Why is the paint still soft after one month?

2 Answers
OAnderson
08/29/25 3:36am
Paint remaining soft after one month is due to incorrect proportions of drying agents, causing the underlying paint layer to not dry properly. Things to note after painting: Avoid using any water other than soft water for washing, including hot water, alkaline water, and high-hardness water, as these can damage the paint. If hard water is used to wash the vehicle, it may leave marks on the paint surface after drying. Reduce the frequency of car washing: Do not wash the car immediately after the engine cools down, as this can also affect the car's paint surface and accelerate its aging. Avoid using high-pressure water streams to rinse the car body: If there is stubborn dirt on the car, first soak it with water and then rinse it off. Pay attention to the water flow method—use a dispersed water stream for washing, as high water pressure can also damage the car's paint surface.
Was this review help?
14
4
Share
StMaria
09/10/25 8:16am
I remember the paint still being soft a month after application, mainly due to poor environmental conditions. If the weather is too humid or the temperature is too low, the drying time of the paint can be significantly prolonged. Regular automotive paint typically requires certain temperature and dry conditions to harden. Painting in high-temperature seasons dries quickly, but painting in autumn, winter, or rainy days can easily lead to this issue. I recommend parking the car in a well-ventilated and dry place. If the paint remains soft and sticky after an extended waiting period, you might consider using a heat gun to assist in drying for a short while, but avoid excessive heat to prevent damaging the paint surface. It's best to check the weather forecast before the next paint job and choose a sunny day for the task, which will reduce trouble and ensure the longevity of the car paint.
Was this review help?
18
1
Share
Expand All
More Forum Discussions

Can Engine Cleaner Remove Carbon Deposits?

Engine cleaner can only remove surface carbon deposits and cannot achieve complete cleaning. Below is relevant information about engine cleaners: 1. Definition: Engine carbon deposit cleaner is formulated with high-efficiency surfactants, detergents, corrosion inhibitors, and other additives. It appears as a colorless transparent liquid and is diluted with water at a concentration of 3-6% during use. 2. Scope of Application: Suitable for degreasing and cleaning automotive components, leaving them bright and new while maintaining the original luster of metal materials. 3. Advantages: The cleaner has the ability to remove engine carbon deposits, replacing gasoline, kerosene, and organic solvents for engine cleaning. It saves petroleum resources and eliminates the health hazards posed by the toxicity of organic solvents.
13
4
Share

Can You Make a U-Turn on a Single Solid Line?

Making a U-turn on a single solid line is not allowed and is considered a traffic violation. Regardless of whether it's a single or double solid line, according to Article 90 of the Road Traffic Safety Law, violators who breach prohibited markings will be fined 200 yuan and receive a 3-point penalty. Generally, on long roads, white solid lines appear in the middle section or before intersections. If the line is a yellow dashed line or white dashed line, U-turns are permitted. However, U-turns are strictly prohibited on any solid line. Permissible U-turn situations: U-turn allowed at intersections with U-turn signs: If there is a clear U-turn sign at an intersection, U-turns are permitted. If there is a U-turn traffic light, follow its instructions. In the absence of a traffic light, U-turns can be made as long as they do not obstruct other vehicles or pedestrians. U-turn allowed at intersections without explicit 'No U-turn' or 'No Left Turn' signs: If there are no signs explicitly prohibiting U-turns, they are allowed. 'No explicit prohibition' means the absence of 'No U-turn' or 'No Left Turn' signs and no solid lines in the center of the road. U-turns permitted on yellow grid lines: Yellow grid lines are no-parking zones, typically placed at intersections prone to congestion due to temporary stops, important facility entrances, or other necessary locations. Parking (including waiting at traffic lights) on these lines is a violation. Although stopping is prohibited, U-turns are allowed on yellow grid lines unless there is a central barrier. U-turn allowed with a U-turn traffic light: If a U-turn traffic light is present, follow its signal—green means U-turns are permitted. When 'No Left Turn' and 'U-turn Allowed' signs coexist: U-turns are allowed, but left turns are prohibited. Note that 'No U-turn' is not the same as 'No Left Turn.' Important considerations when making a U-turn: Observe road markings—U-turns are never allowed on solid lines under any circumstances. Continue driving until a suitable U-turn location is found. If there is a 'No Left Turn' sign, U-turns are also prohibited at that intersection, even if 'No U-turn' is not explicitly stated, as U-turns inherently involve a left turn. U-turns must be made from the innermost left-turn lane. U-turns are not allowed from the second left-turn lane. Always yield to oncoming traffic when making a U-turn. Proceed only if it does not interfere with straight-moving vehicles; otherwise, you will bear full responsibility for any accidents. Near intersection stop lines, lanes often have guiding arrows. Not all leftmost lanes have left-turn arrows—some may have straight arrows. Even without explicit 'No U-turn' signs, U-turns are prohibited in such lanes. U-turns are not permitted on pedestrian crosswalks and are considered violations.
20
5
Share

