Why is the rear reading light of the Magotan always on?

1 Answers
Finley
07/29/25 11:17pm
The button to control the reading light is located near the sunroof. The functions and control methods of the reading light are as follows: Functions of the interior reading light: The interior reading light is the main lighting fixture in the car at night, and it also integrates the functions of controlling the sunshade and sunroof. The interior reading light is installed inside the car, with one above the driver's seat and another in the middle above the rear seats, making it convenient for reading inside the car. How to turn on the reading light: The control strategy for the reading light and door control light illumination is as follows: when all four doors are closed, the front and rear reading lights will turn on after the engine is turned off or power is cut. When all four doors are closed, opening any one door will cause the front and rear reading lights to turn on. When all four doors are closed and the engine is off, receiving an unlock command will also cause the front and rear reading lights to turn on.
Was this review help?
5
2
Share
More Forum Discussions

What Does Maximum Torque Mean for a Motorcycle?

Maximum torque refers to the maximum power output that an engine can produce. Below are specific details about torque: 1. Introduction: The torque of an engine refers to the rotational force output from the crankshaft. Under a fixed power condition, it has an inverse relationship with engine speed—the higher the speed, the lower the torque, and vice versa. This reflects the vehicle's load capacity within a certain range. 2. Representation: Torque is expressed in N·m/r/min. The maximum torque generally occurs within the engine's mid-to-low speed range. For most motorcycles, the maximum torque is achieved at mid-range speeds (around 5,000 to 6,000 RPM).
1
2
Share

Are new energy vehicles resistant to high temperatures in summer?

Summer brings high temperatures, but there is no problem for the battery safety of vehicles, so new energy vehicles are relatively resistant to high temperatures. Precautions are as follows: 1. Avoid charging: In the current high-temperature weather, electric vehicles should try not to charge for a long time under direct outdoor sunlight. First, it is better for the maintenance of electric vehicles, and second, it avoids the risk of battery damage or even spontaneous combustion. The battery is sensitive to temperature during use, and the current working temperature range of lithium batteries is -20°C to 60°C. 2. Risk of explosion: When the ambient temperature exceeds 60°, as the battery heats up during operation, lithium batteries have the risk of overheating, burning, and explosion. However, the probability of spontaneous combustion of electric vehicles is extremely small. If accidents occur, they are mainly caused by aging circuits or short circuits caused by water.
7
3
Share

Is Mazda a Joint Venture or Domestic Brand?

Mazda vehicles are joint venture models. Its lineup includes: Mazda6, Mazda3, Atenza, Mazda CX-5, Mazda CX-8, etc. Taking the Mazda3 as an example, its body dimensions are: length 4662mm, width 1797mm, height 1445mm, with a wheelbase of 2726mm and a fuel tank capacity of 50 liters. The Mazda3 is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 86kW at 6100rpm and maximum torque at 3500rpm, paired with a 6-speed manual transmission.
10
1
Share

What are the types of oil seals?

Oil seal is the customary term for general sealing components, simply put, it refers to the sealing of lubricating oil. It is a mechanical element used to seal grease (oil is the most common liquid substance in transmission systems, and also generally refers to liquid substances). It isolates the components requiring lubrication in transmission parts from the output components to prevent lubricating oil leakage. The sealing components used for static sealing and dynamic sealing (generally reciprocating motion) are called oil seals. Extended information: Oil seals are required wherever there is liquid lubricating oil inside a rotating body case that connects with the external environment. Some are made of rubber, some of metal, but most are steel-reinforced rubber, such as the rear crankshaft oil seal, front and rear transmission oil seals, left and right axle shaft oil seals, front main reducer oil seal, and rear air compressor oil seal.
10
3
Share

How to open the fuel tank cap of Maxus G10?

The method to open the fuel tank cap of Maxus G10 is very simple. Just press the fuel tank cap when the car is unlocked, and it will pop out automatically. More extended information is as follows: 1. When the car is unlocked: Press the fuel tank cap and it will automatically pop open. When the car is locked, the fuel tank cap will also be automatically locked, which greatly facilitates the operation of the car owner when refueling and also improves the safety factor of using the car to a certain extent. 2. Precautions: If the fuel tank cap is opened, pay attention to whether the vehicle is locked. If the car is locked, just unlock it. If the buckle of the fuel tank cap lacks lubrication, the fuel tank cap may also be difficult to open. In this case, lubricate it immediately to avoid delaying refueling. When refueling the vehicle, do not wait until the vehicle is completely out of fuel to refuel, as this will accelerate the wear of the vehicle's engine and is not conducive to the normal use of the vehicle.
15
5
Share

How Long Can the Car Air Conditioner Be Turned On?

It is advisable to keep it on for about 15 minutes. Prolonged use may lead to poor heat dissipation and damage to the car engine. Here are some relevant details: 1. Hazards: In relatively enclosed environments, such as garages, it may cause carbon dioxide poisoning. It is best to turn on the air conditioner in open or well-ventilated areas and leave a small window gap. When the car is parked, the engine operates at idle speed with low RPM, resulting in low intake pressure. In this case, the engine will increase the throttle opening, thereby increasing fuel injection. 2. Precautions for using the car air conditioner: Shortly after entering the car, you should open the windows or turn on the external circulation ventilation system to introduce fresh air. Do not drive for long periods with closed windows and doors, and never sleep or rest for extended periods in a sealed car.
3
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.