Why is the windshield not wiping clean?

1 Answers
James
07/29/25 9:27pm
Windshield not wiping clean is due to the wiper blades aging or the glass surface being corroded. The wiper blades of a car are made of rubber, and when the wiper blades age, they cannot make tight contact with the glass. The windshield can reflect images in front of the car, allowing the driver to distinguish pedestrians on the road. If the windshield shatters while driving, it is necessary to reduce speed, move away from the driving lane, remain calm, and avoid suddenly turning the steering wheel or forcefully pressing the accelerator and brake. If the windshield only has minor cracks, ultraviolet light box plastic can be used to solidify and repair the glass. Only after the windshield is repaired can normal driving continue.
Was this review help?
9
0
Share
More Forum Discussions

Can You Still Drive with Coolant Warning Light On?

You cannot drive with the coolant warning light on. When the coolant warning light illuminates, you should immediately pull over to a safe location, turn off the engine as soon as possible, and wait for the engine to cool down before opening the hood to inspect. Regardless of the reason for the coolant warning light coming on, it indicates that the engine temperature is too high. If the engine is not properly cooled for an extended period, it can cause internal damage. Coolant is an essential part of a car's engine, circulating through the engine cooling system to carry away excess heat generated during operation, allowing the engine to run at normal operating temperature. When the coolant level is insufficient, it will cause the engine water temperature to rise too high, leading to damage to engine components.
1
5
Share

What brand of battery does Tesla use?

Tesla vehicles use a 55kWh battery. Below is a partial introduction about Tesla vehicle batteries: 1. Model 3 Platform: Tesla's large vehicles, the Model S and Model X, are similar, both built on a skateboard-style chassis made of steel and aluminum. This chassis architecture allows the 55kWh battery to be assembled under the floor like a sandwich. Although the curb weight is as high as 1,611 kilograms, the center of gravity is low. 2. Handling: This not only aids in handling but also helps protect the battery pack. Tesla's 55kWh battery pack can provide the Model 3 with a range of 409 kilometers. It is paired with a rear-mounted motor producing 175kW/375Nm.
8
2
Share

What kind of vehicle is used for the E license test?

E license is for male motorcycles. Cyclic gear shifting: It means stepping on the first gear, second, third, fourth, fifth, and neutral in sequence, which forms a cycle. Most domestic motorcycle brands adopt this shifting method, as it is simple and easy to operate. However, it has one drawback: if you shift carelessly at high speed, such as shifting from fifth gear to first gear, it can easily lead to an accident. International gear shifting: Many people call it the Southern gear. It was used on the two-stroke engines of Southern Yamaha in the 1990s and had a significant impact in China, gaining wide recognition from users. Perhaps you can still find its traces in some corners today.
12
4
Share

What are the hazards of driving at high gear and low speed?

There are many hazards, such as increased fuel consumption. Carbon buildup formation: Driving at high gear and low speed can easily lead to carbon buildup inside the engine. When the carbon buildup becomes severe, it can cause issues such as difficulty starting the vehicle, increased fuel consumption, reduced engine power, and sluggish acceleration. Additionally, this can severely wear out the engine and clutch. Clutch damage: High gear and low speed driving results in an abnormal gear ratio, often producing a "clicking" sound from the gears. Under these conditions, the clutch gears endure excessive impact and fail to transmit engine power effectively, making the clutch more prone to damage. Prolonged driving in this manner accelerates clutch wear and may also lead to difficulty in gear shifting.
6
4
Share

How often should the belt on the Atenza be replaced?

The belt on the Atenza should be replaced approximately every 60,000 to 80,000 kilometers. The car belt, also known as the automotive drive belt, primarily functions for power transmission. The Atenza is a mid-size sedan with body dimensions of 4870mm in length, 1840mm in width, and 1445mm in height, a wheelbase of 2830mm, and a fuel tank capacity of 56.2 liters. The Atenza is equipped with a 2.0L naturally aspirated engine, delivering a maximum power of 116kW at 6400rpm and a maximum torque at 4000rpm. It features a MacPherson strut front suspension and a multi-link independent rear suspension.
3
1
Share

Which wire should be cut to start a motorcycle?

Alternating ignition with dual wires. Jump-start method: To start a motorcycle without a key, connect the red and black wires together. Locate the ignition wires - one red (positive) and one black (negative). Touch the two wire ends together to start the motorcycle. Ignition system: Consists of components like the ignition coil, CDI unit, high-voltage coil, and spark plug. The primary current from the motorcycle's ignition coil enters the ignition unit, then flows through the high-voltage coil where it's amplified. This high-intensity current reaches the spark plug to ignite the fuel-air mixture in the cylinder. The resulting high-pressure combustion drives the crankshaft to perform work.
10
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.