Why is the tire pressure monitor not displaying tire pressure?

2 Answers
VanJameson
07/29/25 11:15pm
There are mainly two reasons why a tire pressure monitor does not display the tire pressure, which are: 1. Insufficient battery power in the tire pressure sensor. Simply recharge the battery. 2. Failure to read the signal from the tire's internal monitor. Continue driving the vehicle for a while. Additional Information: Methods of tire pressure monitoring: 1. Direct tire pressure monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure the tire's air pressure. The pressure information is transmitted from inside the tire to a central receiver module via a wireless transmitter, and then the tire pressure data is displayed. When the tire pressure is too low or there is a leak, the system will automatically alert. 2. Indirect tire pressure monitoring: The working principle of indirect tire pressure monitoring is that when the air pressure in a tire decreases, the vehicle's weight will cause the rolling radius of that wheel to become smaller, resulting in a faster rotation speed compared to other wheels. By comparing the differences in rotation speeds between the tires, the system monitors the tire pressure. Indirect tire pressure alert systems essentially rely on calculating the rolling radius of the tires to monitor air pressure.
Was this review help?
15
1
Share
Salvador
08/16/25 1:33am
My tire pressure monitoring system sometimes doesn't display the pressure, and there are quite a few common reasons. For example, the battery in the sensor might be dead—these small batteries usually need replacement every few years, especially in cold weather when they drain faster. Or the sensor itself could be damaged, like from hitting a curb too hard. There could also be signal issues, such as strong magnetic interference nearby or when using a phone charger, which might block the signal and prevent the display from receiving data. Last time I noticed it wasn't working, I stopped and restarted the engine—usually the system resets itself. If that doesn't work, manually check the tire pressure with a gauge (they cost just a few bucks) to ensure safety. If it happens frequently, check if the sensors are loose or if the wiring is aging. I recommend regular maintenance where a technician can test the system—never ignore it, as abnormal tire pressure can easily lead to blowouts. In short, try replacing the battery or driving a few kilometers to wake up the system. If it still doesn't work, take it to a professional repair shop for diagnosis.
Was this review help?
16
3
Share
Expand All
More Forum Discussions

What are the differences between the Mercedes-Benz E260L Sport Edition and the Regular Edition?

Mercedes-Benz E260L Sport Edition and Regular Edition differences are as follows: Interior differences: The Mercedes-Benz E260L Sport Edition and Regular Edition differ in their interiors. Mercedes-Benz, a German automotive brand, is considered one of the world's most successful high-end car brands, known for its perfect technical level, rigorous quality standards, and innovative capabilities. Comfort differences: The seat padding is soft, with excellent wrapping, providing a good riding experience and a very suitable sitting posture. The issue of short rear seat cushions in the Sport Edition has not been resolved. The Regular Edition's rear seat headrests are quite comfortable. There is also a small storage compartment in the middle of the aisle.
17
0
Share

How to Replace the Battery in a Touareg Car Remote Key?

Steps to replace the battery in a Touareg remote key: 1. First, eject the mechanical key from the car key. 2. Use a screwdriver to pry open the outer shell of the Volkswagen Touareg car key by leveraging along the shell's clips. 3. Prepare a new button battery that matches the original key's battery model, which is CR2032. 4. After prying open the key shell, you will see the key battery. Remove the old button battery and replace it with the new one, making sure to distinguish the positive and negative poles (positive side down, negative side up). 5. Finally, align and snap the two halves of the key shell back together to complete the replacement.
9
0
Share

What Are the Common Automotive Repair Services?

Automotive repair services include the following: Mechanical Repair: Fixing various mechanical issues of vehicles, including engines, transmissions, chassis suspension systems, and fuel systems. Wheel Alignment: Adjusting based on the four-wheel parameters of the vehicle to ensure good driving performance and certain reliability. Body Repair and Painting: A vehicle restoration technique that involves repairing deformed parts of the car's metal body. Auto Detailing: Providing maintenance care for different parts of the vehicle according to the specific material requirements, using various auto detailing products and application techniques. Vehicle Maintenance: Regular preventive work involving inspection, cleaning, replenishment, lubrication, adjustment, or replacement of certain parts of the vehicle.
14
0
Share

How to Replace the Battery in a Renault Car Key?

Renault car key battery replacement method: 1. Insert a flat-head screwdriver into the gap of the key's back cover and gently pry it open; 2. After opening the back cover, you can see the battery inside. Remove the old battery and insert the new one into the key; 3. When installing, ensure the positive and negative poles are correctly aligned, then reattach the back cover. Renault is a French automobile manufacturer producing a variety of vehicles including racing cars, compact cars, mid-size cars, SUVs, and large vehicles (including trucks, construction vehicles, and buses). Among them, the Renault Koleos is the production model of the Koleos concept car, with its core technologies such as the engine and transmission utilizing the CMF professional four-wheel-drive SUV platform.
16
4
Share

Are the Three Major Components of the Mitsubishi Eclipse Cross Still Imported?

The three major components of the Mitsubishi Eclipse Cross are not imported but domestically produced. The three major components of a car refer to the engine, transmission, and chassis. Additionally, a car consists of two major mechanisms and five major systems. The Mitsubishi Eclipse Cross is a compact SUV under the Mitsubishi brand, with body dimensions of 4405mm in length, 1805mm in width, and 1685mm in height, and a wheelbase of 2670mm. In terms of power, the Mitsubishi Eclipse Cross is equipped with a 1.5-liter turbocharged engine across all models. This engine delivers a maximum power of 125kW and a maximum torque of 250Nm, featuring hybrid injection technology and an aluminum alloy cylinder head and block.
4
2
Share

What type of adhesive is used for car windshields?

Polyurethane sealant is used for car windshields. Below is the relevant introduction: Introduction: Polyurethane sealant is a high-strength, high-modulus, bonding-type polyurethane multi-purpose sealant. It is a single-component, room-temperature moisture-curing adhesive with high solid content, excellent weather resistance, and good elasticity. It does not produce any harmful substances during or after curing and does not pollute the substrate. Application scope: It can be used for bonding windshields and side windows in the automotive repair market, sealing welded joints in refrigerated compartments and glass curtain walls; for sealing body seams, glass joint sealing, compartment sealing, and other general gap sealing; for sealing seams in containers, box trucks, and prefabricated houses, as well as for bonding between steel and aluminum materials.
7
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.