···
Log in / Register

Why is the tire pressure monitoring light on in Lavida?

5 Answers
Kristin
07/29/25 4:16am

Reasons for the tire pressure monitoring light being on in Lavida: 1. Tire puncture. 2. Excessive tire pressure. 3. Driving with low tire pressure for too long. 4. Long-term lack of air leading to low tire pressure. Hazards of low or high tire pressure: 1. Low tire pressure: Increases tire body deformation, easily causes cracks on the tire side, generates flexing motion, leading to excessive heat, accelerating rubber aging, fatigue of the cord layer, and cord breakage. It also increases the tire's contact area, accelerating shoulder wear. 2. High tire pressure: Causes excessive stretching deformation of tire cords, reduces tire elasticity, and increases the load on the car during driving.

Was this review help?
16
1
Share
LeElizabeth
08/12/25 4:19pm

My Lavida has been running for over ten years, and I always stay alert when the tire pressure monitoring light comes on. It's usually due to substandard tire pressure, such as a drop in pressure when the weather suddenly turns cold, or slow leaks like a nail puncture. The sensors occasionally give false alarms, especially when the battery is low. I first check each tire with a manual pressure gauge to ensure the values are within the recommended range (as stated in the car manual). If everything is normal, I try resetting the system by driving a distance to let it self-check. Not addressing it promptly may increase the risk of a blowout and waste fuel unnecessarily. I recommend developing a habit of checking tire pressure monthly—it's not just a safety issue but also helps extend tire life. When in doubt, visiting a reputable repair shop is the safest option.

Was this review help?
15
1
Share
Expand All
LeFaith
10/03/25 2:28am

The tire pressure monitoring system in the Lavida lit up, which I find quite common, especially during seasonal transitions. Tire pressure fluctuates with temperature—expanding in heat and contracting in cold, either of which can trigger the warning. Sometimes, it's a false alarm caused by aging sensors or signal interference. I prefer using the simple pressure gauge from the onboard toolkit to check; it's convenient and cost-effective. If it's an actual pressure issue, I top up at the nearest gas station; for sensor malfunctions, professional diagnosis is needed. In daily driving, low tire pressure increases rolling resistance, affecting fuel efficiency, and accelerates tire wear. I believe regular maintenance can prevent such issues.

Was this review help?
10
0
Share
Expand All
OGavin
11/16/25 4:08am

The tire pressure warning light is on, and I always check it immediately to avoid safety hazards. The most common cause is low pressure in a single tire, which may be due to a puncture or a loose valve core. Sensor malfunctions can also trigger the light, such as a dead battery or poor wiring contact. I use an onboard or home tire pressure gauge to measure each tire's pressure, referring to the recommended values on the door sticker. If the pressure is normal, I reset the system; otherwise, I inflate or repair the tire. Remember, driving with the light on increases the risk of a blowout, especially at high speeds. Regular self-checks are a good habit, saving money and providing peace of mind.

Was this review help?
11
0
Share
Expand All
LucasDella
01/06/26 5:45am

The tire pressure light on my Lavida has come on a few times, usually due to minor issues. Uneven tire pressure is the most common cause, which can be triggered by rising pressure in hot weather or poor road conditions. I usually pull over and check with a simple pressure gauge—if it's low, I'll top it up; if everything seems fine, restarting the car sometimes turns the light off. Don’t ignore it, or you’ll face faster tire wear and higher fuel consumption. I’ve made it a habit to check the tire pressure every quarter—a basic 5-yuan gauge works just fine. If the light keeps coming on, it’s best to visit a repair shop to check if the sensor is faulty.

Was this review help?
9
3
Share
Expand All
More Forum Discussions

Why won't the Civic start despite having power, and why is the brake pedal hard to press?

Civic's brake pedal being hard to press and failure to start may be due to the driver pressing the brake several times after turning off the engine, causing the vacuum in the brake booster to disappear, making it difficult to press the brake pedal without assistance. Here are some precautions for using brakes: Avoid emergency braking at high speeds: While driving at low speeds, you can perform emergency braking when encountering sudden events ahead by stomping on the brake pedal. However, this should not be done at high speeds to prevent vehicle skidding or rollover. Gradual braking: During normal driving conditions, apply gradual braking by releasing the accelerator pedal while pressing the clutch pedal, shifting to a lower gear, and then pressing the brake pedal until the vehicle comes to a complete stop after the speed has decreased. Intermittent braking: On long downhill slopes in mountainous areas or during continuous braking that easily generates high temperatures, intermittent braking—alternately pressing and releasing the brake pedal—can effectively prevent the braking system from overheating.
1
2
Share

Is the Sehol A5 a Domestic or Joint Venture Car?

