Why is the right side narrow when reversing into the right parking space?

2 Answers
CourtneyDella
07/25/25 4:59pm
Right side being narrow when reversing into the parking space is due to turning the steering wheel too early or driving too fast when entering. When reversing, always pay attention to both rearview mirrors. If you notice the rear corner is slightly narrow, immediately straighten the steering wheel or make slight reverse adjustments. In summary, driving too slowly, too quickly, or turning the steering wheel too fast or slow can all affect whether the right or left side becomes narrow. Maintaining a normal speed and finding the right timing to turn the steering wheel can correct this issue. Tips for reversing into a parking space: Before turning the steering wheel, keep the inner side of the car as close as possible to the obstacle to leave more turning space for the outer side. Also, be mindful of the front corner of the outer obstacle and the rear obstacle to avoid collisions. Maintain a distance of about 1.5 meters from the adjacent car, start reversing, turn the steering wheel fully as needed, and straighten it once the car is in the space. Continue reversing until the parking is complete.
Was this review help?
7
4
Share
BryceFitz
08/11/25 9:59pm
The right side being too narrow during right reverse parking basically means there's an issue with your steering wheel operation, which I think is quite common. When I practice driving myself or teach others, I often encounter this situation: if you turn the steering wheel too early when reversing to the right, the rear of the car will turn right prematurely, resulting in very narrow space on the right side; or if your initial parking position is too close to the right parking line, it naturally feels cramped when reversing. I suggest you try this next time: adjust the car body before starting, keep it centered, and wait until the rear of the car is almost entering the parking space before turning the steering wheel. Don’t rush to turn the wheel fully, and the right side won’t be so narrow. The key to reverse parking is practicing your judgment. Practice a few more times in an open space, and you’ll find it quite easy once you get the hang of it. Don’t always focus on one point; use the rearview mirrors more to see the overall space, which can save you a lot of trouble.
Was this review help?
5
2
Share
Expand All
More Forum Discussions

What are the hazards of not repairing chipped car paint?

Delaying paint repair may allow rainwater to penetrate the paint surface, leading to rust and corrosion. Since car paint provides excellent protection against acid rain, high temperatures, and other elements, prompt touch-up is essential for severe scratches. Solutions for chipped car paint: For minor scratches that only affect the top clear coat, waxing can restore the damaged area. If the base coat is partially exposed or missing, DIY touch-up is possible by purchasing a matching paint pen kit online, which includes necessary tools like sandpaper, filler, and polishing compounds. For deep scratches reaching the primer layer or causing body deformation, immediate professional repair at an auto body shop or 4S dealership is required. Car paint maintenance methods: Regular car washing; Waxing prevents oxidation, isolates static electricity, enhances gloss, and shields paint from dust and pollutants; Crystal coating applies a hard, glossy polymer film that cures on the surface for protection; Glaze treatment penetrates the paint to form a reinforcing mesh protective layer.
10
5
Share

Does a domestically produced car count as a stock car if it's been in inventory for 6 months?

Six-month-old domestically produced cars are considered stock cars. Below are several levels of stock cars: 1. First-level stock cars: These are vehicles that have not been sold within 3 to 6 months from the production date, offering high cost-performance. The issues with first-level stock cars may include deteriorated engine oil and the need for paint maintenance. After purchase, it's advisable to change the engine oil and apply wax to protect the paint. 2. Second-level stock cars: These have been in inventory for 6 to 12 months. Such cars may face problems like deteriorated engine oil due to prolonged storage, potential deformation of tires from long-term pressure on one spot, and possible rust on the body. 3. Severely stocked cars: Models that have been in inventory for over a year are not recommended, as they may have quality issues and very low market acceptance.
1
2
Share

What is the ground clearance of the Mazda CX-4?

