Why is the Q5L cigarette lighter not working?

1 Answers
DelMaverick
07/25/25 1:25pm
The reasons why the Q5L cigarette lighter is not working are as follows: 1. Due to long-term use, repeated insertion and removal may cause the spring clip to loosen, resulting in the cigarette lighter not receiving power. 2. Another possible reason is that repeated insertion and removal or improper use may cause a short circuit in the wiring, burning out the fuse. Below are the repair methods for a non-working cigarette lighter: 1. First, try connecting a cigarette lighter of the same model. If it works normally, the issue is with the lighter itself, and it can be directly replaced. 2. If it still doesn’t work, the problem is likely with the cigarette lighter’s fuse, which can be replaced by yourself as follows: (1) Locate the fuse box for the car’s electrical components. The position of the fuse box varies depending on the car’s brand and model—some are in the storage compartment, while others are under the dashboard. (2) Open the fuse box cover and refer to the fuse location diagram on the inside of the cover to find the cigarette lighter fuse. (3) Use the provided fuse puller to remove the blown fuse and replace it with a new or spare cigarette lighter fuse.
Was this review help?
3
0
Share
More Forum Discussions

How to Obtain the Annual Inspection Sticker for a 9-Year-Old Vehicle Exempt from Inspection?

That means for the 7th and 9th years when the vehicle is exempt from the inspection line, the annual inspection sticker does not need to be replaced either. This is because most annual inspection stickers are now electronic, unless you specifically need a paper sticker. You only need to log in to the Traffic Management 12123 APP and save the annual inspection sticker to your phone; there's no need to deliberately replace the sticker. Below is relevant information about how often the vehicle inspection sticker needs to be replaced: Motor vehicles should undergo safety technical inspections according to the following periods from the date of registration. 1. For passenger vehicles used for commercial operations: once a year within the first 5 years; once every 6 months after exceeding 5 years. 2. For cargo vehicles and large or medium-sized non-commercial passenger vehicles: once a year within the first 10 years; once every 6 months after exceeding 10 years. 3. For small and mini non-commercial passenger vehicles: once every 2 years within the first 6 years; once a year after exceeding 6 years; once every 6 months after exceeding 15 years. 4. For motorcycles: once every 2 years within the first 4 years; once a year after exceeding 4 years. 5. For tractors and other motor vehicles: once a year. 6. For school buses: once every 6 months. If a commercial motor vehicle passes the safety technical inspection within the prescribed inspection cycle, it does not need to undergo the safety technical inspection again.
4
1
Share

What kind of car is Benelli?

Here is an introduction to Benelli: 1. Overview of Benelli: Benelli is one of the oldest motorcycle manufacturers in Italy and the world. The company was founded in 1911 and has never stopped production, even during wars and economic depressions. It is also considered one of the youngest motorcycle manufacturers in the world. 2. Technical features: It uses high-capacity ion cells with high energy density, long lifespan, fast charging, and environmental safety. It features five intelligent protections including over-discharge protection, overcharge protection, temperature protection, short circuit protection, and overcurrent protection. The electronic control system, derived from Benelli's core Italian technology, employs more advanced and complex algorithms. It includes functions such as intelligent drive, stepless speed regulation, power-off braking, push assist, energy-saving shutdown, speed limit for safety, and under-voltage protection, ensuring comfortable and precise vehicle control.
20
1
Share

How to Maintain a 30cm Distance on the Right Side During Parallel Parking?

The method to maintain a 30cm distance on the right side during parallel parking is as follows: 1. Parallel parking at 30cm: Generally, before entering the parking space, keep a distance of about 30–50cm from the side (position the right 1/3 of the car's hood over the parking line to maintain a distance of about 30–50cm between the car body and the parking line.) 2. This distance is for observing the parking position through the right rear mirror: This distance allows for observing the parking position and determining a reasonable reversing distance into the space. If the distance to the right is too wide, it may affect the positioning points for entering the parking space and, when reversing straight and turning the wheel fully to the right, the left wheel might cross the left warning line.
5
2
Share

What is BYD's Lifetime Battery Replacement Policy?

BYD's lifetime battery replacement policy offers a lifetime warranty on the three key electric components for the first individual owner (non-commercial use). Here are some relevant details about BYD: 1. Powertrain: Equipped with BYD's self-developed BYD371QA eco-friendly engine, it achieves a fuel consumption of only 4.2 liters per 100 kilometers. This inline 3-cylinder double overhead camshaft engine, paired with Bosch's electronic fuel injection system, delivers a specific power output exceeding 50kW and a maximum torque of 90 N·m. All models come standard with a 5-speed manual transmission. 2. Features: The entire lineup is equipped with ESP electronic stability program, tire pressure monitoring, as well as advanced technologies like cruise control, auto hold, and battery preheating.
2
3
Share

Can body filler be applied directly to car paint?

It's best to let the newly painted car dry indoors for a period of time before driving it out. Generally, avoid contact with water for two days after painting in high temperatures. Relevant paint repair precautions are as follows: 1. Primer: The base must be completely dry before applying clear coat, otherwise the paint surface may lose gloss. 2. Color paint: Quick repairs must use single-component color paint. 3. Clear coat: The spraying pressure should not be too high (2-2.5KPa). Let each coat sit for 1-2 minutes, depending on the surrounding temperature during spraying - lower temperatures require longer sitting times, while higher temperatures require shorter times. The spraying thickness should be 1.5-2 cm and not too thick, otherwise it may not dry easily. After applying clear coat, let it sit for 5 minutes before baking. 4. Baking: The UV lamp should be 20-25 cm away from the part. Too far away will slow curing, while too close will cause fast curing but also fast shrinkage, leading to wrinkles and loss of gloss. For convex, concave, and curved parts, adjust the lamp angle according to the shape without missing any spots. If there's a power outage or the lamp is turned off during UV baking, don't turn it back on immediately - wait a few minutes for the lamp to cool down before restarting. UV rays can harm eyes, so wear specialized protective masks or glasses during operation.
7
3
Share

What brand of motorcycle is Kawasaki?

Kawasaki is a brand under Japan's Kawasaki Heavy Industries. Here is relevant information about Kawasaki: 1. Introduction: It is a Japanese heavy industry company. Kawasaki Heavy Industries originated during the Meiji Restoration era and primarily focuses on heavy industry. It has historical connections with JFE Steel (formerly Kawasaki Steel) and Kawasaki Kisen Kaisha (K Line). 2. Content: Mainly manufactures aerospace products, railway vehicles, construction heavy machinery, motorcycles, ships, and mechanical equipment. 3. Production Development: When the company was still named Kawasaki Shipyard, it began producing railway vehicles in 1906, including passenger cars and steam locomotives.
8
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.