Why is the Smart Car Key Button Not Working?

2 Answers
VanLouis
07/25/25 4:40am
Smart car key buttons may not work due to obstructions like buildings between the vehicle and the key, or insufficient battery power preventing the smart key's radio waves from reaching the vehicle. Method for Smart Car Key Entry: When the key approaches the vehicle body, the doors will automatically unlock and the anti-theft alarm status will be deactivated. The address indicator light will flash twice, allowing you to directly open the door. When the key moves away from the vehicle body, the doors will automatically lock and enter the anti-theft mode. At this time, the turn signals will flash once, and the horn will emit a brief beep. Method for Opening the Trunk with a Smart Car Key: Press the unlock button on the remote once, or hold the unlock button for more than 2 seconds. The rear lights will flash three times, indicating that the locked trunk has been successfully unlocked.
Was this review help?
10
4
Share
OZane
08/10/25 5:29pm
Today my smart key button kept malfunctioning, which really affected my mood. There could be several possible reasons, with the most common being a depleted key battery. Those CR2032 coin batteries tend to run out after about a year of use. Replacing the battery is quite simple – there are plenty of tutorials on YouTube, usually involving prying open the key casing with a screwdriver and swapping the battery. Sometimes, the internal chip can become loose or the buttons short-circuit after dropping the key, causing malfunctions. I once experienced this when my key got stuck after a fall in a parking lot. Signal interference is another issue, especially near large electronic devices or in multi-story parking garages where metal structures can block signals. Trying to restart the car engine or moving to a different location might help. For maintenance, avoid exposing the key to moisture or high temperatures – storing it in a dry pouch can prevent issues. I recommend starting with a battery replacement; if that doesn’t work, visit a professional shop to check the key interface or reprogram it. Don’t overlook the car battery’s condition either, as low voltage can affect signal reception.
Was this review help?
7
1
Share
Expand All
More Forum Discussions

What is the 911 car?

The Porsche 911 is a sports car produced by Porsche AG of Stuttgart, Germany in 1963, designed by Ferdinand Alexander Porsche. The Porsche 911 has gone through seven generations of models, featuring unique styling and excellent durability, making it one of the legendary models and a representative of mid-rear-engine sports cars. The Porsche 911 series is divided into the Carrera series, Targa series, Turbo series, Turbo S series, and GT series. The 911 is the successor to the Porsche 356 model. The 911 replaced the previous 4-cylinder engine and was the first to feature a rear-mounted six-cylinder horizontally opposed engine. Although the 911's power output was only 130 horsepower at that time, it could still accelerate from 0 to 100 km/h in 9.1 seconds, with a top speed of 210 km/h. The 911 models from 1973 to 1989 belong to the G series, during which the displacement of the 911 models increased from 2.7L to 3.2L.
3
5
Share

Where is the Volkswagen Bora's ESP switch located?

After starting the Volkswagen Bora, the ESP (Electronic Stability Program) system is activated by default. There is only one switch button, located at the lower left corner of the center console. Additional information: The role of the Bora's ESP in driving safety: 1. Adjusts braking force distribution to prevent the rear wheels from locking up first. It typically fails only when there is a hardware malfunction in the module; 2. Prevents wheel lock-up by calculating the vehicle's slip rate and controlling it near the peak adhesion coefficient, which is a passive safety control; 3. Traction Control System (TCS), which operates under conditions such as low-adhesion road surfaces where the drive wheels slip. The TCS requests the engine to reduce torque while lightly applying the brakes for smooth vehicle acceleration; 4. Vehicle Dynamic Control (VDC) system, which primarily corrects understeer and oversteer by actively pressurizing individual wheels. Both TCS and VDC involve active pressurization, meaning they can apply pressure to the brake lines without requiring brake pedal force.
2
2
Share

What are the differences between the 2018 Lavida and the 2019 Lavida?

Below are the differences between the 2018 Lavida and the 2019 Lavida: 1. Difference one: Different emission standards: Most 2018 Lavida models comply with the China V emission standard; the 2019 Lavida models all meet the China VI emission standard. 2. Difference two: Exterior design: The 2019 Lavida has some new changes compared to the older model in terms of the front face, body length, width, height, and rear. 3. Difference three: Interior design: The most noticeable change is the more comfortable dashboard, featuring a brand-new center console screen and a vibrant steering wheel; the air vents are three large circular outlets, and the direction of airflow can be adjusted by turning the central switch. 4. Difference four: Safety features: Side airbags for the front and rear seats and the main airbag are only available in higher trims, but safety features such as tire pressure monitoring, ESP stability control system, seatbelt reminder, and child locks are standard across all models.
9
5
Share

Why Does the Car Engine Sound Louder in Hot Weather?

Here are the specific reasons why the car engine sounds louder in hot weather: Poor Acceleration Performance: When pressing the accelerator, you may notice poor acceleration, lack of power, and a hysterical sound from the engine. This is most likely to occur when the engine is hot, cold, or low on oil. Dirty Gasoline: Issues such as air filter, spark plugs, ignition wires, fuel, fuel filter, carburetor, or fuel pump problems. Check if the air filter is dirty, if the spark plugs are old and need replacement, if the ignition coil is faulty, or if the gasoline is contaminated. While driving, acceleration may seem normal, and ignition might appear fine, but when maintaining a constant speed, you might notice that the engine RPM is too high while the speed doesn't increase accordingly. Try checking the coolant, oil pressure (too high or too low), the oil pressure gauge, or the ignition timing settings, as these could also cause such symptoms. Other possible causes include internal engine issues, such as a clogged EGR valve.
13
5
Share

Why Does a Motorcycle Burn Engine Oil in Summer?

Motorcycle burning engine oil is due to the piston ring oil ring having insufficient elasticity and excessive light leakage. Insufficient elasticity and excessive light leakage: When the piston ring oil ring has insufficient elasticity and excessive light leakage, it leads to burning engine oil, which is a problem with the piston ring itself. If the gap between the valve stem and the valve guide is too large, or the valve oil seal does not seal tightly, this burning oil phenomenon is unrelated to the piston ring. Even after replacing the piston ring, the engine oil may still burn. Cylinder size deviation and excessive ovality: If the cylinder size is out of tolerance and the ovality is excessive, or if the surface has scratches or grooves, the oil ring cannot scrape off the excess oil on the cylinder wall, causing oil to enter the combustion chamber and participate in combustion. If the taper ring is installed upside down, it will scrape oil upward, also increasing oil consumption. If the piston rings are not staggered in position during assembly and are aligned in a straight line, oil consumption will sharply increase.
20
1
Share

Why is the Huasong 7's fuel consumption so high?

The official combined fuel consumption of the Huasong 7 is around 9.6L/100km. During the running-in period of a new car, the fuel consumption is slightly higher, which is normal. After the running-in period, the fuel consumption usually decreases by one to two units. However, fuel consumption is greatly affected by road conditions and personal driving habits, and it could even double. Below are detailed introductions about the Huasong 7: 1. Exterior: The Huasong 7's exterior resembles the Alphard, with a large blackened front grille that connects with the headlights to form a distinctive 'T' shape. The upper part of the grille is decorated with two thick chrome strips, with the logo positioned in between, giving it high recognition. 2. Interior: The interior design of the new car is stable and elegant, leaning towards a sedan style. The multifunctional three-spoke steering wheel is exquisitely shaped, and the center console layout is clear. The top model also features a large LCD screen in the center. The new car adopts a 2+2+3 seven-seat space layout and comes with abundant configurations.
16
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.