Why is the used Buick Excelle XT so cheap?

1 Answers
LucasFitz
07/29/25 11:24pm
The low price of used Buick Excelle XT is due to its high fuel consumption. Here are the specific details about the Buick Excelle XT: 1. Vehicle positioning: The Excelle XT is a compact car under the Buick brand, with dimensions of 4609mm in length, 1798mm in width, and 1464mm in height, and a wheelbase of 2640mm. 2. Powertrain: The 1.3-liter turbocharged engine of the XT has a maximum power of 120kW and a maximum torque of 230Nm. This engine is equipped with a 48V mild hybrid system and multi-point fuel injection technology, featuring an aluminum cylinder head and block, paired with a 6-speed automatic transmission. The 1.5-liter turbocharged engine has a maximum power of 113 horsepower and a maximum torque of 141Nm. This engine is equipped with DVVT technology and multi-point fuel injection technology, featuring an aluminum cylinder head and cast iron block, paired with a 6-speed automatic transmission.
Was this review help?
10
1
Share
More Forum Discussions

Are Car Air Purifiers Effective?

Car air purifiers are effective. The functions of car air purifiers are as follows: 1. Remove microorganisms and pollutants from the air: Air purifiers can effectively kill and destroy bacteria, viruses, mold, and mildew in the air and on surfaces, while also removing sources of illness such as dead skin flakes and pollen from the air, reducing the spread of diseases through the air. 2. Quickly neutralize chemical gases: Air purifiers can effectively neutralize harmful gases emitted from volatile organic compounds, formaldehyde, benzene, pesticides, hydrocarbon aerosols, and paint, while also alleviating physical discomfort caused by inhaling these harmful gases. Car air purifiers are very useful for improving the air quality inside vehicles. With the gradual expansion of market demand, car air purifiers are rapidly developing in various aspects and playing an increasingly significant role in daily life.
18
5
Share

What is the speed of a tractor unit?

In the market, the maximum speed of tractor units depends on the specific model, with different models having varying speeds, typically around 100 kilometers per hour. Taking the Sinotruk Huanghe brand ZZ4184K3616D1 tractor unit as an example, this vehicle has a top speed of 95 km/h without a speed limiter, but only 79 km/h with a speed limiter installed. Most imported tractor units and some domestic high-end tractor units are already equipped with speed limiters. Once the speed exceeds the limiter's setting, the engine stops injecting fuel, meaning the top speed of a tractor unit isn't necessarily determined by its power alone. Tractor units can have multiple axles according to axle load regulations, with the most common configurations being 4×2, 6×2, and 6×4. However, some manufacturers offer 6×6, 8×4, 8×6, 8×8, 10×8, and 10×10 axle configurations. A 6×4 unit has three axles—typically an undriven front steering axle and two rear driven axles. The 6×4 configuration is more common for long-haul transportation in larger countries like the United States and Australia, while 4×2 and 6×2 units are more prevalent in Europe. Heavy-duty tractor units (such as those used for heavy transport and road trains) often feature four or more axles and drive more than two axles. In certain countries (e.g., Switzerland), a certain weight must be distributed across the driven axles, leading to the emergence of heavier variants with six-wheel drive. Otherwise, an additional tractor unit is required. Heavy-duty variants of tractor units can be converted into ballast tractors by installing temporary ballast, which requires special permits.
18
4
Share

How to Distinguish Between Intake and Exhaust Camshafts?

Distinguishing between intake and exhaust camshafts is done as follows: Open the camshaft cover, the valve with larger clearance is the exhaust valve, and the one with smaller clearance is the intake valve. The camshaft is a component in a piston engine. Its function is to control the opening and closing of the valves. Below are the methods for testing the camshaft position sensor: 1. Unplug the connector, turn the key to the second position, and use a voltmeter to measure and confirm that the power line has voltage output. 2. Use the meter to identify the ground wire. With the voltage setting, connect one probe to the confirmed power line and the other probe to the remaining two wires. The wire that shows voltage is the ground wire, and the remaining one is the signal wire. 3. Now turn off the key, extend the signal wire, plug back the connector, start the engine, and measure between the signal wire and the ground wire to check if there is signal voltage output. The output voltage should be less than the supply voltage. 4. While performing the above steps, inspect the signal teeth on the camshaft and check for any debris between the camshaft sensor and the signal teeth, ensuring the gap is normal.
20
2
Share

What Are the Hazards of Car Idling?

The hazards of car idling include: 1. Shortened lifespan: Reduces the service life of the engine. 2. Damaged catalytic converter: Easily damages the three-way catalytic converter. 3. Increased carbon deposits: Leads to more carbon buildup in the engine. 4. System damage: Harms the vehicle's electronic systems. 5. Fuel injector failure: Causes fuel injector malfunctions. Below is an introduction to related content: 1. Types of car idling: Normal idling, driving idling, and unstable idling. 2. Function of car idling: Car idling refers to the engine running without load, only overcoming the internal friction resistance of components, without outputting power externally, maintaining the minimum stable operating speed of the engine. The idling speed can be adjusted by changing the throttle opening size and the idling fuel supply.
14
0
Share

How Much Fuel Does Driving 100 km Consume?

Generally, the displacement of ordinary family cars ranges between 1.5L-2.0T, with a fuel consumption of 7L/100km-10L/100km. Below is some information about fuel consumption: 1. Introduction: It generally refers to the amount of gasoline consumed by a car over 100 kilometers, serving as a theoretical indicator for vehicles. 2. Methods to reduce fuel consumption: The longer the idling time while parked, the greater the fuel consumption, so try to minimize idling time; avoid rapid acceleration, slamming the gas pedal, and driving at lower RPMs. 3. Factors affecting fuel consumption: Various driving conditions such as acceleration, deceleration, braking, and engine idling, as well as load capacity, temperature, and whether the air conditioning is on, all have an impact.
15
2
Share

What does the on-the-road price of a car mean?

On-the-road price of a car = Ex-factory price + Vehicle purchase tax + Insurance premium [Commercial insurance + Compulsory traffic insurance] + Vehicle and vessel usage tax + Inspection and license plate fees. The specific details are as follows: 1. Vehicle purchase tax = Ex-factory price ÷ (1 + 17%) × 10%; 2. Insurance premium = Commercial insurance + Compulsory traffic insurance (The price of compulsory traffic insurance for family-use cars with fewer than 6 seats is 950 yuan, and for 6 seats or more, it is 1100 yuan); 3. Vehicle and vessel usage tax = (For models with 1.0L-1.6L displacement, the annual tax is 300 yuan; for 1.6L-2.0L displacement, the annual tax is 360 yuan; for 2.0L-2.5L displacement, the annual tax is 720 yuan); 4. Inspection and license plate fees are approximately 300-400 yuan, but if handled by a 4S shop, it may cost 600-1000 yuan.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.