···
Log in / Register

Why is the MG 5 so fuel-consuming?

3 Answers
LeSteven
09/07/25 6:36am
The reasons for the high fuel consumption of the MG 5 are as follows: Affected by temperature: Temperature fluctuations can cause variations in fuel consumption. In winter, lower temperatures generally lead to increased fuel consumption. Vehicle not serviced for a long time: Dirty engine oil and air filters can also result in higher fuel consumption. Contaminated oil leads to poor lubrication, increasing resistance in the engine's moving parts, which requires more energy to overcome, thereby raising fuel consumption. Excessive carbon buildup in the vehicle: Carbon deposits commonly accumulate in the throttle body, fuel injectors, intake manifold, and piston tops. Excessive carbon buildup in any of these areas can cause incomplete combustion, leading to increased fuel consumption.
Was this review help?
20
1
Share
AndrewLynn
09/19/25 5:48am
As an owner who drives the MG5 daily, I think its high fuel consumption might be related to my driving habits. I'm impatient and always love to stomp on the accelerator to overtake, which causes the engine's fuel consumption to skyrocket, especially in city traffic with frequent stops and starts—the fuel gauge just drops rapidly. The MG5's engine tuning is quite sporty, responsive but particularly fuel-hungry at low RPMs. I have a monitoring app installed in my car and found that fuel consumption can double during hard acceleration. Running the air conditioning frequently adds extra load, and a fully packed trunk increases resistance due to the added weight. To mitigate this, maintaining a steady speed of around 80 km/h on highways is the most fuel-efficient. I've also learned to control my foot and press the accelerator more gently, using the S mode less often. Regularly checking tire pressure and engine oil is also crucial. My experience shows that developing a smoother driving habit can help reduce fuel consumption somewhat.
Was this review help?
1
5
Share
Expand All
Avery
11/02/25 6:09am
From the car itself, the fuel consumption factors of the MG5 lie in its design. Its sporty styling results in high aerodynamic drag, leading to significant wind noise and increased fuel consumption at high speeds. The 1.5T engine is aggressively tuned for power, but its efficiency drops in traffic or at low speeds, naturally resulting in poor fuel economy. The transmission in my car shifts slowly, often keeping the RPMs high, which consumes more fuel. The car is not lightweight, and choosing wider tires increases rolling resistance, further adding to fuel consumption. I believe the manufacturer prioritized driving pleasure over fuel efficiency—while this was acceptable when the car was new, system degradation becomes noticeable after a few years. To improve, I opt for Eco mode in the city and use cruise control on highways to optimize resistance. I also keep the car light by avoiding unnecessary cargo. During maintenance, I ensure high-quality oil changes and clean air filters, as these factors should not be overlooked.
Was this review help?
11
4
Share
Expand All
More Forum Discussions

What brand of transmission does Toyota use?

Toyota uses Aisin transmissions. The transmission is a mechanism used to change the speed and torque from the engine, capable of fixed or stepped changes in the transmission ratio between the output and input shafts. Toyota's vehicle models include the Highlander, Vellfire, Corolla, Avalon, and Prado. Taking the 2018 Highlander as an example, its body dimensions are: length 4890mm, width 1925mm, height 1720mm, with a wheelbase of 2790mm. The 2018 Highlander is equipped with a 2.0T turbocharged engine, with a maximum power of 162kW and a maximum power speed range of 5200 to 5600 rpm, delivering a maximum torque of 350Nm.
18
3
Share

How Long Is the Validity Period of Subject 1?

Three years. Below are the regulations from the "Regulations on the Application and Use of Motor Vehicle Driving Licenses": 1. For first-time applicants for a motor vehicle driving license or those applying to add a permitted driving category, the vehicle management office shall issue a driving skills examination permit within one day after passing the Subject 1 exam. 2. The driving skills examination permit is valid for three years, and the applicant must complete the Subject 2 and Subject 3 exams within the validity period. If the exams are not completed within the validity period, the passed exam results will be invalidated. Below are the precautions for the Subject 1 exam: 1. Follow the arrangements of the staff and collect your driving training file in order at the waiting area. 2. Carry and present your ID card for inspection by the supervising officer. 3. Mobile phones must be turned off when entering the exam area. 4. No loud noises are allowed in the exam area. 5. Law textbooks are not allowed in the exam area (or should be placed in a bag). 6. After the exam, keep your ID card safe and submit the file to the "Submission Window" at the front of the exam area. 7. Candidates who pass the exam should sign under the guidance of the staff at the exit before leaving. 8. Candidates who fail the exam can leave immediately and wait for notification from their driving school regarding the retake schedule. 9. There is no limit to the number of times you can schedule the Subject 1 exam.
19
1
Share

How often should the brake pads of an Audi Q5 be replaced?

