Why is the subject 2 test scheduled 10 days later?

1 Answers
JeffreyDella
07/30/25 7:12am
Relevant regulations: After completing subject 1 and obtaining the study driving certificate, candidates for the C license can schedule the subject 2 test 10 days later, while those for the A or B license must wait 20 days. According to Article 139 of the "Regulations on the Application and Use of Motor Vehicle Driving Licenses" by the Ministry of Public Security: 1. Article 17: For first-time applicants or those applying to add a permitted driving type, the vehicle management office shall issue a study driving certificate within one day after passing the subject 1 test. 2. Article 40: For first-time applicants or those applying to add a permitted driving type, the following conditions must be met to schedule the subject 2 test: (1) For small cars, small automatic transmission cars, low-speed trucks, three-wheeled cars, small automatic transmission passenger cars for the disabled, wheeled self-propelled machinery, trolleybuses, and trams, the test can be scheduled 10 days after obtaining the study driving certificate. (2) For large buses, tractors, city buses, medium buses, and large trucks, the test can be scheduled 20 days after obtaining the study driving certificate.
Was this review help?
1
5
Share
More Forum Discussions

What Does Engine Piston Slap Sound Like?

Engine piston slap is a crisp, rhythmic metallic knocking sound that varies with temperature changes. The causes of engine piston slap include: 1. Excessive wear between piston and cylinder leading to oversized clearance; 2. Incorrect piston installation orientation or piston deformation; 3. Poor lubrication of cylinder walls; 4. Bent or twisted connecting rods; 5. Clogged oil passages; 6. Severe carbon buildup in combustion chamber; 7. Excessive fuel injection advance angle; 8. Overly rapid combustion of air-fuel mixture causing excessive cylinder pressure; 9. Overly thin cylinder gasket or excessive wear on cylinder block top surface, resulting in increased compression ratio in diesel engines.
11
5
Share

What is the minimum ground clearance of the Audi Q3?

The minimum ground clearance of the Audi Q3 is 152mm. Its body dimensions are: length 4481mm, width 1848mm, height 1616mm, wheelbase 2680mm, fuel tank capacity 60L, luggage compartment capacity 450L, and tire specification 235/55R18. The Audi Q3 is equipped with a 1.4T turbocharged engine, with a maximum power of 110kW, maximum power speed of 5000 to 6000 rpm, and maximum torque of 250Nm. It is paired with a 7-speed dual-clutch transmission, and features a MacPherson independent front suspension and a multi-link independent rear suspension.
8
3
Share

How to Prevent Car Battery Drain in Winter?

Methods to prevent car battery drain in winter are: 1. Avoid using electrical devices in the vehicle after turning off the engine; 2. Start the vehicle at least once a week if it remains unused for extended periods; 3. Regularly monitor the battery's charging status and check for any damage. Causes of car battery drain in winter include: 1. Prolonged vehicle inactivity; 2. Forgetting to turn off lights and onboard electrical appliances; 3. Leaving the air conditioning on before shutting down the engine; 4. Playing high-power audio systems while idling; 5. Frequent vehicle startups. Consequences of car battery drain are: 1. Shortened battery lifespan; 2. Inability to start the car, rendering it unusable; 3. Reduced starter motor service life.
19
4
Share

What is the difference between N gear and D gear?

The difference between N gear and D gear is: 1. Different usage: N gear is neutral gear, which can be used when parking; D gear is drive gear, which can be used when driving. 2. Different applications: N gear is suitable for manual transmissions and automatic transmissions; D gear is suitable for automatic transmissions. Other gears in an automatic transmission are: 1. P gear is parking gear; 2. R gear is reverse gear; 3. L gear is low gear; 4. S gear is sport mode. The correct way to start a car is: 1. Move the gear selector to the intended driving position before pressing the accelerator pedal; 2. Do not press the accelerator pedal abruptly, but press it slowly to accelerate gradually.
13
0
Share

How to Cancel the Maintenance Reminder on the Ford Kuga Dashboard?

Ford Kuga Maintenance Reminder Reset Procedure: First, sit in the car and close the door, turn the ignition key to the second position, press the accelerator and brake pedals simultaneously to the floor, wait for about 10 seconds until the information center displays a prompt, then continue holding the pedals for about 30 seconds until the information center shows "OIL LIFE RESET COMPLETE," indicating the maintenance reset is complete. Below is some relevant information about the Ford Kuga: 1. Exterior: The Ford Kuga continues the excellent design of the Ford family, perfectly creating a dynamic and powerful yet elegant image. The overall appearance highlights a rugged style, while the details showcase refined taste. The Kuga's body size is relatively compact, with a wheelbase increased by 50mm compared to the Focus. The 2690mm wheelbase is enough to stand out among its peers. 2. Interior: A sense of quality is everywhere, with every detail thoughtfully designed: the innovative multi-color ambient lighting, the SONY 9-speaker system, and the luxurious leather seats all enhance visual, auditory, or tactile experiences. The spacious and open interior not only accommodates travel necessities but also fills the journey with joy. 3. Powertrain: The Ford Kuga is equipped with the EcoBoost GTDi gasoline direct-injection turbocharged engine, which combines fuel economy and low emissions, paired with the SelectShiftTM 6-speed automatic transmission and low-rolling-resistance all-season tires.
1
5
Share

Can the S gear be used when going downhill?

Can the S gear be used when going downhill? The S gear is the sports mode of a car. In sports mode, the transmission can shift freely, but the shifting timing is delayed, keeping the engine at high revs for a longer time. This allows the car to move at low gear and high revs for an extended period, thereby achieving greater torque output and acceleration. The S gear is typically used when overtaking or going uphill. Situations where the S gear should not be used include: 1. Using the S gear when starting off can have a counterproductive effect on speed increase; 2. Do not use the S gear during high-speed cruising. The car's gears include: 1. D gear is the drive gear; 2. P gear is the parking gear; 3. R gear is the reverse gear; 4. L gear is the low-speed gear.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.