Why is the Lavida's fuel consumption so high?

3 Answers
AndresFitz
07/29/25 1:06am
Lavida's high fuel consumption is mainly due to tire pressure being below standard and inaccurate four-wheel alignment. Below are specific explanations for Lavida's high fuel consumption: 1. Tire issues: When tire pressure is below standard, it increases the tire's contact area and rolling resistance, leading to wear on both tire shoulders and higher fuel consumption. The recommended inflation pressure is 0.1471~0.490MPa (1.5~5kg/cm²), with low-pressure tires generally suitable for private vehicles. Typically, the inflation pressure for household cars is 0.2~0.25MPa. 2. Inaccurate four-wheel alignment: If the vehicle's four-wheel alignment is off (incorrect toe and camber angles), it increases friction between the tires and the ground, damaging the tires and also raising fuel consumption.
Was this review help?
13
4
Share
Devin
08/12/25 10:48am
High fuel consumption in the Lavida is indeed a common issue, and as someone who has been driving for over a decade, I can think of several possible reasons. Driving habits are the most critical factor—if you frequently accelerate or brake abruptly, especially on city roads with many traffic lights, your fuel consumption will naturally increase. The Lavida's engine design also has some minor flaws; the 1.4T model, for instance, isn't very fuel-efficient at low speeds, and traffic jams can make it even thirstier. Insufficient tire pressure is another major factor—every 0.5-point drop in tire pressure can increase fuel consumption by 5%, so remember to check it regularly. Maintenance is another issue; a dirty air filter or old engine oil can strain the engine, indirectly driving up fuel consumption. My advice is to maintain a steady driving rhythm, anticipate traffic lights to reduce sudden braking, and record fuel consumption changes after each refueling—persistence in these habits can save you a lot. Also, consider your route—opting for highways over crowded city roads can effectively reduce fuel usage.
Was this review help?
10
1
Share
Expand All
DiSavannah
10/01/25 8:34am
I've been driving a Lavida recently, and the high fuel consumption is really frustrating. It feels like a combination of multiple factors, such as the vehicle weight issue. The Lavida has a solid chassis but the body isn't exactly light, and the high wind resistance at speed leads to faster fuel consumption. Driving habits also need to be reviewed—frequent overtaking or using lower gears just wastes fuel unnecessarily. The cleanliness of the air filter is crucial too; when it's dirty, it restricts airflow and reduces engine efficiency. Add to that the impact of traffic conditions—during peak hours in the morning and evening, prolonged engine idling in traffic naturally increases fuel consumption. I'd recommend switching to fuel-efficient tires and maintaining a speed of around 80 km/h for optimal economy. Another point is fuel quality—using low-grade gasoline can easily lead to carbon buildup, so getting regular fuel system cleanings at the shop can help. I've tried these adjustments, and there's indeed a downward trend in fuel consumption.
Was this review help?
18
3
Share
Expand All
More Forum Discussions

What does vehicle registration location refer to?

Vehicle registration location refers to the jurisdiction where the vehicle is registered, primarily determined by the location of the vehicle management office where the registration is processed. The location of the vehicle management office indicated by the registration seal at the bottom left of the main page of the motor vehicle license is the vehicle's registered location. The vehicle license consists of three parts: the license holder, the main page, and the supplementary page. Among them: the front side of the main page contains the endorsed core document, the back side displays the vehicle's photograph, and it is sealed with a plastic cover. The supplementary page is the endorsed core document. Materials required for registration application: (1) Identity proof of the vehicle owner. (2) Proof of vehicle origin, such as the purchase invoice. (3) Proof of vehicle compliance with national standards for whole vehicle factory production or import documentation for imported vehicles. (4) Proof of payment of vehicle purchase tax or tax exemption certificate. (5) Proof of compulsory motor vehicle traffic accident liability insurance. (6) Proof of payment or tax exemption for vehicle and vessel tax. (7) Other proofs and certificates required by laws and administrative regulations to be submitted during vehicle registration.
3
0
Share

Is there a charge for checking tire pressure warning at a 4S shop?

