Why is the reversing radar not beeping?

What Causes Oil Leakage in the Haval H6 Shock Absorber?

Haval H6 shock absorber oil leakage is caused by damage or aging of the sealing ring, which is used to suppress the oscillation when the spring rebounds after absorbing shock and the impact from the road surface. Shock absorbers are widely used in automobiles to accelerate the attenuation of frame and body vibrations, thereby improving the vehicle's ride comfort. When driving on uneven roads, although the shock-absorbing spring can filter out road vibrations, the spring itself still has reciprocating motion, and the shock absorber is used to suppress this spring bounce. The Haval H6 is the flagship model of the Haval brand. In terms of body dimensions, its length, width, and height are 4640mm, 1825mm, and 1690mm, respectively.

5

Share

What is the purpose of the 0.0 on Volkswagen's dashboard?

The function of the 0.0 button on Volkswagen's dashboard is to adjust the dashboard data, primarily used for resetting the trip mileage. Introduction to Volkswagen: Volkswagen is an automobile manufacturing company headquartered in Wolfsburg, Germany, founded by Ferdinand Porsche on March 28, 1937. The company owns brands such as Porsche, Lamborghini, Audi, Bugatti, and Bentley. Introduction to the car dashboard: The car dashboard is a device that reflects the working conditions of various vehicle systems. Various indicator lights or warning lights are installed under the dashboard, such as: coolant level warning light, fuel level indicator, washer fluid level indicator, charging indicator, high/low beam indicator, transmission gear indicator, ABS (Anti-lock Braking System) indicator, traction control indicator, airbag warning light, etc.

16

3

Share

How to Deal with Paint Spots on the Car?

Methods to deal with paint spots on the car: 1. Use a towel dipped in banana oil to gently wipe the paint spots, which can dilute the paint and effectively remove it, then rinse with clean water; 2. Gasoline can dissolve paint, with good effect and no corrosiveness, and the steps are the same as with banana oil; 3. Paint can be removed by wiping with alcohol (industrial alcohol)—use a soft cotton cloth dipped in alcohol and gently wipe the paint; 4. Essential balm can dissolve paint and can also be used to clean paint spots, with the same operation as alcohol; 5. Asphalt cleaner can also dissolve paint—spray it evenly on the paint spots, wait for a while to soften and dissolve the paint, then wipe with a towel and rinse with clean water.

11

1

Share

Does Mixing Engine Oils Affect the Car?

Mixing engine oils can indeed affect the car, especially during winter. Combining oils of different specifications and types may lead to reduced lubrication efficiency and a lower freezing point of the oil, making it more prone to freezing. Once the oil freezes in winter, it can cause the engine block to crack, resulting in severe issues. More information about automotive engine oil is as follows: 1. The oil used in motor vehicles is engine lubricant, which serves to lubricate, form protective films, and assist in cooling the engine. 2. Engine oil is often referred to as the 'blood' of a car, as its quality directly impacts the engine's power and performance. It is advisable to avoid mixing different types of oils and instead use a single specification for top-ups. Frequent mixing of oils may negatively affect the engine.

2

3

Share

How to Place Temporary License Plates on Cars?

For passenger vehicles that have not yet been registered (distinguished from cargo vehicles, including sedans, etc.), which need to temporarily drive on the road, two temporary license plates should be affixed simultaneously: one should be placed on the lower left or right corner of the front windshield inside the vehicle in a position that does not obstruct the driver's view, and the other should be placed on the upper left corner of the rear windshield inside the vehicle. More details are as follows: 1. Although the temporary license plate is just a piece of paper, there are clear regulations for new cars on the road. The temporary license plate must be placed in a conspicuous position on the front windshield of the car to ensure that road surveillance can clearly monitor vehicles with temporary plates. 2. For vehicle owners who do not correctly affix temporary license plates, they will be penalized with a full deduction of 12 points and a fine of 200 yuan.

19

3

Share

What do the dry boiling point and wet boiling point of brake fluid mean?

Brake fluid dry boiling point refers to the boiling point of new brake fluid, while the wet boiling point refers to the boiling point of brake fluid after two years of use with 3.5% water content. The following is relevant information about brake fluid: 1. Motor vehicle brake fluid is mainly DOT brake fluid: DOT brake fluid has good temperature adaptability, is not sensitive to changes in ambient temperature, and is compatible with water, so that when a small amount of water or water vapor enters the brake system, the brake system will not be seriously affected; 2. When disc brakes are applied: The calipers generate a large amount of heat by friction with the disc, and the higher the boiling point of the brake fluid, the more stable the brake system will be.

1

4

Share

Why is the reversing radar not beeping?

What Causes Oil Leakage in the Haval H6 Shock Absorber?

What is the purpose of the 0.0 on Volkswagen's dashboard?

How to Deal with Paint Spots on the Car?

Does Mixing Engine Oils Affect the Car?

How to Place Temporary License Plates on Cars?

What do the dry boiling point and wet boiling point of brake fluid mean?

What is the engine code for the Civic 1.5T?

How to remove ETC from the windshield?

What is the displacement of the Panamera?

What does it mean when the power of Haval H6 is set to the ON position?