Why is the truck not consuming urea?

How many liters of engine oil does the Mercedes-Benz E300 require?

Mercedes-Benz E300 requires 7 liters of engine oil. The new Mercedes-Benz E300 uses engine oil with the specification 5W40. If you want to change the engine oil during later maintenance, you can choose Shell, Castrol, Great Wall, Tongyi, or Tianshan engine oils. The viscosity of engine oil changes with temperature, so special attention must be paid to its performance under low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity. 5W means it can withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, and the smoother the cold start of the car will be. The latter number represents the kinematic viscosity of the oil at 100°C. The higher the number, the better it maintains viscosity at high temperatures, which can also be understood as better lubrication performance under high temperatures. The method for changing the engine oil in a Mercedes-Benz E300 is as follows: Wait for the engine temperature to drop, and also allow the oil to flow back into the oil pan; Use a wrench to loosen the oil drain plug and place an oil pan to catch the old oil until no more oil flows out. Start the engine and let it run for 30 seconds to allow the oil in the main oil passage to drain out; Use a special wrench to remove the oil filter; Apply engine oil to the oil seal of the new oil filter and tighten it clockwise by hand; Add new engine oil through the oil filler cap on the engine valve cover. Generally, pour about three-quarters of a standard oil bottle; Start the engine and let it run for 5 minutes. Check for any oil leaks around the oil drain plug and oil filter. If there are leaks, perform necessary repairs; After stopping the engine, pull out the oil dipstick and check that the engine oil level is within the standard range.

11

0

Share

Which Parts Are Cleaned in an Intake System Service?

Here are the methods for cleaning a vehicle's intake system: 1. Throttle Body Cleaning: Remove the engine cover, detach the throttle body, clean it with carburetor cleaner, then wipe dry with a cloth before reinstalling. 2. Engine Internal Carbon Deposit Removal: Open the oil filler cap, pour in a full can of engine cleaner (mixing with old oil), close the cap, then idle the engine for 10 minutes before shutting it off. This process dissolves sludge, gum deposits, moisture, and metal particles in the engine while reducing new oil contamination and extending engine lifespan. 3. Fuel System Carbon Cleaning: This includes cleaning injectors, combustion chambers, spark plugs, and throttle valves to address power loss, excessive fuel consumption, rough idling, poor acceleration, or starting difficulties caused by carbon buildup, gum deposits, and contaminants in the fuel system.

4

3

Share

How Often Should the Coolant Be Replaced in the Elantra?

Modern Elantra's coolant replacement cycle is every 60,000 kilometers, with a replacement capacity of 4L. Modern Elantra coolant replacement tutorial: 1. First, the vehicle must be parked for a period of time before the replacement operation can be performed to prevent burns from the coolant. Locate and loosen the coolant drain valve at the bottom of the radiator to allow the old coolant to completely drain out. 2. Put the vehicle in neutral and run it while continuously adding clean water to the coolant reservoir to flush out any residual coolant in the cooling system until the discharged water runs clear, indicating that the old coolant has been mostly removed. 3. When water stops flowing out, install the drain screw and turn off the vehicle's engine. Then, fill the reservoir with coolant to between the MIN and MAX marks. If slightly overfilled, it will not cause any adverse effects. 4. Start the engine again, and at idle speed, the air in the cooling system pipes will be expelled, causing the coolant level to drop slightly. 5. Once the level stabilizes, add more coolant to between the two marks, completing the coolant replacement process.

19

5

Share

What is the reason for the ABS warning light to return to normal after restarting?

When the ABS light comes on and then disappears after restarting, it may indicate an issue with the vehicle's braking control system or its sensors. In such cases, it is advisable to drive the vehicle to a 4S store or seek a professional repair shop for fault diagnosis as soon as possible. Additional Information: 1. ABS stands for Anti-lock Braking System, an acronym developed by Robert Bosch GmbH. It is a technology used in motorcycles and cars to prevent loss of control, generally reduce braking distance, and improve vehicle safety. 2. The anti-lock braking system enhances the safety factor of emergency braking while driving. Vehicles without ABS are prone to wheel lock-up when emergency braking is applied in critical situations, making the steering wheel immovable. This significantly increases the risk factor and can easily lead to severe consequences. Single-channel ABS typically controls both rear wheels based on the low-select principle.

3

4

Share

Should You Pull Out a Nail Stuck in a Tire?

It is recommended not to pull out the nail yourself. Instead, drive the car to a professional tire shop where trained staff can remove the nail and inspect the puncture. Here are some tips for car tire maintenance: 1. Check tire pressure: Both overinflation and underinflation are harmful. Adjust the pressure appropriately based on conditions. For example, reduce pressure slightly on wet or hot roads, avoiding overinflation. When temperatures drop suddenly, increase tire pressure to handle cold road surfaces. 2. Inspect tires for damage: Carefully check for issues like tire cracks, uneven wear, or rim cracks, and replace them if necessary. 3. Rotate tires regularly: Since front and rear tires bear different loads and wear unevenly, swapping them after certain mileage ensures optimal usage and extends tire lifespan. 4. Monitor tread depth: Replace tires when the tread is within 2-3mm of the wear indicator. Additionally, if a puncture occurs on the tire sidewall, never follow quick repair shops' advice to patch it—replace the tire immediately. The sidewall is too thin to withstand vehicle weight after repair, posing a serious risk of blowout.

13

2

Share

What are the maintenance items for a car with 100,000 kilometers?

The major maintenance items for a car with 100,000 kilometers are as follows: 1. Use engine oil of the appropriate grade and replace the oil and filter regularly (every 5,000 kilometers). Frequently maintain the air filter and replace it regularly (every 20,000 kilometers). Regularly clean the fuel system and replace the fuel filter (every 30,000 kilometers). Regularly maintain the radiator mesh (every 30,000 kilometers). Replace the spark plugs regularly (every 40,000 kilometers or based on driving conditions). 2. The most important maintenance tasks are changing the engine oil and oil filter. The most frequent maintenance task is car washing. The parts that need to be checked most often are the tire surface and pressure, oil level, coolant level, and brake fluid level. Major maintenance requires replacing all vehicle fluids, the engine accessory belt, spark plugs, cleaning the throttle and fuel injectors, cleaning the three-way catalytic converter and intake manifold, and replacing the fuel filter.

13

1

Share

Why is the truck not consuming urea?

How many liters of engine oil does the Mercedes-Benz E300 require?

Which Parts Are Cleaned in an Intake System Service?

How Often Should the Coolant Be Replaced in the Elantra?

What is the reason for the ABS warning light to return to normal after restarting?

Should You Pull Out a Nail Stuck in a Tire?

What are the maintenance items for a car with 100,000 kilometers?

How to Check the Manufacturing Date of a New Car?

What to Do If the ETC Device Falls Off?

What Causes Clutch Slippage?

What is the Difference Between a Regular Car Remote Key and a Smart Remote Key?