Why is the Vizi airbag light always on?

3 Answers
LeEden
07/23/25 11:10pm
Vizi airbag light always on is a circuit problem or sensor failure. Circuit problem inspection: Commonly use a tester to detect faults, check if the circuit is unobstructed, whether the signal line voltage is normal, and measure if there are any signs of open circuit in the ground wire. Check if it can access its control unit, test one by one. If it is found that it basically cannot access, unplug the computer connector of the relevant component to see if it is caused by interference with its signal data line. Sensor failure: Strictly follow the vehicle model for professional inspection and maintenance, and operate under professional conditions.
Was this review help?
20
4
Share
LilyDella
08/10/25 7:07pm
Seeing the airbag warning light stay on is indeed quite annoying, as it usually indicates a system malfunction that should never be ignored. When the light is on, it means the airbag may fail to deploy in a critical moment, posing significant risks. Possible causes include loose or damaged sensors under the seats—especially the passenger seat, which is prone to dust accumulation or connector issues; problems with the control module (like a friend’s car where the computer failed); or poor wiring connections and blown fuses. I recommend visiting a professional repair shop immediately for a diagnostic scan—safety comes first. While driving, avoid frequently shaking the seats or placing heavy objects on them, and keeping them clean can help prevent malfunctions. Remember, the airbag system is a life-saving device—if the light is on, don’t delay, get it fixed right away.
Was this review help?
4
5
Share
Expand All
SanAiden
08/10/25 7:09pm
I've repaired many cars, and a common issue with the airbag light staying on is a loose sensor connector, especially the one under the passenger seat. You can check it yourself first: adjust the seat to the frontmost or rearmost position and ensure the connector is secure; then open the engine compartment fuse box and check if the airbag fuse is intact; if the problem persists, try disconnecting the battery for a few minutes to reset the system. But don't disassemble randomly, as it may cause electric shock. Most of the time, it's a minor issue, but if the light remains on, it could indicate an airbag module failure, requiring professional diagnostic equipment. During regular maintenance, pay attention to whether the system self-check light is normal—simple maintenance can save big money. Airbags are no small matter; a lit light indicates potential hazards, so address it early for peace of mind.
Was this review help?
5
4
Share
Expand All
More Forum Discussions

What are the questions for the driving license test subject one?

The driving license test subject one consists of 100 questions, according to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," divided into single-choice questions and true/false questions, with each question worth 1 point, totaling 100 points. If 11 questions are answered incorrectly during the test, the system will automatically submit the paper and end the test. Subject one, also known as the theoretical test or driver's theory test, is part of the motor vehicle driving license assessment. The test content includes driving theory basics, road safety laws and regulations, local regulations, and other related knowledge. The test is conducted on a computer, with a limited time of 45 minutes. Subject one test content: Driving license and motor vehicle management regulations; road traffic conditions and regulations; road traffic safety violations and penalties; road traffic accident handling regulations; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject one test precautions: During the subject one test, students should pay attention to their attire—no slippers are allowed, and electronic devices and bags are prohibited in the examination room. Bring your ID card and queue to enter the waiting hall. Observe the precautions and procedures on the large screen, and store personal belongings in a locker before entering the examination room. Upon entering the examination room, the identity verification station will assign a seat. After finding your seat, begin the test. Ensure the camera is aligned with you and follow the test discipline. If you fail the first time, there is a retake opportunity on the same day. If you fail again, you must pay to reschedule. After the test, queue to collect your score sheet and sign it—failure to sign will render it invalid. There is no limit to the number of times you can schedule the subject one test. Each subject can be taken once, and if you fail, you can retake it once. If you do not take the retest or fail the retest, the current test session will be terminated, and the applicant must reschedule the test. Subjects two and three, however, have only five test attempts each. Subjects two and three can be rescheduled after ten days. If you fail the subject three safe and civilized driving knowledge test, the previously passed road driving skills test scores remain valid. The driving test consists of three subjects: subject one, subject two, and subject three. Subject one refers to the road traffic safety laws, regulations, and related knowledge test; subject two refers to the field driving skills test; subject three is divided into two parts: road driving skills and safe and civilized driving knowledge test. The safe and civilized driving knowledge test is conducted after subject three, so it is commonly referred to as subject four. However, in official terms (i.e., the Ministry of Public Security Order No. 123), there is no such thing as subject four.
2
3
Share

How to Check the Engine Oil Level in a 2019 Mercedes-Benz E300L?

