Why is the rear seat of Volkswagen raised?

1 Answers
Suzanne
07/29/25 9:55pm
The reason for the raised rear seat in Volkswagen cars is to ensure the flatness of the chassis. Here are the relevant details: 1. The chassis beneath the car accommodates the exhaust pipe or drive shaft. Typically, rear-wheel-drive vehicles require a drive shaft to transmit power from the engine to the rear wheels, necessitating this structural protrusion. 2. The car adopts a front-engine, rear-wheel-drive layout, requiring space in the middle for the drive shaft. The front-mounted engine transmits power to the rear wheels via the drive shaft. If the drive shaft is too low, it may easily scrape the ground, affecting the car's off-road capability. Raising the vehicle height would, in turn, impact the car's center of gravity. Therefore, a raised floor section is designed to protect the drive shaft and enhance the car's stability, off-road capability, and handling.
Was this review help?
9
5
Share
More Forum Discussions

Is the Haval H6 3rd Generation 2.0T Four-Wheel Drive or Two-Wheel Drive?

Haval H6 3rd Generation 2.0T is four-wheel drive. Part-Time 4WD: Part-Time 4WD (Part-Time-4WD) is a four-wheel drive system that allows the driver to choose between two-wheel drive and four-wheel drive. The driver can switch between two-wheel drive and four-wheel drive modes by engaging or disengaging the transfer case based on road conditions. This is a common four-wheel drive form used in many "hardcore" off-road vehicles. Full-Time 4WD: Full-Time 4WD, also known as All-Wheel Drive (AWD or 4WD), means that all wheels receive power in any driving condition. Compared to two-wheel drive and the aforementioned part-time and on-demand 4WD systems, full-time 4WD vehicles have better obstacle-crossing capabilities and faster response times. Therefore, full-time 4WD is widely used in military and racing applications.
1
4
Share

What is the small car produced by Mercedes-Benz called?

The smallest car produced by Mercedes-Benz is called the smart, which can only accommodate two people. This car has a very cute appearance and is often referred to as a "large toy car." At the same time, the design of this car maintains the elements of Mercedes-Benz while also making the car more lively and agile on the basis of retaining these elements. It not only satisfies visual enjoyment but also meets the daily needs of car owners. Interior: Although this car is small in size, considerable effort has been put into its interior, featuring unique and meticulous craftsmanship. First of all, let's talk about its seats, which are made of slightly hard materials but still offer full comfort when seated. The space is also very generous, with enough room for an adult male to sit without feeling cramped, and there is ample legroom near the chassis. Space: Its storage space is also very large, meeting the needs for commuting while providing ample space for placing items during shopping trips. Lastly, it's worth mentioning its steering wheel, which is designed to be small and cute, easy to handle, and fully functional.
4
3
Share

How to Activate One-Touch Window Lift in the Levin?

Levin activates the one-touch window lift method as follows: 1. The Levin's one-touch window lift is set using the button on the armrest. 2. For the one-touch window lift setting of the button, first start the vehicle. 3. Press the button down for 5 seconds, then lift the button for 5 seconds. Once the system records it, the activation is successful. The usage method of Levin's one-touch window lift is as follows: 1. Open the window: Press the button to the first position until the desired position is reached, then release. 2. Press the button harder to reach the second position, at which point the window will fully open. 3. Close the window: Lift the button to the first position, and the window will move to the desired position before releasing. 4. Briefly pull the switch to the second position to automatically close the window.
17
0
Share

Why can the Mistra start but not move?

If the car can start but not move, it may be due to a lack of automatic transmission fluid. Without transmission fluid, there is no oil to drive the torque converter, so the car naturally cannot move. Introduction to Automatic Transmission Fluid: Automatic transmission fluid, also known as ATF, can be used as power steering fluid but cannot be used as clutch fluid. Its function is to establish oil pressure through the oil pump to control the clutches and brakes, enabling the automatic transmission to output power as required. Additionally, automatic transmission fluid also serves lubrication and cooling purposes and can be used as power steering fluid in the car's power steering pump. Automatic Transmission: The internal structure of an automatic transmission is quite complex. For these tightly fitted parts to function properly, automatic transmission fluid plays the most crucial role. Therefore, during regular car maintenance, besides changing the engine oil, it is absolutely essential not to forget to change the automatic transmission fluid at fixed intervals.
3
4
Share

What to Do When the Car Stalls After Wading Through Water?

Do not attempt to restart the car immediately after it stalls due to wading through water. Instead, stop the car and check the cause of the stall. There are three possible reasons for a car stalling after wading through water: 1. The intake port has sucked in a large amount of water, causing the engine to stall: First, open the engine hood and check if the air filter is soaked. If it is, it indicates that water may have entered the engine cylinder. You can remove the spark plugs and try to start the engine to expel the water from the cylinder and exhaust pipe. After drying the spark plugs, reinstall them and start the car. 2. The exhaust pipe has backfilled with a large amount of water, causing the engine to stall: If the air filter is not soaked, it may be due to excessive water in the exhaust pipe. In this case, first check if there is water in the cylinder. If there is, drain it and then remove the remaining water from the exhaust pipe. 3. The ignition-related system has short-circuited, causing the engine to stall: In this situation, the car cannot be started and you will need to wait for rescue.
19
4
Share

Where is the engine model of Changan Automobile located?

The engine number of Changan Automobile is located under the co-driver's seat, where you can find the stamped engine number. The meaning represented by the engine number is as follows: 1. The first to third digits WDB indicate that this car is a German automobile, where W stands for Germany, and DB stands for Daimler-Benz. 2. The fourth digit represents the body series, i.e., the chassis series. 3. The fifth digit indicates the engine type. 4. The sixth to seventh digits represent the model within this body series. 5. The eighth digit is the occupant safety system number, with E indicating seat belts and front two airbags. 6. The ninth digit is the factory re-inspection coefficient. 7. The tenth digit is the vehicle year, using 21 letters from A-Z to represent 1980-2000, with N standing for 1992 and Y for 2000. 8. The eleventh digit indicates the vehicle assembly plant. The twelfth to seventeenth digits represent the chassis production serial number of this body series.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.