Why is the new battery not fully charged after 10 hours?

1 Answers
DiMaddox
07/29/25 11:18pm
Because the first charging time for a car battery is 12-14 hours. The charging duration hasn't reached the required time yet. Here's some information about battery charging: 1. Initial charging: The battery pack retains some residual power before leaving the factory, allowing for short-distance riding after the electric vehicle is sold. After the first ride, the battery must undergo its initial charging, which is recommended to last slightly longer (8-12 hours). 2. Precautions: To ensure the charging safety of the battery pack and guarantee its service life, only the dedicated charger provided by the automobile company should be used for the battery pack.
Was this review help?
1
5
Share
More Forum Discussions

Unable to Connect to Car Bluetooth?

Reasons why the car Bluetooth cannot connect to the phone: 1. The mobile device is out of the communication range of the car Bluetooth, and the distance is too far to receive the signal. 2. There are instability factors in electronic devices. 3. The phone Bluetooth has connection records with other devices. 4. The car Bluetooth module has a problem, or the phone's Bluetooth function is faulty. Car Bluetooth is an in-car wireless hands-free system designed and developed based on wireless Bluetooth technology, which is an extension of mobile phone Bluetooth technology. Its main function is to connect with the phone via Bluetooth technology for hands-free calls during normal driving, aiming to free hands and reduce the risk of traffic accidents.
10
3
Share

What Causes a Motorcycle to Run Out of Fuel and Stall Frequently?

The reasons for a motorcycle running out of fuel include issues with the fuel supply system, ignition system, engine faults, and a dirty fuel tank switch. Fuel Supply System Fault: Clogged fuel lines or poor fuel supply from the carburetor can cause the motorcycle to stall frequently while riding and run out of fuel. Ignition System Fault: Short circuits in the trigger coil, slight damage to the ignition unit, or leakage in the high-voltage coil can also lead to this issue. Engine Fault: Too small valve clearance, worn valves, or insufficient engine lubrication can also cause the motorcycle to experience this problem. Dirty Fuel Tank Switch: The small hole in the fuel tank switch may be clogged, preventing fuel from flowing. You can use carburetor cleaner to spray it.
10
4
Share

What is the black line on the left rearview mirror of an Audi car?

The black line on the left rearview mirror of an Audi is actually a dual-curvature mirror, which helps reduce blind spots and improve driving safety. Below is an explanation of the specific functions and technical principles of dual-curvature mirrors: Functions of dual-curvature mirrors: They provide a wider field of view, which is particularly useful during high-speed driving, allowing for better observation of the vehicle's surroundings. At lower speeds, they make it easier to judge the vehicle's position. The combination of these features reduces rear blind spots. This is because the mirror uses a dual-curvature lens, meaning one lens with two curvatures. The inner two-thirds of the mirror uses a flat surface, while the outer one-third uses a convex surface, separated by the black line to help the driver see behind more clearly. The convex portion is used to observe areas farther to the side of the vehicle, reducing blind spots and doubling the field of view during turns, almost completely eliminating blind spots. Technical principles of dual-curvature mirrors: Based on three factors—vehicle model, the driver's eye position relative to the mirror, and visibility requirements—optical principles and data methods are applied to select different curvature radii for various viewing angles around the vehicle, with smooth transitions between them. This approach expands the field of view and reduces blind spots while maintaining minimal distortion, meeting national mandatory standards and addressing blind spot issues. Additionally, the mirror design uses a dividing line to alert the driver that the curved portion is only for observing the general situation behind the vehicle.
2
3
Share

How to Use the Nissan Sylphy Dash Cam?

When the DVR is in standby or recording mode, briefly press the power button to enable or disable the screen protection function. Set the "Motion Detection" option in the system menu to "On" to activate the motion detection function. When the device is powered on, press the right button to enable or disable the infrared light for the rear camera. After powering on, press the menu button to enter the settings menu, press the down button to select the "Date Setting" option, press the OK button to enter the sub-menu, and use the mode button to make adjustments.
6
0
Share

What can be used to remove car body scratches?

Here are methods to remove car body scratches: 1. Toothpaste repair: For minor scratches on the car paint, you can use toothpaste for repair by applying it to the affected area. 2. Touch-up pen repair: For larger scratches, a touch-up pen can be used for repair. Below are car maintenance measures: 1. Minimize sun exposure by parking in shaded spots or under trees to avoid direct sunlight. 2. In rainy southern cities, wash the car frequently. Rainwater is often acidic, which can corrode the paint, and water stains and dirt can accumulate after rain, leading to water spots or even rust over time, significantly shortening the paint's lifespan. Therefore, frequent washing is essential, about once a week during the rainy season. 3. Purchase a suitable car cover for your vehicle model. Covering the car when it's parked for extended periods or not in use can effectively shield it from pollutants like rain, snow, dust, bird droppings, and haze, better protecting the paint.
6
3
Share

What is the fuel consumption per 100 kilometers for the Range Rover Vogue?

The fuel consumption of different Land Rover Range Rover models varies. According to official data from the Ministry of Industry and Information Technology, the 5.0-liter Range Rover consumes 12.7 liters per 100 kilometers, while the 3.0-liter Range Rover consumes 10.7 liters per 100 kilometers. Low-power 3.0-liter supercharged engine: The low-power 3.0-liter supercharged engine has a maximum power of 250 kW, a maximum torque of 450 Nm, a maximum power speed of 6,500 rpm, and a maximum torque speed of 3,500 to 5,000 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. High-power 3.0-liter supercharged engine: The high-power 3.0-liter supercharged engine has a maximum power of 280 kW, a maximum torque of 450 Nm, and a maximum power speed of 6,500 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. Low-power 5.0-liter supercharged engine: The low-power 5.0-liter supercharged engine has a maximum power of 386 kW and a maximum torque of 625 Nm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. High-power 5.0-liter supercharged engine: The high-power 5.0-liter supercharged engine has a maximum power of 415 kW, a maximum torque of 700 Nm, a maximum power speed of 6,000 to 6,500 rpm, and a maximum torque speed of 3,500 to 5,000 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.