Why is the Santana Lacking Coolant?

1 Answers
LaNatalie
07/29/25 8:16pm
The Santana may lack coolant due to leaks in the engine piping system, requiring a visit to a repair shop for professional inspection to locate the leakage point. Alternatively, it could result from prolonged vehicle age causing pipe aging or radiator leakage. Introduction to Automotive Coolant: Automotive coolant, fully named automotive antifreeze coolant, refers to a cooling liquid with antifreeze properties. To ensure the car remains operational during winter low temperatures, engine coolants incorporate substances that lower the freezing point of water, preventing the cooling system from freezing in cold weather. Functions of Coolant: Coolant prevents the cooling liquid from freezing during parking in cold seasons, which could otherwise crack the radiator or damage the engine cylinder block.
Was this review help?
7
4
Share
More Forum Discussions

What does the load index of a tire mean?

The load index of a tire refers to the load capacity indicator, which is a numerical code representing the maximum load a tire can bear under specified usage conditions. The load index ranges from 70 to 109, corresponding to maximum load capacities from 335 to 1030 kg. Exceeding the tire's maximum load capacity won't cause immediate damage, but prolonged overloading can lead to tire fatigue, shorten its service life, and in severe cases, may result in a blowout. Tires are circular elastic rubber products mounted on metal rims, designed to support the vehicle body, absorb external shocks, maintain contact with the road surface, and ensure driving performance.
19
1
Share

What Causes the Brake Light to Illuminate on a Hyundai Verna?

The reasons for the brake light illuminating on a Hyundai Verna are: 1. Lack of brake fluid; 2. Damaged taillight bulb; 3. Severely worn brake pads. The brake light is installed at the rear of the vehicle, with a main color of red, enhancing the penetration of the light source so that vehicles behind can detect the vehicle ahead under low visibility conditions, thereby helping to prevent rear-end collisions. Taking the 2020 Hyundai Verna as an example, it belongs to the compact car category, with body dimensions of: length 4300mm, width 1705mm, height 1460mm, a wheelbase of 2570mm, a fuel tank capacity of 43l, and a curb weight of 990kg.
11
3
Share

What Causes Steering Wheel Vibration at 100 km/h?

The causes of steering wheel vibration at 100 km/h are: 1. Force feedback effect; 2. Issues with the vehicle's tires; 3. Deformation of the front wheel rim or unequal number of tire bolts; 4. Loose installation of transmission system components; 5. Bent drive shaft, power imbalance, or deformation of the front axle; 6. Shock absorber malfunction. The function of the steering wheel is to convert the force applied by the driver to the edge of the steering wheel into torque, which is then transmitted to the steering shaft. The operating method of the steering wheel is: 1. Place both hands appropriately on the 9 o'clock and 3 o'clock positions of the steering wheel; 2. Naturally grip the wheel with four fingers inward and extend the thumbs naturally along the edge of the steering wheel.
9
5
Share

Where is the computer interface of Peugeot 408 located?

The computer interface of the Peugeot 408 is located under the cover panel beneath the buttons on the left front side of the driver's seat. Open the cover panel to find the green connector, which is the computer interface. Additionally, there are jack and USB interfaces inside the front center armrest box. Taking the 2020 Peugeot 408 as an example, its body dimensions are: length 4750mm, width 1820mm, height 1488mm, wheelbase 2730mm, fuel tank capacity 53l, and luggage compartment capacity 455l. The 2020 Peugeot 408 features a MacPherson independent front suspension and a torsion beam non-independent rear suspension. It is equipped with a 1.2t turbocharged engine, delivering a maximum horsepower of 136ps, maximum power of 100kw, and maximum torque of 230nm.
9
0
Share

Why Does a Manual Transmission Car Stall When Braking?

Manual transmission cars may stall when braking due to faults in the throttle position sensor, air flow sensor, intake pressure sensor, crankshaft position sensor, or camshaft position sensor. Below is an introduction to the causes of stalling in manual transmission cars: 1. Fuel Pump: Stalling may occur due to a damaged fuel pump, ruptured fuel line, or clogged carburetor inlet. 2. Clutch: The clutch, as the name suggests, is a device that separates and connects the engine's power output. Currently, the most commonly used clutch can be simply divided into two main parts: the driving plate and the driven plate. The driving plate is connected to the engine crankshaft, while the driven plate is connected to the transmission input shaft via splines.
1
1
Share

Which BMW model comes with a display key?

2019 BMW 5 Series New Energy Edition all come with display keys. Below are the details of the BMW 5 Series New Energy Edition: 1. Specifications: The BMW 5 Series display touch key is equipped with a 2.2-inch LCD screen that can display various vehicle information. The new energy version of the BMW 5 Series currently on sale adopts a plug-in hybrid mode, all meeting the China V emission standard. 2. Power: The 2019 BMW 5 Series New Energy Edition is equipped with a 2.0T engine, model B48B20C, using a single-motor drive mode. The combined output power is 185 kW, the maximum torque is 420 N·m, the top speed is 225 km/h, the 0-100 km/h acceleration time is 6.9 seconds, and the combined fuel consumption per 100 km is around 7.2L.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.