Why is the Languid seat a bit tilted?

1 Answers
LukeDella
07/29/25 8:10pm
If the car seat is tilted, it is recommended to check whether the seat fixing bracket has collapsed, and deal with the problem accordingly. Here is some introduction about the Languid seat: 1. There is an adjustment button next to the Languid seat, which the driver can use to adjust. Adjusting the seat to a suitable height is the prerequisite for obtaining a good driving view. When adjusting the seat, the height adjustment is usually the first step. During adjustment, it is necessary to ensure that there is at least a fist-sized distance between the head and the roof to prevent the head from hitting the roof when the vehicle bumps. 2. In terms of adjusting the front and rear position of the seat, except for people with special height, it is incorrect to have the seat too far forward or backward. If the seat is too far forward, the space for limb movement will be reduced. The correct approach is to ensure that after the right foot fully presses the brake, the knee joint is still in a natural slightly bent state.
Was this review help?
16
1
Share
More Forum Discussions

When will China 6 be implemented?

Currently, the country divides the "China 6 standard" into two phases: "China 6a" and "China 6b", and plans to implement them nationwide uniformly in 2020 and 2023 respectively. Here is the extended information: 1. The role of implementing China 6: The China 6 standard, also known as the "National Sixth Stage Motor Vehicle Pollutant Emission Standard", is formulated to implement environmental protection laws, reduce and prevent pollution from vehicle exhaust to the environment, protect the ecological environment, and ensure human health. 2. Impact on China 4 and China 5 vehicles: After the implementation of the China 6 emission standard, all vehicles sold and registered must meet the requirements of the China 6 emission standard. Vehicles below the emission standard will be prohibited from being sold, registered, or transferred. China 4 and China 5 emission vehicles will only be allowed to be scrapped or relocated to regions where the China 6 standard has not yet been implemented.
5
0
Share

How to turn off ECO in Fit?

To deactivate the ECO mode in the Fit, press the energy-saving mode button located next to the gear shift. ECO stands for the initials of three English words: Ecology, Conservation, and Optimization. It is a vehicle energy-saving mode that, when activated, helps conserve energy. How ECO works: ECO primarily functions by comprehensively analyzing and judging various factors during vehicle movement that affect fuel consumption, such as automatic transmission gear position, engine speed, vehicle speed, braking, and transmission oil temperature. The ECU control unit calculates the optimal fuel amount to supply the engine for operation, effectively reducing fuel consumption compared to normal driving modes. In simple terms, it controls the engine's speed with appropriate gear positions to minimize unnecessary fuel consumption.
15
0
Share

What is the fuel consumption of the Hyundai ix35?

New ix35 real fuel consumption is around 10L. Additional information: 1. Factors affecting car fuel consumption: Factors affecting car fuel consumption include driving habits, road conditions, tire pressure, and external environment. To reduce fuel consumption, the first thing to do while driving is to develop good driving habits. If driving in urban areas, avoid sudden acceleration or deceleration. Statistics show that incorrect driving habits can increase fuel consumption by 5-30%, and also lead to carbon deposits in the engine, affecting normal car use. 2. Introduction to Hyundai ix35: The Hyundai ix35 is a compact SUV launched by Beijing Hyundai. In terms of power, this car offers two engine options: a 1.4T turbocharged engine and a 2.0L naturally aspirated engine. Compared to similar models, this car's fuel consumption is relatively higher.
2
5
Share

Does a new car need underbody armor?

Choose underbody armor based on the owner's needs. If you frequently drive on special road sections, it is recommended to install it. Underbody armor is a high-tech adhesive rubber asphalt coating that can be sprayed on parts of the car such as the chassis, fuel tank, and lower guard plates. These parts are exposed to the air and prone to damage. Underbody armor can quickly form an elastic protective layer, providing excellent protection for the car's chassis. The advantages of underbody armor are as follows: 1. Corrosion resistance: The car's chassis is exposed during daily use and is prone to rust. When driving in relatively humid environments, residual washing water on the chassis can corrode it over time, leading to rust. Applying underbody armor can help prevent corrosion of the car's chassis. 2. Stone impact protection: During driving, small stones can be kicked up. At high speeds, the destructive force of these stones increases, potentially causing damage to the car's chassis. After applying underbody armor, the destructive force of small stones can be reduced, protecting the car's chassis from being pierced by stones, which also contributes to the maintenance of the car's chassis.
5
4
Share

What is the maximum displacement of the Patrol?

The Patrol has displacements of 4.0L and 5.6L. Additional information: 1. 4.0L model: The 4.0L model is equipped with a naturally aspirated V6 engine, with a maximum output of 279 horsepower, maximum power of 205 kilowatts, peak torque of 394 Newton-meters, and is paired with a 7-speed automatic transmission. 2. 5.6L model: The 5.6L model is equipped with a naturally aspirated V8 engine, with a maximum output of 406 horsepower, maximum power of 298 kilowatts, peak torque of 560 Newton-meters, and is paired with a 7-speed automatic transmission. The Patrol is Nissan's first full-size SUV, with body dimensions of 5140mm in length, 1995mm in width, and 1955mm in height, and a wheelbase of 3075mm.
13
5
Share

What Does Car Replacement Mean?

Car replacement refers to the process of taking your existing car to a 4S dealership for valuation, then selecting a new car to purchase and paying the difference in price. Nowadays, car replacement is not limited to the same brand; it can also be done between different brands. Below is an introduction to car replacement: 1. Advantages: There may be preferential prices, saving money. The owner only needs to drive the old car to the dealership, have its value assessed, and then pay the difference to complete the replacement process. 2. Considerations: Ensure all required documents are prepared. These mainly include the original and photocopies of the ID card, the original and photocopies of the vehicle's initial purchase invoice or the last transfer invoice, the original and photocopies of the vehicle's registration certificate, and the original and photocopies of the vehicle's driving license. All fines must be paid, and any traffic violation records must be cleared.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.