The ground clearance of the Mazda CX-4 is 206mm. The chassis refers to the combination of the transmission system, running gear, steering system, and braking system in a vehicle. It supports and installs the car engine and its various components and assemblies, forming the overall shape of the vehicle, bearing the engine power, and ensuring normal driving. Taking the 2021 automatic two-wheel drive Skyactiv-G Youth Edition Mazda CX-4 as an example, the vehicle's dimensions are 4637mm in length, 1855mm in width, and 1524mm in height, with a wheelbase of 2700mm. The body structure is a 5-door, 5-seat SUV, equipped with 2.0L and 2.5L naturally aspirated engines, matched with a 6-speed automatic transmission. The front suspension type is MacPherson independent suspension, and the rear suspension type is E-type multi-link independent suspension. The drive method is front-engine, front-wheel drive.
10
4
Share

Where is the VIN number located on the Mercedes-Benz ML350?

Mercedes-Benz ML350's VIN number is located under the front passenger seat. Adjust the power seat to its rearmost position, and you will find a small opening on the floor mat. After lifting it, the VIN can be located. Additional information about the Mercedes-Benz ML350 is as follows: 1. The Mercedes-Benz ML350 is an imported vehicle, currently discontinued, with the last available model being the 2015 version. The 2015 Mercedes-Benz ML350 is positioned as a mid-to-large SUV, available in both gasoline and diesel versions. 2. Dimensions are: 4844/1926/1796mm (length/width/height), with a wheelbase of 2915mm. 3. It features a unibody design, enhancing driving comfort while significantly improving the vehicle's ability to withstand high external loads, providing passengers with more reliable safety. 4. Mercedes' exclusive 7G-TRONIC seven-speed automatic transmission delivers smooth shifting and outstanding handling. 5. The masterpiece of Mercedes' century-old four-wheel-drive technology, the 4MATIC permanent all-wheel-drive system combined with the 4ETS electronic traction system, enables easy conquering of various challenging terrains, making the M-Class excel in both on-road and off-road performance.
6
3
Share

What brand of tires does the GAC Toyota Levin use?

The tires on the GAC Toyota Levin are from Bridgestone. The tire size specifications for the Levin are 225/45R17 and 205/55R16, which vary depending on the vehicle configuration. Additional details about the Levin are as follows: 1. Built on the GA-C platform under the TNGA architecture, the overall design style is more youthful and dynamic. The exterior changes are quite noticeable, with the front fascia featuring more lines compared to the previous model, raised front fenders on both sides, and headlights designed in a hook shape, complemented by a black mesh grille, giving it a touch of fashionable flair. At the rear, a black horizontal chrome strip connects the taillights on both sides, with black lower cladding wrapping around the rear. 2. The interior design is more streamlined and layered, with optimized button layouts and added storage spaces for commonly used items. 3. The cabin features a luxurious interior that combines a premium feel with meticulous craftsmanship, achieved through well-balanced lines. The use of soft plastic materials has been significantly increased, with a Starry Gray interior that conveys a sense of sophistication and freshness through bright blue-gray tones. The seats utilize the latest TNGA architecture seats, offering excellent support and enveloping comfort.
9
2
Share

How many cylinders does the BMW X5 engine have?

BMW X5 offers two engine options: 2.0t and 3.0t. The 2.0t is a 4-cylinder engine, while the 3.0t uses a 6-cylinder inline engine. 2.0t engine: Maximum power 195kW, maximum horsepower 265Ps, maximum torque 400Nm. For a mid-to-large SUV like the BMW X5, if it's equipped with a 2.0T engine, it would undoubtedly be the highest power version of the 2.0T. Even with the 2.0T version, its 0-100km/h acceleration can still be achieved in under 7 seconds, which is quite impressive performance. 3.0t engine: Maximum power 250kW, maximum horsepower 340Ps, maximum torque 450Nm. Since it only has one turbocharger, this 3.0T engine isn't particularly outstanding, but 340 horsepower and 450Nm of torque are not insignificant for a mid-to-large SUV. When you press the accelerator, you'll still experience seemingly bottomless power.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.