···
Log in / Register

Why is the Subject One Test Reservation Still Under Processing?

4 Answers
McMia
07/29/25 11:23pm

There are several possible reasons why the driving test reservation shows as under processing: The reservation deadline has not yet been reached. The number of reservations has not reached the predetermined quota, causing the deadline to be postponed. For online Subject One test reservations, the result (success or failure) is usually displayed within 24 hours after submission. If the page continues to show "under processing," it means the reservation was unsuccessful, and you need to cancel and resubmit the reservation. For first-time Subject One test reservations, the order is based on the submission time. If a reservation is canceled due to personal reasons after being successfully booked, the order is based on the cancellation time. For non-first-time reservations, the order is based on the previous test time, unless canceled for reasons beyond the applicant's control (e.g., power outage at the testing center, network failure preventing completion of the test), in which case the ranking time remains unchanged. For Subject Two and Subject Three road driving skill tests, the number of attempts must not exceed five times each (i.e., a total of ten test opportunities). If the Subject Two test shows as "under processing," it means the system has received the reservation request and is scheduling the date and session for applicants. If it remains in this status for an extended period, it indicates the request has been pushed out due to exceeding the available slots.

Was this review help?
16
3
Share
Lilian
08/16/25 1:56am

I encountered the same situation when I last booked my Subject 1 exam—the status showed 'processing' for several days without any change. I was quite anxious at the time because I had managed to squeeze in time for registration despite a busy work schedule. Later, a friend from the driving school explained that it’s mostly due to system processing delays, like slower backend reviews during peak application periods or incomplete information requiring rechecking. My advice is to wait patiently for a day or two without constantly refreshing the system, while also double-checking for any errors in your registration details, such as your ID number or contact phone. If the status remains unchanged for too long, call the local DMV directly to inquire about the specific progress—they can check internal records and expedite the process. Additionally, avoiding peak periods like month-end or weekends when booking can reduce such issues. In short, don’t worry too much—delays like this are usually normal, and focusing on reviewing Subject 1 knowledge is what really matters.

Was this review help?
11
5
Share
Expand All
McAxel
10/18/25 8:29am

I understand the anxiety when your subject one exam application remains stuck in processing, especially if you're in a hurry to take the test. Common reasons include system backlog due to high application volumes (like post-holiday rushes), your file possibly requiring manual verification of security details, or network issues causing failed submission. Here's what to do: First, don't panic—check the website for status updates. If none, allow ~48 hours as system buffer time. For urgent cases, contact the DMV via their official app or hotline with your ID number to report the stalled status for prioritized handling. Pro tip: Schedule exams 1-2 weeks early to avoid peak periods, routinely check emails for notifications, and ensure submitted details are accurate to prevent review delays. Always address issues promptly through proper channels if they arise.

Was this review help?
15
3
Share
Expand All
MacAshley
12/02/25 2:16am

The subject one appointment is under review with no progress, which happens frequently due to sometimes slow approval processes. For example, system congestion may slow down processing, or your application might be flagged for further review. Here are some suggestions: First, stay calm and avoid repeatedly operating the app to prevent accidental clicks; second, double-check that your application information is correct; third, if there's no change after three days, proactively contact the DMV for inquiries; fourth, try logging in with a different browser to check the status. Additionally, while waiting for the result, focus on practicing questions instead of getting distracted, so you don't waste energy.

Was this review help?
15
1
Share
Expand All
More Forum Discussions

How to Test the Electronic Throttle Pedal for Faults?

Electronic throttle pedal testing methods are as follows: 1. Electronic throttle pedals are equipped with a pedal position sensor, through which the ECU can determine how much the throttle pedal has been depressed. Testing the electronic throttle pedal requires using a multimeter and locating the pedal's wiring connections. 2. Modern vehicles use electronic throttle body designs, where the throttle pedal is equipped with position sensors. When the pedal is depressed, the sensor sends signals to the ECU, which then controls the throttle opening. The advantage of electronic throttle bodies lies in their ability to more precisely control engine air intake, and other electronic systems can also control the throttle when necessary.
16
1
Share

Is BYD a Domestic Car?

