Why is the sound low when playing music via Bluetooth in the car?

1 Answers
LaJosephine
07/30/25 9:46am
Low sound when connected to the car via Bluetooth is a common issue. First, check if the call audio volume on your phone is turned on. If not, the sound will naturally be low. Additionally, the following factors can also cause low sound: compatibility issues, interference, lag, or damage. Compatibility: If the volume is turned on, the issue might be Bluetooth incompatibility. Each car is equipped with different Bluetooth devices, and if the Bluetooth on your phone and the car stereo are incompatible, it can affect sound transmission. Interference: As the car moves, the geographical location keeps changing, and the high-frequency connection between the car and the phone can be easily affected by other signals, leading to unstable Bluetooth connections. In this case, turning off Bluetooth and reconnecting after a short wait may help. Lag: Over time, phones accumulate more and more operational junk, which can eventually cause Bluetooth lag. To resolve this, unpair the Bluetooth device, restart your phone, and then pair it again. Damage: Bluetooth device damage is also a possibility, including issues like microphone blockage, transmitter failure, electronic component leakage, or audio damage. Specific repairs may be needed in such cases. Solutions for low sound when playing music via Bluetooth in the car: The media audio and call audio on your phone are set separately. If the music volume is low when connected via Bluetooth, it might be because the media audio on your phone is set too low. Alternatively, the volume on the car's navigation system might be set too low. If adjusting the volume doesn’t help, try disconnecting and reconnecting the Bluetooth.
Was this review help?
7
5
Share
More Forum Discussions

How to Remove the Main Airbag of Peugeot 408?

Locate the screw holes on the left and right sides of the steering wheel and loosen them using a T40 tool. After loosening the screws, detach the driver's airbag from the steering wheel, but do not remove it completely. Use a small flat-head screwdriver to release the fixed clip of the wiring harness, and then use the screwdriver to detach the yellow locking mechanism of the connector. Use the small flat-head screwdriver to release the black part of the connector. Once the main airbag wiring harness is disconnected, remove the main airbag.
20
1
Share

How to reset the maintenance reminder on a Volkswagen Polo?

First, turn off the ignition key. Press and hold the maintenance reset button, then turn on the ignition key while continuing to hold the button. Wait for a moment until the maintenance interval indicator enters reset mode. Release the maintenance reset button, then press the button (Button A) within 20 seconds. The indicator will return to normal display and the maintenance light will be reset.
18
3
Share

How to Reset the Tire Pressure on a 2020 Mitsubishi Outlander?

First, inflate the tires to the normal pressure range. Start the engine. Use the control buttons on the left side of the steering wheel to operate the trip computer. Find the "Tire" option and click to enter. Press and hold the trip computer control button on the left control panel to reset.
18
4
Share

How to Drive Out When the Distance Between Cars is Small During Parallel Parking?

Drive forward until parallel with the front car, maintaining a distance of about 20 centimeters between the two vehicles, then turn the steering wheel fully to the right and reverse. After seeing the full view of the rear car's front in the left rearview mirror, straighten the wheels while turning the steering wheel fully to the left. Once the car body is level, straighten the wheels.
1
0
Share

How to Adjust the Height and Left-Right Alignment of Car Headlights?

Choose a flat surface, with the wall head five meters away from the wall, ensuring your body is perpendicular to the plane of the wall. The left and right heights should be the same. Drive the car into a flat, open space, measure a distance of 30 meters, and ensure the light beam is appropriate at both near and far distances of 30 meters.
18
0
Share

How to Deal with Blackened Diesel?

It can both saturate olefins and break down nitrogen-containing compounds. Extraction process: A solvent is used to extract nitrogen-containing compounds, which is effective and low-cost, representing a proprietary technology. First, let the diesel sit for a period of time to allow full oxidation and discoloration, and then distill it.
20
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.