What are the reasons for fast consumption of urea?

There are several main reasons for the fast consumption of urea: Nozzle issues: Problems with the urea nozzle, such as clogging, poor atomization, or direct leakage in the urea pipeline; Sensor malfunction: The exhaust temperature sensor sends a signal to the computer board at 180 degrees, prompting the nozzle to start spraying urea. If the exhaust temperature sensor malfunctions, the urea may start spraying before reaching 180 degrees, leading to excessive urea consumption; Urea pump problems: Internal failures in the urea pump can cause pressure build-up failure, or in the case of air-assisted urea pumps, it can more easily result in excessive urea consumption.
5
2
Share

What does 'service' mean when it appears on a car?

When 'service' appears on a car, it means 'maintenance', indicating that it's time for the vehicle owner to perform maintenance on their car. Below is relevant information about car maintenance: 1. First maintenance instructions: Generally, the most suitable time for a car's first maintenance is between 4,000 to 5,000 kilometers of driving, but the car should not be used for more than half a year. If the time exceeds this, the 4S dealership will not perform the first maintenance. 2. Purpose of maintenance: Maintenance items and cycles are usually determined based on the mileage driven, with the goal of achieving the best performance and extending the car's lifespan through regular maintenance. 3. Maintenance items: Different manufacturers and different car models may have varying maintenance items and cycles. It is essential to refer to the accompanying maintenance schedule for proper care and maintenance of your beloved car.
19
3
Share

How to Reset the Maintenance Light on Great Wall Fengjun 5?

Great Wall Fengjun 5 maintenance light reset method is as follows: Turn off the car's engine. After the engine is off, hold down the reset button, insert the key, and start the engine. After the vehicle starts, release the reset button and briefly press the clock adjustment button once. At this time, the maintenance cycle light will display in reset mode. After several seconds, it will return to the normal view, and the maintenance light reset is completed. Features of the Great Wall Fengjun 5 model: The interior color scheme has changed from gray to a black and gray dual-tone combination, with the center console panel and air vent trim painted silver. Additionally, the seats have undergone process improvements, and new seat fabrics have been selected to enhance comfort. In terms of power, it still comes equipped with a 2.0T diesel engine, 2.5T diesel engine, 2.8T diesel engine, and 2.2L and 2.4L gasoline engines, paired with a 5-speed manual transmission.
2
3
Share

Is the Rearview Mirror Heating Automatic?

If it's a BMW 3 Series, then the heating is automatic; other vehicles require manual activation. Rearview Mirror Heating Function: The rearview mirror heating function refers to the ability of the rearview mirror to be heated via electric heating wires embedded behind the mirror surface during rainy, snowy, or foggy weather conditions, ensuring a clear mirror surface. Principle of Electrically Heated Rearview Mirrors: An electric heating element (heating film) is installed inside the mirror panels of both side rearview mirrors. During rainy or snowy weather, when the driver activates the rearview mirror heating function, the heating element quickly warms up to a set temperature within a few minutes, typically between 35-60 degrees Celsius, thereby heating the mirror surface to remove fog and frost.
6
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.