···
Log in / Register

Why is the red light on when charging the Wuling Mini?

3 Answers
DiCamilla
07/29/25 5:25pm
The reason why the red light is on when charging the Wuling Mini: The converter of the charger is damaged and cannot convert and charge, replace the charger resistor. Charging precautions are as follows: Suitable charging locations: It is best to charge the battery in a cool, ventilated, and dry place. Direct sunlight or rain will have a bad effect on the performance of the battery and charger. Keep the battery and charger away from other heat sources when charging. Full charge status: The battery should be fully charged in time after use, and the charger will show a green light when fully charged. Long-term storage with insufficient charge or using the battery before it is fully charged will affect the battery's performance. Using the battery 3 hours after the charger shows a green light is especially effective.
Was this review help?
7
3
Share
VonAthena
08/14/25 8:20am
I noticed that the Wuling MINI's red light is on during charging, which could be part of the normal charging process, but sometimes it signals an issue that triggers an alarm. Based on my years of experience driving electric vehicles, a red light usually indicates active charging, which is quite common since the charging system needs to display its status. However, if the red light stays on continuously or flashes incessantly, it might be due to an unstable plug connection, voltage fluctuations, or an internal fault in the charger. I recommend first unplugging and reinserting the charging cable—many minor issues can be resolved this way. If the light persists, check for aging or damaged charging cables, dust buildup in the charging port, and clean or switch outlets if necessary. Long-term neglect could lead to battery overheating and damage, so I’ve developed a habit of inspecting charging equipment monthly to ensure original accessories are safe and reliable. Charging environment is also crucial—avoid charging in high temperatures or exposing it to rain. If unsure, record a video and consult a professional technician to avoid compromising driving safety.
Was this review help?
8
3
Share
Expand All
SanLaila
10/13/25 6:54am
Last time I charged my Wuling MINI, I also encountered the issue of the red light turning on. At first, I thought it was a major malfunction. Actually, most of the time, it's just operating normally—the red light indicates the car is absorbing power, and the display can also be affected by the temperature or mode you've set. However, if it flashes too quickly or doesn't turn off, it might be due to a loose charger or poor contact at the socket. I tried unplugging and reconnecting, and it worked fine, saving me a lot of trouble. I recommend paying attention to the battery status during daily use—the red light is more likely to turn on when charging in low temperatures, so remember to park in a ventilated spot like an underground garage. Beginners often mistake the red light for a malfunction, but there's no need to panic. Here's a handy tip: regularly clean the charging port to avoid dirt buildup, which can prevent 90% of issues. For safety, if the red light is accompanied by unusual noises or overheating, cut the power immediately and inspect to prevent accidents. In short, be flexible—most charging issues can be fixed with minor adjustments.
Was this review help?
4
4
Share
Expand All
More Forum Discussions

How to Deal with the Continuously Illuminated Tire Pressure Monitoring Light on Lavida?

Turn on the ignition switch, press and hold the SET button of the tire inflation pressure control system until the dashboard indicator light comes on. Wait for the system to confirm the storage of new parameters, and the tire pressure monitoring light will automatically turn off, completing the reset. Below are the specific methods to eliminate the tire pressure monitoring light: 1. First, turn off the engine, then turn on the power for vehicle self-inspection. Press and hold the tire pressure monitoring button on the right front side of the gear shift lever for about three seconds until you hear a "ding" sound. Release the button to eliminate the tire pressure warning light on the dashboard. 2. If the light cannot be eliminated, visit a Volkswagen after-sales service center. Have the staff check the tire pressure and related systems such as sensors. After confirming there are no faults, use a specialized decoder to clear the tire pressure warning light on the vehicle.
18
2
Share

What does the engine fault light EDC mean?

EDC fault light indicates that there is a problem with the engine electronic control system, reminding the owner to go to the repair shop for inspection and maintenance as soon as possible. Here is some information about EDC: 1. The full name of EDC is Electric-Diesel-Control, which means electronic control system for diesel injection; its task is to electronically control the fuel injection system to achieve real-time control of fuel injection quantity and timing according to operating conditions. 2. When EDC appears on the car dashboard, it indicates an engine fault. When the EDC fault light comes on, it means there is a problem with the engine.
7
0
Share

What is the principle of car tire pressure monitoring?

Car tire pressure monitoring principle depends on the type of monitoring device, specifically introduced as follows: 1. Direct tire pressure monitoring: Uses pressure sensors installed inside the tires to measure air pressure, and wireless transmitters to send pressure information from inside the tire to a central receiver module. 2. Indirect tire pressure monitoring: When tire pressure decreases, the vehicle's weight causes that wheel's rolling radius to become smaller. By comparing rotational speed differences between tires, it achieves the purpose of monitoring tire pressure. 3. Functions of tire pressure monitoring: Prevent accidents; Extend tire service life.
9
1
Share

What to Do When the Car Key Won't Come Out?

When a car key won't come out, it's not necessarily a malfunction. There are two common scenarios: first, the key won't come out after turning off the engine; second, the key can't be turned after insertion. Here are the details: 1. Key won't come out after turning off the engine (common in automatic transmission models): In this case, the owner should check if there's any obstruction in the gear slot. Remove the obstruction, start the car, shift the gear again to ensure it's fully back in place, and then the key can be pulled out. 2. Key can't be turned after insertion: This is actually the car's automatic steering wheel lock function, a simple anti-theft feature. To resolve this, turn the key forcefully with your right hand while gently shaking the steering wheel left and right with your left hand, and the key will turn.
1
3
Share

What are the effects of overfilling engine oil?

The effects of overfilling engine oil are: 1. Intense agitation between engine components, leading to excessive engine load and power loss; 2. Oil splashing onto cylinder walls and entering the intake system through the crankcase ventilation system, causing oil burning issues. The method for changing engine oil is: 1. Lift the vehicle with a jack, locate and loosen the drain plug to drain the oil; 2. Remove the oil filter and place a container beneath it; 3. Install a new oil filter and add fresh oil. The functions of engine oil are: 1. Reduce friction and high temperatures; 2. Cool down the engine; 3. Clean and remove contaminants; 4. Dampen vibrations; 5. Prevent rust and corrosion.
2
3
Share

How to Replace the Spark Plugs of Chery Tiggo 3?

Chery Tiggo 3's spark plug replacement method is as follows: 1. Clean the dust around the engine cylinder wires to prevent dust from entering the engine during replacement; 2. Use a wrench to loosen the spark plugs in the engine, remove the old spark plugs, then install the new spark plugs and screw them back in. The Chery Tiggo 3 is a compact SUV with the following dimensions: length 4420mm, width 1760mm, height 1670mm, wheelbase 2510mm, fuel tank capacity 55 liters, and trunk capacity 550 liters. The Chery Tiggo 3 is equipped with a 1.5L naturally aspirated engine with a maximum horsepower of 116.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.