Why is the parking air conditioning not cooling effectively?

1 Answers
DelElliott
07/29/25 10:09am
It may be due to insufficient refrigerant or a dirty condenser. Below is relevant information about vehicle air conditioning systems: 1. Introduction to vehicle air conditioning: The vehicle air conditioning system consists of a compressor, condenser, throttle element, evaporator, fan, and necessary control components, designed to regulate interior temperature and humidity, providing a comfortable environment for drivers. 2. Working principle: When the compressor operates, it draws in low-temperature, low-pressure gaseous refrigerant from the evaporator. After compression, the refrigerant's temperature and pressure increase, and it is sent to the condenser. Within the condenser, the high-temperature, high-pressure gaseous refrigerant transfers heat to the outside air passing through the condenser, causing it to liquefy into liquid form. When the liquid refrigerant flows through the throttle device, its temperature and pressure decrease before entering the evaporator. In the evaporator, the low-temperature, low-pressure liquid refrigerant absorbs heat from the interior air passing through the evaporator and evaporates into gas. This gas is then drawn into the compressor to begin the next cycle.
Was this review help?
5
4
Share
More Forum Discussions

What Causes a Clunking Sound When Shifting Gears in an Automatic Transmission?

Automatic transmission may produce a clunking sound when shifting gears due to issues such as generator gear problems, large cold engine valve clearance with poor lubrication, transmission failure, or shifting gears before the vehicle comes to a complete stop. Below is an introduction to the gears of an automatic transmission: 1. P (Park) Gear: This is the parking and starting gear. When engaged, the parking lock mechanism locks the transmission output shaft. 2. R (Reverse) Gear: This is the reverse gear. Engaging this gear connects the hydraulic system's reverse oil circuit, causing the drive wheels to rotate in reverse for backing up. Never force the gear into "R" when the vehicle is not completely stopped, as this may damage the transmission. 3. N (Neutral) Gear: This is the neutral gear. When engaged, the planetary gear system idles without power output. 4. D (Drive) Gear: This is the forward gear, also known as the driving gear. When the gear selector is in this position, the hydraulic control system automatically engages the appropriate forward gear based on throttle position and vehicle speed signals. It shifts up or down automatically as speed changes, enabling automatic transmission functionality. 5. S (Sport) Gear: This is the sport mode. When the gear selector is in this position, the transmission control module receives the driver's command, and the vehicle enters sport mode. The shifting logic becomes more aggressive, with more frequent gear changes, providing better control and throttle response for a more engaging driving experience.
20
2
Share

How Many Bottles of Antifreeze Are Needed to Replace It in a Car?

Replacing the antifreeze in a car requires about 5 bottles. Antifreeze prevents the coolant from freezing and cracking the radiator or damaging the engine cylinder block or head during cold winter parking. Before completely replacing the antifreeze, conduct a thorough inspection to check for any signs of leakage or cracks in the pipes, with a focus on the five-way hose. The five-way hose gets its name from having five connecting interfaces to various parts. Antifreeze flows through the five-way hose and is distributed to different parts of the car to function. If there is any antifreeze leakage in this section, replace the hose or resecure the interface as needed. Drain the old antifreeze, then flush the liquid channels with clean water. Add clean water to the antifreeze reservoir, then continuously inject water into the reservoir to allow it to flow through the engine cooling system. Start the car and let it idle for 3 to 5 minutes to circulate the water. The water initially draining from the reservoir will have a faint pink color. Continue adding clean water until the outflowing water is clear. Remember to remove the heater hose and drain the water from the heater core. About an hour after draining, add the new antifreeze through the radiator hose to allow it to flow quickly into the radiator. Then, add another bottle of antifreeze to the antifreeze reservoir until it is nearly full. Start the car and let it run for about 10 minutes. During this time, the coolant level will drop slightly as air is expelled from the cooling system. Add more antifreeze until it reaches the "MAXT" mark on the reservoir.
11
3
Share

How Many Years of Driving License Can Be Replaced with a Long-Term Driving License?

