Why is the Vision X6 not recommended for purchase?

1 Answers
DelReid
07/30/25 2:43am
The Vision X6 features a sporty black interior, but it has eliminated several configurations including the metal door pedals, soft instrument panel, 3D LCD instrument cluster, and leather multifunction steering wheel. Additionally, the trunk lacks a cargo cover. The interior configurations have been significantly reduced. Additional information: 1. Rear seats: There is no center headrest or armrest, and the rear air vents are only available in higher trim models. 2. Non-adjustable steering wheel: The Vision X6's steering wheel only supports manual up and down adjustment, with no front-to-back adjustment. 3. Noticeable tire noise at high speeds: When the vehicle exceeds 60km/h, the tire noise becomes quite pronounced. 4. Shortcomings: The engine's overall parameters do not offer much advantage compared to newer engines from competitors.
Was this review help?
17
1
Share
More Forum Discussions

How long can you drive with 20% oil left?

With 20% oil life remaining, you can still drive at least 2,000 kilometers. The oil life indicator is an estimate, not an actual measurement. Functions of engine oil: 1. Lubrication and friction reduction: There is rapid relative sliding between pistons and cylinders, as well as between main shafts and bearing bushes. To prevent excessive wear of components, an oil film needs to be established between these sliding surfaces. A sufficiently thick oil film separates the surfaces of relatively sliding parts, thereby reducing wear. 2. Cooling: Engine oil carries heat back to the oil pan and dissipates it into the air, assisting the radiator in cooling the engine. 3. Cleaning: High-quality engine oil can circulate carbon deposits, sludge, and worn metal particles from engine components back to the oil pan. Through the flow of lubricating oil, it flushes away contaminants generated on the working surfaces of parts.
10
1
Share

Why is there no 93-octane gasoline now?

93-octane gasoline has been replaced by 92-octane gasoline. Here is the relevant information: 1. Regulations: Starting from 2013, some cities in China began implementing the fifth-stage national standard for vehicle gasoline, and it was fully implemented nationwide starting in 2017. The National IV 90#, 93#, and 97# gasoline grades were all adjusted to National V 89#, 92#, and 95#, with the addition of 98# gasoline. 2. Fuel composition: After the change to the new grades, the sulfur, olefin, and manganese content in the fuel were significantly reduced. This will effectively reduce vehicle exhaust emissions, prevent smog, and improve air quality. At the same time, it can also effectively improve the combustion performance of the fuel and extend the service life of the engine.
1
2
Share

What Are the Scrapping Standards for Flood-Damaged Vehicles?

When a vehicle cannot meet the national safety technical standards for in-use vehicles even after repair and adjustment, it must be scrapped. The following is relevant information about flood-damaged vehicles: 1. Introduction: A flood-damaged vehicle refers to one that has been submerged in water, typically involving the engine and transmission being soaked, with the water level exceeding the wheels and body seats, and the vehicle's underbody components being in prolonged contact with water. 2. Hazards of Flood-Damaged Vehicles: The dangers of water-damaged vehicles are significant. If a vehicle is submerged, it can easily lead to rusting of body components, shortening its service life and reducing safety performance. For example, water damage can cause corrosion and rusting of the vehicle's wiring, leading to sudden stalling or spontaneous combustion due to short circuits while driving, with potentially unimaginable consequences.
5
4
Share

What are the reasons for a Honda CR-V suddenly failing to start?

Here are the specific reasons why a Honda CR-V suddenly fails to start: 1. Carbon buildup in the engine: If there is slight shaking during idling, cleaning the throttle body and fuel injectors can resolve the issue. 2. Weak spark plug ignition energy: If spark plugs are not replaced after the maintenance cycle, their ignition energy decreases significantly, leading to misfires. 3. Insufficient fuel pressure in the low-pressure fuel system: Low fuel pressure in the low-pressure fuel system directly causes the engine to require a second ignition. Specifically, check the fuel pressure regulator, fuel pump, fuel filter, and internal fuel lines. 4. Battery depletion: Jump-starting the vehicle with another car or battery is necessary.
10
0
Share

What is the Chinese name for Insplre?

Insplre is a car model from Dongfeng Honda. The English word 'Insplre' corresponds to meanings such as 'inspire', 'encourage', and 'give inspiration' in Chinese. Currently, this Honda car model does not have a Chinese name. Insplre is highly popular among young people. 1. Exterior Design: The front face of the INSPIRE features a family-style design, with a single chrome trim strip running across the front and connecting with the headlights. The interior of the headlight assembly is smoked and equipped with multi-point LED light sources, giving it a highly technological feel. 2. Powertrain: The Dongfeng Honda INSPIRE is equipped with a 1.5T turbocharged engine, paired with a CVT continuously variable transmission, delivering a maximum output power of 194 horsepower. In terms of dimensions, the Dongfeng Honda INSPIRE measures 4910*1862*1450mm, with a wheelbase of 2830mm.
11
2
Share

What are the items for braking in Subject 3?

The items for braking in Subject 3 are as follows: 1. Going straight through an intersection: When you hear the instruction "Go straight ahead at the intersection," if there are traffic lights, drive according to the traffic light requirements. However, if there are no traffic lights, you must tap the brake in advance to slow down and shift to a lower gear when passing through the intersection, fully observe and confirm safety before proceeding. 2. Left/right turn at an intersection: Before turning left or right, you must slow down to 2nd gear in advance, and also apply the brake during the turn to prevent the speed from being too high. Excessive speed during a turn can easily cause the vehicle to overturn, which is very dangerous. 3. Passing through a crosswalk: When you see a crosswalk ahead, whether there are pedestrians or not, you must tap the brake in advance to reduce speed before passing. If there are pedestrians on the crosswalk, you must stop and yield when necessary, waiting for the pedestrians to pass before continuing to drive.
4
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.