Tire pressure warning checks at a 4S shop are generally free. Related information: 1. Introduction: Tire pressure, strictly speaking, refers to the air pressure inside the tire. There is a standard tire pressure indicator printed on the rear end of the driver's side door, which is the pressure when the tire is cold, i.e., when the car has been parked for at least three hours or driven no more than 1.6km. The tire pressure is most accurate when measured with the tire cold. 2. Expansion: Air pressure is the lifeblood of the tire. Both too high and too low pressure will shorten the tire's service life. Low pressure will increase the deformation of the tire body, easily causing cracks on the tire side, and also generate flexing motion, leading to excessive heat, promoting rubber aging, fatigue of the cord layer, and breaking of the cords. It will also increase the tire's contact area with the ground, accelerating wear on the tire shoulders.
4
5
Share

What is the normal operating temperature for Cummins engines?

Cummins engines typically operate at a normal temperature of around 90℃. Here are relevant details: 1. About Cummins: Cummins Inc. (NYSE: CMI) was established in 1919 and is headquartered in Columbus, Indiana, USA. The company is named after its founder, Clessie Lyle Cummins, a self-taught automotive technician and mechanical inventor. 2. Causes of abnormal high temperature: When the vehicle operates at high RPM, the generated heat cannot be promptly transferred to the coolant, affecting heat dissipation. This leads to increased coolant temperature, potentially causing boiling-over issues. If this occurs while driving, reduce speed first and promptly conduct an inspection.
17
3
Share

What are the five items to check before starting the car in Subject 3?

The inspection includes: checking the lights, checking the gear position, checking if the engine is started, inspecting the surroundings of the car, and checking the handbrake. Below is the relevant introduction: 1. Subject 3: Subject 3, which includes the road driving skills test and the safety and civilized driving knowledge test, is part of the motor vehicle driver's license assessment. It is the abbreviation for the road driving skills and safety and civilized driving knowledge test in the motor vehicle driver's examination. The content of the road driving skills test varies for different types of vehicles. 2. Test content: preparation before getting on the car, simulated nighttime light test, starting, driving in a straight line, shifting gears, changing lanes, pulling over to the side, going straight through intersections, turning left at intersections, turning right at intersections, passing through pedestrian crossings, passing through school zones, passing through bus stops, meeting oncoming vehicles, overtaking, making U-turns, and driving at night.
11
1
Share

What is the reason for the abnormal noise when a car drives on cement roads but not on asphalt roads?

Car noise on cement roads but not on asphalt roads is because: cement roads are not smooth and produce sound when in contact with tires, while asphalt roads do not. Related introduction: 1. Introduction: Tires are circular elastic rubber products assembled on various vehicles or machinery for rolling on the ground. They are usually mounted on metal rims, supporting the vehicle body, cushioning external impacts, achieving contact with the road surface, and ensuring the vehicle's driving performance. 2. Expansion: Tires are often used under complex and harsh conditions. They endure various deformations, loads, forces, and high and low temperatures while driving, so they must have high load-bearing performance, traction performance, and cushioning performance. At the same time, they are also required to have high wear resistance and flex resistance, as well as low rolling resistance and heat generation. Half of the world's rubber consumption is used for tire production, indicating the significant rubber consumption capacity of tires.
7
4
Share

How to align the timing chain of Yunnei D19 engine?

Align the positions of the two camshafts for the dual camshafts. Related introduction: 1. Introduction: The main function of the engine timing belt is to drive the valve train of the engine, ensuring that the intake and exhaust valves open or close at the appropriate time to allow the engine cylinders to intake and exhaust normally. In some models, such as the Volkswagen Jetta (EFI), Santana 2000, Bora, Audi, etc., the timing belt also drives the water pump. 2. Expansion: The "timing belt" or "timing chain" is an important component of the engine. The main function of the "timing belt" or "timing chain" is to drive the valve train of the engine, ensuring that the intake and exhaust valves open or close at the appropriate time to allow the engine cylinders to intake and exhaust normally. In some models, the timing belt also drives the water pump, such as the Volkswagen Jetta EFI, Bora, Sagitar, Audi, etc.
19
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.