Audi Q5 brake pads should be replaced every 60,000 kilometers. Brake pads generally consist of two parts: an iron backing plate and friction material. It is important not to wait until the friction material is completely worn out before replacing the pads. Typically, the thickness of new front brake pads is 14 millimeters, while the replacement limit thickness is 7 millimeters, which includes over 3 millimeters of iron backing plate thickness and nearly 4 millimeters of friction material thickness. Below is more information about automotive brake pads: 1. Automotive brake pads, also known as brake linings, refer to the friction materials fixed on the brake drum or disc that rotates with the wheel. The friction linings and blocks bear external pressure to generate friction, thereby achieving the purpose of vehicle deceleration. Automotive brake pads are generally composed of steel plates, adhesive heat insulation layers, and friction blocks. The steel plates are coated to prevent rust, and the coating process is monitored using an SMT-4 oven temperature tracker to ensure the temperature distribution during coating meets quality standards. 2. The working principle of brakes mainly relies on friction. By utilizing the friction between the brake pads and the brake disc (or drum), as well as between the tires and the ground, the kinetic energy of the moving vehicle is converted into heat energy through friction, bringing the vehicle to a stop. A good and efficient braking system must provide stable, sufficient, and controllable braking force, along with excellent hydraulic transmission and heat dissipation capabilities, to ensure that the force applied by the driver on the brake pedal is effectively transmitted to the master cylinder and sub-cylinders, while avoiding hydraulic failure and brake fade caused by excessive heat. The braking systems on vehicles are divided into two main categories: disc brakes and drum brakes, with the efficiency of drum brakes being far inferior to that of disc brakes.
3
5
Share

How to Use the In-Car Navigation System in the New Sylphy?

The method to use the in-car navigation system in the New Sylphy is: regularly upgrade the system, and after upgrading, directly enter the navigation interface. Taking the Sylphy 2021 model as an example, its body dimensions are: length 4631mm, width 1760mm, height 1503mm, wheelbase 2700mm, ground clearance 166mm, fuel tank capacity 50L, and trunk capacity 510L. The Sylphy 2021 model is equipped with a 1.6L naturally aspirated engine, with a maximum power of 90kW and a maximum torque of 155Nm, paired with a 5-speed manual transmission. Its front suspension uses a MacPherson independent suspension, and the rear suspension uses a torsion beam non-independent suspension.
15
1
Share

What is the purpose of the Magotan REST function?

REST function utilizes residual heat for heating. After the vehicle is turned off in winter, the air conditioning can still operate normally by utilizing the thermal energy from the radiator, which is generated during engine operation, following the same principle as when the car is running. Below are detailed explanations about the REST button: 1. The REST button is located on the left side of the central control panel's middle knob, with SYNC on the right side. Pressing SYNC once turns on the light, synchronizing the dual-zone air conditioning for the front seats; otherwise, the driver and passenger's separate air conditioning zones can be adjusted independently without interference. 2. When parking and wanting to turn off the air conditioning, pressing REST will not turn it off. There are two methods to turn off the air conditioning: one is to adjust the air volume switch to 0. The other is to press the "MENU" button and then press OFF on the central control screen to turn off the air conditioning.
18
3
Share

Can Out-of-Town National V Vehicles Be Transferred to Beijing License Plates?

National V emission standard vehicles can be transferred to Beijing, provided they are National V Phase II vehicles within three years. The "Beijing Local Emission Standard for Motor Vehicles in the Fifth Stage" stipulates that the fifth-stage emission standard has been implemented since February 1, 2013, and the acceptance of light gasoline vehicle models from automobile companies that meet the fourth-stage standard has been discontinued. Conditions for transferring out-of-province vehicles to Beijing: 1. Obtaining a lottery indicator in Beijing; 2. The vehicle's environmental emission standard is National V. Documents required for transfer registration application: (1) Identity proof of the current vehicle owner; (2) If handled by an agent, the agent's identity proof (if the agent is a unit, the handler's identity proof is also required), along with a written authorization from the vehicle owner; (3) Vehicle registration certificate; (4) Vehicle driving license; (5) Vehicle license plate; (6) Proof of origin for the vehicle ownership transfer; (7) For customs-supervised vehicles, the "Certificate of Release from Supervision of the People's Republic of China Customs" or customs-approved transfer proof must also be submitted; (8) For vehicles transferred from embassies or consulates to non-embassy or consulate units or individuals, the vehicle purchase tax payment certificate or tax exemption voucher must also be submitted; (9) For vehicles exceeding the inspection validity period, the vehicle safety technical inspection certificate, vehicle and vessel tax payment or tax exemption certificate, and compulsory traffic accident liability insurance certificate must also be submitted; (10) For small and micro passenger vehicles transferring within or into the city, the city's small passenger car allocation or update indicator confirmation notice must also be submitted; (11) For vehicles transferring into the city, the vehicle file must also be submitted.
16
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.