BYD is a domestic car, and the specific introduction is as follows: 1. The concept of a domestic car is: cars produced or assembled in mainland China are called domestic cars. 2. BYD was established in Shenzhen in November 2003 and has now become the headquarters of BYD and the main production base for batteries. It receives production, market, and service information from across the country, providing timely feedback, processing, and adjustments, forming a nationwide point-to-line, line-to-surface integrated information processing system from users and dealers to design and production. The production and assembly processes of BYD are all carried out in mainland China, so BYD is a domestic car.
3
3
Share

How Often Should the Oxygen Sensor Be Replaced?

There is no fixed replacement interval for the automotive oxygen sensor, but it is recommended to replace the oxygen sensor for vehicles that have traveled over 100,000 kilometers. More information about the automotive oxygen sensor is as follows: 1. The automotive oxygen sensor is a critical feedback sensor in the electronic fuel injection engine control system. It is a key component for controlling vehicle exhaust emissions, reducing environmental pollution, and improving the fuel combustion quality of the engine. Oxygen sensors are installed on the engine's exhaust pipe. 2. Once the oxygen sensor fails, the computer of the electronic fuel injection system will not be able to obtain information about the oxygen concentration in the exhaust pipe, thus failing to provide feedback control for the air-fuel ratio. This can lead to increased engine fuel consumption and exhaust pollution, as well as engine issues such as unstable idling, misfires, and surging.
18
1
Share

What is the Diagnostic and Troubleshooting Mnemonic for Car Air Conditioning Failures?

Car air conditioning system fault diagnosis mnemonic is: one look, two listen, three touch, four measure. Specifically: 1. One look: Generally, large buses have a separate glass inspection window on the high-pressure liquid line of the air conditioning refrigeration system, while smaller vehicles usually have the inspection window on the dryer filter tank. During the operation of the air conditioning system, the refrigerant flow can be roughly judged by observing through the glass inspection window. 2. Two listen: Listen for any abnormal sounds from the machine operation, mainly including: (1) Listen for any abnormal noise from the compressor operation, if there is, it is abnormal; (2) Listen for any abnormal noise from the blower, condenser fan motor, etc., if there is, it is abnormal; (3) If there is a belt sound, it indicates belt slippage; (4) If there is a screeching sound, it is caused by the aging of the electromagnetic clutch magnetic coil, insufficient magnetic attraction, and clutch disc slippage. 3. Three touch: When faults occur in the refrigeration system and its main components, it often leads to abnormal surface temperatures of the system pipelines and main components. Therefore, the working state of the system and the performance of the main components can be roughly judged based on the changes in surface temperature. During specific inspections, the touch method can be used for judgment. 4. Four measure: While using the look, listen, and touch diagnostic methods, if the pressure gauge can measure the high and low side pressures of the refrigeration cycle system, the judgment results will be more accurate.
4
3
Share

What are the pros and cons of aluminum cars?

The advantages of aluminum car bodies are lighter weight and higher strength. The disadvantages are that once a collision occurs, repairs are more difficult and the repair costs are also relatively high. Here is relevant information: 1. Aluminum car bodies are used by many brands, such as Jaguar and Audi. After a collision, aluminum-bodied cars are quite difficult to repair and cost more money to fix. Therefore, if you purchase an aluminum-bodied car, you must be very careful during use. 2. Many high-performance cars and sports cars also use aluminum bodies to reduce the overall weight of the vehicle. However, using aluminum to manufacture car bodies is more expensive, so cars with aluminum bodies are also more costly. There is no visible difference between aluminum-bodied and steel-bodied cars from the outside.
1
1
Share

What does understeer mean in driving?

Understeer describes a loss of control during vehicle cornering, technically termed as insufficient steering. Front-wheel-drive vehicles often exhibit this phenomenon when approaching cornering limits. More details about understeer are as follows: 1. From the perspective of vehicle handling and safety, front-wheel-drive cars have their engine and drive shaft center located at the front, with drive wheels being the front pair. During cornering, the front weight shifts forward due to inertia, potentially exceeding the front tires' road adhesion limit, causing insufficient steering - this explains the mechanism of understeer. When experiencing mild understeer, simply easing off the throttle can restore vehicle control. 2. When taking corners at excessive speed, the car's nose may continue straight instead of following steering input. In such cases, releasing the throttle and gently applying brakes will realign the vehicle. If the steering angle is excessive, slight counter-steering can eliminate understeer.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.