Here are the specific steps to check the engine oil level in a 2019 Mercedes-Benz E300L: 1. First, insert the key into the ignition. 2. Depress the brake pedal. 3. Press the one-touch start button to start the engine. 4. Run the engine until it reaches the normal operating temperature of 90 degrees. 5. Press the one-touch start button to turn off the engine. 6. Pull the hood release lever to open the front hood. 7. Remove the oil dipstick, wipe it clean, and reinsert it back into its original position. 8. Pull out the oil dipstick again to check the oil level. (The standard oil level is exactly in the middle between the upper and lower marks.)
18
2
Share

Can Vehicle Inspection Fees Be Invoiced?

Vehicle annual inspection fees can be issued as value-added tax (VAT) special invoices. According to the VAT reform regulations, enterprises can normally deduct input VAT when obtaining special invoices for annual inspection fees. Overdue Inspection: If a driver's license inspection is overdue within one year, the inspection or renewal can still proceed; if overdue between one to three years, passing the subject one exam is required before inspection or renewal; exceeding three years, the driver must retake all subject exams like a new applicant to re-obtain the license. Purpose of Annual Inspection: The annual inspection determines the vehicle's technical condition and operational capability, identifying fault locations and causes. Only after passing the inspection can it provide a basis for continued operation or maintenance.
5
1
Share

Whose technology is the Lynk & Co 03 engine?

Lynk & Co 03's engine utilizes Volvo's technology, but it does not directly use Volvo's engine. Here are more details about the Lynk & Co 03: 1. The Lynk & Co 03 is the first sedan product of the Lynk & Co brand and also the first sedan built on the CMA (Compact Modular Architecture) platform. It was officially launched on October 19, 2018, at the Fuji International Speedway in Japan. 2. The Lynk & Co 03 is equipped with two types of engines: one is a 1.5-liter turbocharged engine, and the other is a 2.0-liter turbocharged engine. The 1.5-liter turbocharged engine delivers 180 horsepower and a maximum torque of 265 Nm, while the 2.0-liter turbocharged engine produces 190 horsepower and a maximum torque of 300 Nm.
1
5
Share

How long does it take to determine the fuel consumption of a new car?

Generally, the break-in period is about 3,000 kilometers. After the break-in period, the fuel consumption will stabilize. How to calculate car fuel consumption: Fill up the car's gasoline tank completely and reset the odometer to zero. After driving for a period of time, refill the tank and note how many liters of gasoline are added. Then, divide the amount of gasoline added by the distance traveled to get the fuel consumption per kilometer. Reasons for high fuel consumption: The driver's skill level, improper gear shifting and excessive braking during driving can artificially increase engine power loss. Additionally, excessive braking will lead to more starts, as fuel consumption is very high during starting. Driving at low temperatures: cars require the engine to operate at normal temperatures. If the car is driven without preheating after starting, the engine will be in a low-temperature state, resulting in poor fuel atomization and incomplete combustion.
20
5
Share

What is the Triangle Exclamation Warning Light?

Triangle exclamation warning light is a common indicator on the car dashboard. The main reasons for this warning light to illuminate are: dry dual-clutch transmission clutch overheating, fuel cut-off system intervention or malfunction, parking sensor failure, external light malfunction, engine oil pressure sensor failure, or traction control system warning/failure. There are generally two scenarios when this light comes on: one indicates engine system failure, and the other indicates lighting system failure. The most common issue is lighting system failure, which typically includes position lights, fog lights, turn signals, or license plate lights. If this occurs, promptly check whether the car's lighting assembly is damaged, as it could also be caused by a single bulb failure. There are many factors that can trigger this warning light, requiring systematic troubleshooting.
8
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.