delivery or if the tires are punctured during use, the low tire pressure alarm in a new car should prompt a thorough inspection to check for any tire damage. Hazards of low tire pressure: Increased fuel consumption: Low tire pressure increases the contact area between the tires and the ground, thereby increasing friction and driving resistance, which naturally leads to higher fuel consumption. Shortened tire lifespan: Similarly, due to the larger contact area with the ground, tire wear is accelerated, reducing the overall lifespan of the tires. Increased risk of blowouts: The rise in friction causes the tire temperature to increase, making the tires softer and weaker. When the tires can no longer support the vehicle's load, especially during high-speed driving, the risk of a blowout becomes significantly higher.
17
5
Share

Is it a problem to drive a new car at 140 km/h?

Driving a new car at 140 km/h can cause issues. A new car should be properly broken in before reaching 140 km/h. The vehicle's transmission system and lubrication system can suffer varying degrees of damage, affecting the car's lifespan. Definition of the break-in period: This refers to the initial operation phase of a new car, typically ranging from 1,000 to 1,500 kilometers. It is the essential mileage required for components to fully contact, friction, adapt, and stabilize. During the break-in period, a car exhibits characteristics such as rapid part wear, susceptibility to malfunctions, easy deterioration of lubricating oil, and high fuel consumption. It is important to observe load limits, speed limits, use high-quality lubricating oil, "warm up at low speeds," start slowly, accelerate gently, shift gears appropriately, brake gradually, strictly control coolant temperature, and frequently check the temperature of the transmission, drive axle, and wheel hubs. Purpose of the break-in period: The break-in period for a car is like an athlete warming up before a competition, helping to adjust and enhance the adaptability of all components to their operating environment.
3
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.