Why is the reversing camera not displaying in a Volkswagen car?
3 Answers
The reasons why the reversing camera is not displaying in a Volkswagen car are: 1. The camera is damaged; 2. Poor contact of the display screen wiring. The solutions are: 1. Check if the camera is damaged, and if so, repair or replace the camera; 2. Check if the control wires of the display screen are loose, and if so, reconnect and secure them properly. If the wiring is fine, take the car to a 4S shop to inspect the display screen. Taking the Volkswagen Bora 2020 1.5L Manual Fashion model as an example, this car is a compact vehicle with a 1.5L inline four-cylinder engine, naturally aspirated intake, maximum horsepower of 113ps, maximum torque of 145nm, a 5-speed manual transmission, and a 4-door 5-seater sedan body type.
I also encountered the sudden blackout of the reversing camera when driving a Volkswagen before, which was really frustrating. The most common cause is the camera itself being dirty or damaged, such as being covered in mud or suffering internal circuit short circuits due to impact, leading to no signal display. It's also necessary to check if the wiring harness connection in the trunk area is loose, as it's prone to being pressed by debris. A blown fuse is another issue, usually found in the fuse box, and replacing it with a new one should solve the problem. If it's a software glitch, just like a mobile app crashing, restarting the vehicle can sometimes restore functionality. Don’t forget to check the screen settings, as someone might have accidentally switched to another mode. Without the reversing camera, it’s easy to scratch the rear of the car while driving, so I suggest not delaying and heading to the repair shop as soon as possible—safety first. Usually, try to avoid parking in dusty areas and regularly clean around the camera to prevent issues beforehand.
As someone who often tinkers with cars, I've dealt with disappearing reverse cameras. First, check if the camera lens is clean—wipe off any dust. Then inspect the wiring harness connection on the left side of the trunk for looseness. Next is the fuse—locate the 'reverse camera' labeled one in the dashboard fuse box and replace it, an easy fix with basic tools. For intermittent signals indicating a short circuit, it's likely due to crushed/damaged wiring—replace with new wires. Software issues require OBD device diagnostics; Volkswagen models often have software bugs solvable through system updates. Keeping a spare camera in the car helps during emergencies. Remember, when the reverse camera fails, use manual rearview mirrors instead for safer reversing. Learning basic electrical knowledge through DIY saves repair costs long-term.