Sehol A5 is a joint venture car. Sehol is a new passenger car brand launched through the deepening joint venture cooperation between JAC Group and Volkswagen Group. The following are specific details about the Sehol A5: Body dimensions: The Sehol A5 has a length, width, and height of 4772mm, 1820mm, and 1492mm respectively, with a wheelbase of 2760mm. The body type is a 5-door, 5-seat hatchback. Powertrain: It features a 6-speed manual transmission, turbocharged intake, with a maximum horsepower of 150ps and a maximum torque of 210nm. Suspension: The car adopts a front-wheel-drive layout, with a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension. The steering assistance type is electric power steering, and the body structure is unibody.
11
3
Share

How to Turn Off the Vehicle Intrusion Alert?

To deactivate the vehicle intrusion alert, it is necessary to visit an authorized repair facility for prompt diagnostics, clearing relevant fault codes or performing repairs, and identifying the cause of the intrusion alert. Below is relevant information about vehicle intrusion: 1. Definition: This occurs when the vehicle's anti-theft system has been activated, and the vehicle was either impacted or had its doors opened. Sometimes it may be a false alarm; check the vehicle's contents, and if nothing is missing, it can be disregarded. 2. Causes of this situation: (1) Actual "unauthorized intrusion," where entry into the vehicle was gained through improper means, triggering the anti-theft system. (2) Improper operation by the owner, such as locking the vehicle with the remote control but opening the door manually from the inside using a mechanical key or by hand, leading to the normal triggering of the anti-theft system.
7
1
Share

What is the fuel tank capacity of the Spirior?

The fuel tank capacity of the Spirior hybrid model is 60 liters, while other models have a fuel tank capacity of 65 liters, as per official data. The Spirior 2.4L model requires 95-octane gasoline, while other models use 92-octane. The hybrid version has a fuel consumption of 4.2L per 100km, allowing a range of 1429km on a full tank. Other models consume 6.8-7.3L per 100km, providing a range of 870-956km on a full tank. During daily driving, it's essential to monitor the remaining fuel level. This is typically done via the fuel gauge inside the vehicle. Under normal circumstances, the gauge accurately reflects the fuel level. Most fuel gauges have 5 to 6 segments, and it's advisable to refuel when only 2 segments remain to avoid running out of fuel mid-journey. In actual refueling situations, the amount of fuel may exceed the marked capacity. This occurs because manufacturers specify the tank capacity from the bottom to the safe fill level, leaving space between this level and the tank opening. This space accommodates fuel expansion due to temperature increases, preventing overflow. Filling the tank to the opening may result in a fuel quantity exceeding the specified capacity.
14
5
Share

Why does the Civic's 47-liter tank only require 37 liters to fill up?

The reason why the Civic's 47-liter tank only requires 37 liters to fill up is that there is typically about 10 liters of engine oil remaining in the car when the system prompts for refueling. Therefore, only 37 liters need to be added to reach full capacity. Below is detailed information about automotive engine oil: Overview: Engine oil, also known as engine lubricant (English name: Engine-oil), has a density of approximately 0.91×10³ (kg/m³). It serves multiple functions including lubrication and wear reduction, auxiliary cooling, sealing and leakage prevention, rust and corrosion protection, as well as shock absorption. Composition: Engine oil consists of two main components - base oil and additives. Base oil forms the primary constituent of lubricants, determining their fundamental properties. Additives are used to compensate for and improve any deficiencies in the base oil's performance while imparting new characteristics, making them an essential component of lubricants.
1
4
Share

How long does it usually take to reissue a driver's license?

If you lose your driver's license and need to reissue it, it usually takes 1-3 working days to get a new one. The following is relevant information about driver's license reissuance: 1. Procedure: The motor vehicle driver or agent should bring the above materials to the vehicle management office to handle the replacement procedure for a lost motor vehicle driver's license. According to relevant laws and regulations, the validity period of a motor vehicle driver's license is 6 years, 10 years, or long-term. Within 90 days before the expiration of the driver's license, you should apply for a replacement at the vehicle management office where the driver's license was issued. If a motor vehicle driver fails to renew the license within one year after its expiration, the driver's license will be automatically revoked by the system. 2. Application materials: (1) "Motor Vehicle Driver's License Application Form". (2) The applicant's identity proof. (3) A written statement of the loss of the motor vehicle driver's license.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.