During the ten-year validity period of the motor vehicle driving license, if no more than 12 points are recorded in each scoring cycle, the driving license can be replaced with a long-term valid one. If the license expires within one year, it can be renewed normally; if it expires between one and three years, the license will be canceled, but it can be renewed by passing the subject one exam; if it expires for more than three years, the license will be invalid and cannot be renewed. Renewal Period: The motor vehicle driver should apply for renewal at the vehicle management office where the driving license was issued within 90 days before the expiration of the driving license. When applying, the "Motor Vehicle Driving License Application Form" should be filled out. Renewal and inspection must meet the following conditions: Holders of large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, or large truck driving licenses have no points recorded in the current scoring cycle, or holders of other permitted driving licenses have less than 12 points recorded in the current scoring cycle; Holders of large passenger vehicles, tractors, city buses, medium-sized passenger vehicles, or large truck driving licenses who have points recorded in a scoring cycle, as well as holders of other permitted driving licenses who have been involved in a traffic accident causing death and bear equal or greater responsibility but have not had their driving license revoked, have participated in the inspection education; The applicant has no pending road traffic safety violations or traffic accidents; The applicant's physical condition meets the driving permit requirements; The motor vehicle driving license is not seized, detained, temporarily suspended, revoked, canceled, or withdrawn by law. Renewal Materials: Bring two copies of ID card, two 1-inch color passport photos, original ID card, original driving license, and a medical examination certificate from a county-level or above hospital (free medical examination is also available at the vehicle management office).
17
0
Share

How Many Times Can You Take the Driving Test?

In the driving license examination, there is no limit to the number of times you can schedule the test for Subject 1 and Subject 4, and each test comes with two free retake opportunities. For Subject 2 and Subject 3, you can schedule the test up to 5 times, and each test also includes two free retake opportunities. Subject 1, also known as the theoretical driving test or driver theory test, allows you to take the test twice on the same day. If you fail the first attempt, you can take a free second retake. If you still fail the second attempt, the Subject 1 test is terminated, and you can only reschedule the test after 10 days. The test is scored out of 100, with a passing mark of 90, and is conducted via computer. Subject 2, commonly referred to as the 'small road test,' is the abbreviation for the field driving skills test. It mainly includes five items: reversing into a parking space, parallel parking, stopping and starting on a slope, turning at a right angle, and driving along a curve. The test is scored out of 100, with evaluation criteria for failing, deducting 20 points, deducting 10 points, or deducting 5 points. A score of 80 or above is required to pass. You can schedule Subject 2 up to five times, and each scheduled test comes with two attempts. If you fail all five tests, your previously passed scores will be invalidated, and you will need to re-register for the test. Subject 3, also known as the 'big road test,' is the road driving skills test. The test content includes: preparing to start, driving straight, changing lanes, passing through intersections, pulling over, crossing pedestrian crosswalks, passing through school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and driving at night. The test is scored out of 100, with a passing mark of 90 or above. You can schedule Subject 3 up to five times, and each scheduled test comes with two attempts. If you fail all five tests, your previously passed scores will be invalidated, and you will need to re-register for the test. Subject 4, also known as the theoretical driving test or driver theory test, mainly covers: safe and civilized driving operation requirements, safe driving knowledge under adverse weather and complex road conditions, emergency handling methods for situations like tire blowouts, and post-accident handling knowledge. The test is scored out of 100, with a passing mark of 90. There is no limit to the number of times you can take Subject 4 within the validity period of your driving test certificate.
14
1
Share

Where is the Great Wall Cannon diesel filter located?

The Great Wall Cannon oil filter is located at the top front of the engine and below the engine, which is the common position for most vehicles' oil filters. Here is some information about oil filters: 1. Diesel filter: The diesel filter is one of the key components ensuring the fuel quality for diesel engines. 2. Types: Diesel filters mainly come in two types: spin-on and replaceable. 3. Function: High-quality diesel filters can effectively block micro-dust and moisture carried in diesel, significantly extending the service life of fuel injection pumps, diesel nozzles, and other filter components.
1
1
Share

Should Brake Fluid Be Replaced?

Brake fluid needs to be replaced, and the relevant explanations are as follows: Reasons: Because when the car brakes, water molecules will be generated under the action of high temperature. In addition, brake fluid is a high-concentration liquid and has a strong adsorption capacity for water. Therefore, the water content of the brake fluid will inevitably increase over time, thereby affecting the braking effect of the car. Additional note: Regular replacement of brake fluid is very important. Generally, it should be replaced every 2 years or every 40,000 kilometers. The most direct method is usually to check the water content of the brake fluid. If it exceeds 3%, it needs to be replaced.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.