Why is the transmission warning light on?

1 Answers
OMalia
07/29/25 2:35pm
Transmission warning light may be on due to issues such as automatic transmission fluid, inability to increase speed caused by one-way clutch slippage, or failure to engage caused by jamming. Below is more related information: Automotive Transmission: Definition: An automotive transmission is a set of gear mechanisms used to coordinate the engine's speed with the actual driving speed of the wheels, aiming to achieve the engine's optimal performance. The transmission can produce different gear ratios between the engine and the wheels during vehicle operation. By shifting gears, the engine can operate within its optimal power performance range. The trend in transmission development is toward increasing complexity and higher levels of automation, with automatic transmissions becoming the mainstream in the future. Transmission Characteristics: The engine's output speed is very high, with maximum power and maximum torque occurring within a certain speed range. To leverage the engine's best performance, a transmission system is necessary to coordinate the engine's speed with the actual driving speed of the wheels.
Was this review help?
1
0
Share
More Forum Discussions

How to Use the Accord Hybrid's Paddle Shifters?

The correct way to use the Accord Hybrid's paddle shifters is: simply pull inward to adjust the strength of energy regeneration. The left paddle increases the energy regeneration intensity, while the right paddle decreases it. In Sport mode, the kinetic energy regeneration intensity level can be fixed and will not automatically change. Below is additional information about the Honda Accord: 1. The Honda Accord is a mid-size sedan developed by Honda Motor Co., Ltd. The original tires equipped on the Honda Accord are Michelin's ultra-high-performance Pilot Super Sport tires. 2. In terms of body dimensions, the Honda Accord measures 4930mm in length, 1845mm in width, and 1470mm in height, with a wheelbase of 2775mm.
5
4
Share

How to activate the Volkswagen Sagitar leaving home function?

To activate the Volkswagen Sagitar's leaving home function, turn the headlight switch to the AUTO position. This function automatically turns on the lights when the vehicle is unlocked. Relevant information is as follows: 1. The Volkswagen Sagitar has a body length of 4655mm, width of 1780mm, height of 1453mm, with a wheelbase of 2651mm, fuel tank capacity of 55L, trunk capacity of 510L, and curb weight of 1300kg. 2. The Volkswagen Sagitar features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 1.6L naturally aspirated engine producing a maximum horsepower of 110ps, maximum power of 81kw, maximum torque of 155nm, paired with a 5-speed manual transmission.
2
1
Share

Should a severely rear-ended car be repaired or scrapped?

Vehicles that are severely damaged or in poor technical condition and cannot be repaired, meeting the automobile scrapping standards, shall be subject to mandatory scrapping. When a vehicle is damaged, the following options can be considered: Insurance company compensates, and the owner repairs the car themselves. Insurance company designates a repair shop to fix the car. Insurance company compensates, and the vehicle is recycled and scrapped. Vehicle scrapping process: The car owner applying for scrapping and renewal must fill out the "Motor Vehicle Change, Transfer, Modification, Suspension, or Scrapping Approval Application Form" in duplicate and affix the owner's seal. The application is registered and reviewed, and a "Vehicle Scrapping Notice" is issued for vehicles that have reached the scrapping age limit. For vehicles that have not reached the scrapping age limit, after inspection and verification that they meet the automobile scrapping standards, a "Vehicle Scrapping Notice" is issued. The owner then submits the vehicle to a qualified recycling enterprise with the "Vehicle Scrapping Notice".
10
4
Share

What is the original battery model of Wuling Hongguang?

The battery model of Wuling Hongguang is 6-QW-45, with specifications of 12V45AH-450A. The rated voltage is 12V, the 20-hour rate rated capacity is 45AH, and according to SAE (abbreviation for Society of Automotive Engineers) standards, the cold cranking amperage is 450A. As a less noticeable component in a car, many car owners tend to overlook battery maintenance. Here are some tips on how to maintain the battery: 1. Do not use in-car electrical equipment for extended periods when the engine is off. 2. Avoid continuous vehicle starting. 3. Do not use external power devices when the engine is off. 4. Remember to turn off the lights after parking.
9
3
Share

What brand is the original audio system in Land Rover?

Land Rover's original audio system is from Meridian. Relevant information is as follows: 1. The Land Rover Range Rover is a mid-to-large size SUV under the Land Rover brand and is an imported model. The Range Rover has a curb weight of 2570kg, with body dimensions of 4999mm in length, 2073mm in width, and 1835mm in height, and a wheelbase of 2922mm. 2. The headlights of the Land Rover Range Rover Sport have been redesigned, with the LED daytime running lights featuring a more flattened design. The dashboard area incorporates a new touchscreen LCD display and is equipped with the Touch Pro Duo infotainment system. The lines of the front bumper have been completely redesigned, with a larger lower air intake grille opening, and the fog light housing positions on both sides are also wide and incorporate front radar sensors.
10
0
Share

Why is there a clicking sound when shifting gears in an automatic transmission?

Shifting gears without coming to a complete stop; Incorrect operation sequence when parking on a slope; Malfunction in the gear shifting mechanism; Wear and tear on transmission gears, etc. Incorrect operation when parking on a slope: In automatic transmission vehicles, the P (Park) gear relies on a locking hook to secure the gear and keep the vehicle stationary. When parking on a slope, you should first engage the handbrake and then shift to P gear. This allows the handbrake to bear the vehicle's sliding force. If you shift to P gear first and then engage the handbrake, the sliding force of the vehicle will be entirely borne by the P gear's locking hook, causing tension between the hook and the gear. In this case, shifting from P gear to other gears will produce a clicking sound. Malfunction in the gear shifting mechanism: Many automatic transmission vehicles with gear levers actually use mechanical structures to shift gears. Over time or due to corrosion, the connecting parts of the gear shifting mechanism can become loose or stuck, resulting in a clicking sound when shifting gears.
9
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.