Why is the thermometer light on the car dashboard flashing?

1 Answers
SiennaLynn
07/30/25 9:25am
When the thermometer light on the car dashboard flashes, it indicates that the coolant temperature is not within the specified range. Below are the reasons and solutions for the flashing thermometer light on the car dashboard: Reasons for the flashing thermometer light on the car dashboard: It indicates that the engine coolant temperature is too high or the engine is low on coolant. There may be a leak in the engine cooling system, such as a water pump leak, damaged pipes, or a damaged radiator, etc. You should immediately slow down, pull over, and check the coolant level. The warning light will automatically turn off once the engine temperature returns to normal or the coolant is replenished. Solutions for the flashing thermometer light on the car dashboard: If the engine overheats, do not turn it off immediately. Instead, keep the engine idling for a while and try to lower the engine temperature. Wear gloves, place a wet cloth over the engine radiator, or wrap a wet cloth around the radiator cap and gently unscrew it. Wait for the steam to slowly escape from the radiator, and once the pressure decreases, add cool water or antifreeze.
Was this review help?
19
1
Share
More Forum Discussions

What's the matter with the headlight range control malfunction?

It may be due to a damaged body height sensor, which is primarily used to collect body height signals for the control unit to adjust the headlight level. Check whether the headlight connector and the adjustment motor connector are functioning properly. Also, inspect if the headlight level sensor on the suspension is damaged. Introduction to the vehicle height sensor: Used in automotive air suspension and active suspension systems, its function is to detect the body height (the relative displacement between the body and the lower suspension arm or shock absorber lower bracket in the vertical direction). Power supply inspection: Disconnect the sensor connector, turn on the ignition switch, and check that the voltage at the power terminal of the wiring harness connector should be 12V.
20
5
Share

How Long Does It Take for a Motorcycle to Complete the Break-in Period?

New motorcycles generally have a break-in period of 1,500 kilometers. Oil Change Method During the Initial Break-in Period: There are various methods for changing the oil within this 1,500-kilometer range. It is recommended to change the oil at 300 kilometers, 600 kilometers, 1,000 kilometers, and 1,500 kilometers. How to Ride the Motorcycle During the Initial Break-in Period: For the first 600 kilometers, maintain the gear speeds as follows: first gear at 10 km/h, second gear at 20 km/h, third gear at 30 km/h, fourth gear at 35 km/h, and fifth gear at 40 km/h. Shift gears repeatedly, moving from first to fifth gear and then back down from fifth to first gear.
6
3
Share

Why is there a noise when rotating the rear wheel of a motorcycle?

The reasons for noise when rotating the rear wheel of a motorcycle: bearing damage, severe wear of components. Bearing damage: Lift the motorcycle stand, stand on the side with the chain and sprocket, hold the rear shock absorber with your left hand, grab the rear wheel with your right hand, and swing the rear wheel left and right (i.e., move it toward the left and right shock absorbers). If you feel a gap between the rear wheel and the rear axle (i.e., the rear wheel seems to wobble left and right), it indicates the bearing is faulty and needs replacement. Severe wear of components: The clutch is excessively worn and should be replaced promptly; the pulley is severely worn; gear wear (caused by insufficient oil in the gearbox or long-distance driving); wear of the rear drum brake.
14
0
Share

Can Headlight Modifications Cause Spontaneous Combustion?

Headlight modifications are the most common cause of vehicle spontaneous combustion, especially when installing low-quality aftermarket HID (xenon) lights. This is because HID lights generate extremely high temperatures, while the headlight housing has a limited heat resistance. In particular, the reflective panels inside the housing can easily melt, leading to vehicle fires. Ensure neat wiring during modification: Avoid excessively long or dangling wires and friction from movement. All electrical connections must be secure and properly insulated. Avoid installing excessive decorative lighting: By carefully handling every detail during the modification process and taking thorough safety precautions, spontaneous combustion can be prevented. After all, apart from the initial high current during startup, HID lights generally operate at lower wattage compared to halogen bulbs.
13
1
Share

Where is the turn signal flasher located in the Toyota Vios?

The turn signal flasher relay in the Toyota Vios is located at the rear of the instrument panel and can be seen after removing the instrument panel cover. Turn signals are important indicator lights that are activated when a motor vehicle is turning to alert surrounding vehicles and pedestrians. Taking the 2021 Toyota Vios as an example, it belongs to the compact car category with body dimensions of: length 4435mm, width 1700mm, height 1490mm, wheelbase 2550mm, fuel tank capacity 42l, and curb weight 1070kg. The 2021 Toyota Vios is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 110ps, maximum power of 81kw, maximum torque of 138nm, and is paired with a 5-speed manual transmission.
1
0
Share

What lights to use on sharp turns?

When driving through sharp turns, slopes, arched bridges, crosswalks, or intersections without traffic signal control at night, motor vehicles should alternately use high and low beams to signal. Here is a brief introduction to high and low beams: High beam: The intensity of the light is adjusted based on the distance of the filament. The high beam is focused, emitting parallel light that is more concentrated and brighter, capable of illuminating distant and high objects. Low beam: The low beam is positioned beyond the focal point, between 1x to 2x the focal distance, emitting light in a divergent pattern that illuminates a larger area at close range. The illumination distance of the low beam is approximately 30-40 meters.
9
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.