Why is the yellow light on in the Haval ss?

1 Answers
McTucker
07/29/25 9:40pm
Haval ss yellow light is the auto start-stop system indicator. The yellow light indicates that the auto start-stop system is temporarily unavailable. More detailed information about the Haval ss auto start-stop system is as follows: 1. When the auto start-stop system indicator turns yellow, the ss light will turn green after driving for a while, indicating that the auto start-stop system can function normally. Many cars, including Haval, are equipped with the auto start-stop system, which can reduce fuel consumption and lower exhaust emissions. 2. Haval is an independent brand specializing in manufacturing SUV models with high cost performance. Extended information: The Haval H6 uses two engines, one is a 1.5-liter turbocharged engine, and the other is a 2.0-liter turbocharged engine. The 1.5L turbocharged engine has 169 horsepower and a maximum torque of 285 Nm, equipped with CVVL technology and direct fuel injection. The 2.0L turbocharged engine has 224 horsepower and a maximum torque of 385 Nm, equipped with DVVT technology and direct fuel injection. Both engines use aluminum alloy cylinder heads and cast iron cylinder blocks.
Was this review help?
6
1
Share
More Forum Discussions

What are the precautions for picking up a car at a 4S store?

Here are the precautions for picking up a car at a 4S store: 1. Check the paint surface for defects: When the car leaves the factory, the paint surface should be smooth and flawless, as new cars undergo inspection before leaving the factory. However, during transportation from the manufacturer to the 4S store, the car may suffer scratches. Some dealers may repaint it and sell it as new. Therefore, when picking up the car, it is essential to check if the paint surface is smooth and flawless. Any defects could indicate a repainted transport-damaged car. 2. Check the production date: If a car remains unsold for several months after leaving the factory, it becomes inventory stock. Always check the production date when picking up the car. 3. Check the buttons inside the car: Cars come with many configurations, and most functions are controlled by buttons inside the car. When picking up the car, it is important to test all buttons to ensure they are functioning properly. The best method is to open and experience all operable buttons.
20
2
Share

How to Lock the Car When the Key Fob Battery Dies?

Remove the mechanical key from the remote key fob, detach the decorative cover behind the driver's side door handle, and insert the mechanical key into the keyhole; Lock the central locking system to ensure the vehicle's parking safety, and promptly replace the remote key fob battery.
1
3
Share

What is the method for making a U-turn on the highway?

The method for making a U-turn on the highway is: 1. Find the exit to get off the highway; 2. Choose the desired direction and re-enter the highway. Precautions for highway driving include: 1. The driver and front-seat passenger should fasten their seat belts, and the driver should not answer phone calls; 2. Avoid making sharp turns with the steering wheel while driving at high speeds; 3. Do not change lanes arbitrarily while driving. When changing lanes or overtaking the vehicle ahead, the turn signal must be activated in advance; 4. Only use adjacent lanes for overtaking, and immediately return to the driving lane after overtaking. Vehicles must not ride or drive on the lane dividing lines; 5. Do not reverse, drive in the opposite direction, make U-turns or turns by crossing the central divider, conduct test drives or drive training vehicles, or overtake or park on ramps; 6. Maintain a following distance of more than 100 meters. When the speed is below 100 km/h, the distance from the vehicle ahead in the same lane can be appropriately shortened, but the minimum distance should not be less than 50 meters.
18
2
Share

What to Do When the Engine Tachometer Stops Working?

The solutions for a non-functioning engine tachometer are: 1. Replace the flexible shaft connection inside the tachometer; 2. Reinstall the tachometer needle; 3. Clean any foreign objects inside the instrument panel; 4. Replace the wiring inside the tachometer. The purposes of the engine tachometer: 1. To determine if the car is truly started; 2. To help the driver determine the right time to shift gears; 3. Mechanics can judge the car's condition based on the tachometer display when the engine is idling. The components of the engine: 1. Engine block group: cylinder head, cylinder block, and crankcase; 2. Crankshaft connecting rod mechanism: piston, connecting rod, crankshaft, flywheel; 3. Valve train and intake/exhaust system: intake valve, exhaust valve, tappet, pushrod, rocker arm, camshaft, and camshaft timing gear; 4. Fuel supply system and governor: fuel tank, sediment cup, diesel filter, fuel pump, injection pump, and governor; 5. Starting device: clutch mechanism, flywheel ring gear, starter switch, battery.
14
1
Share

What Oil Should Be Added to a Car Transmission?

What oil should be added to a car transmission depends on the type of transmission: manual transmissions require gear oil, while automatic transmissions need transmission fluid. The functions of transmission oil are: 1. To change the transmission ratio and expand the range of torque and speed variations of the driving wheels; 2. To adapt to frequently changing driving conditions, allowing the engine to operate under favorable circumstances; 3. To enable the car to reverse while the engine's rotation direction remains unchanged; 4. To interrupt power transmission, facilitating gear shifts or power output in the transmission. The correct maintenance methods for an automatic transmission include: 1. Checking the automatic transmission fluid by testing its viscosity between fingers and replacing it if discolored or with a burnt smell; 2. Inspecting the manual gear selection mechanism, ensuring the linkage or cable connecting the gear lever to the manual valve is properly adjusted, with the manual handle position corresponding to the spring clip position inside the automatic transmission; 3. Adjusting the brake bands, where all adjustment structures need to be fine-tuned to compensate for wear; 4. Checking the braking performance of the parking gear, and inspecting and repairing if there is no braking performance in the parking gear.
1
5
Share

Is the Venucia Star a Joint Venture Car? How About Its Quality?

Venucia Star is not a joint venture car; it is a domestic vehicle. The front face of the Venucia Star features a 'V-Galaxy' design that breaks away from mediocrity, with a dot-matrix front grille seamlessly connected to the LED headlights on both sides. Additionally, the car measures 4691/1905/1706mm in length, width, and height, with a wheelbase of 2756mm, and comes equipped with 19-inch dual-tone alloy wheels, enhancing its overall design and quality appeal. Here are some details about the Venucia Star: 1. Interior: The Venucia Star adopts a 360-degree intelligent wraparound cockpit design, with a chrome trim strip running across the dashboard to create a rich sense of layering. 2. Features: The Venucia Star is equipped with a range of desirable features, including a three-spoke multifunction steering wheel, a 15.6-inch vertical touchscreen infotainment system, a 12.3-inch full LCD instrument cluster, and zero-gravity seats. In terms of intelligent driving assistance, the Venucia Star has also made breakthroughs, featuring systems such as intelligent driving assistance, 3DAVM panoramic monitoring, and a DVR intelligent driving recorder.
11
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.