Why is the inside of the car windshield blurry?

Is the right side too narrow when reversing into the parking space due to late or early steering?

There are two scenarios when the right side becomes too narrow while reversing into the parking space: 1. If it's a left-side reverse parking, the steering was too late. 2. If it's a right-side reverse parking, the steering was too early. There are two main methods for reverse parking: 1. "Non-character style" reverse parking. In this method, the vehicle is perpendicular to the target parking space, using the B-pillar as a reference point and the first parking space as a marker, you can generally reverse into the third parking space. This positioning method is more suitable for novice drivers, with the advantage of being relatively easy to complete in one attempt if mastered well, but the drawback is being somewhat mechanical. 2. "Straight-line" parallel parking. In "straight-line" parallel parking, you use the vehicle in front as a reference, align your car body, turn the steering wheel to the right, and when the angle between the two cars reaches 45 degrees, observe and straighten the wheel while reversing. With proper estimation, you can usually complete the parking in one attempt.

17

3

Share

Why does the wiper keep making noise?

There are several reasons why the wiper keeps making noise: 1. Fine streaks, fog, or linear residues appear on the glass. Foreign objects are attached, such as sand particles or dust on the triangular edge, or the edge is damaged. Clean the edge or replace the wiper blade. 2. The swing is not smooth, and the wiper jumps abnormally. The edge of the wiper blade is bent or wavy, or there are residues like wax or oil film on the glass surface. Wipe the glass clean or replace the wiper blade. 3. The contact surface of the rubber cannot fully adhere to the glass surface, resulting in wiping residues. After prolonged use, the rubber hardens, loses elasticity, or becomes damaged. Replace the wiper blade. 4. The glass surface shows a water film state after wiping. The wiper arm is deformed due to rust or external force. Replace the wiper.

1

0

Share

Is Light Braking Required When Changing Lanes?

Changing lanes does not require tapping the brakes. When a vehicle needs to change lanes, the driver should first observe the traffic conditions behind, to the sides, and in the target lane using the interior and exterior rearview mirrors and windows. After confirming there are no vehicles in these areas, the driver can proceed with the lane change. Below is detailed information about vehicle braking: 1. Braking: Braking, also known as deceleration, refers to the action of stopping or reducing the speed of moving locomotives, vehicles, and other transportation tools or machinery. The braking device is a mechanical deceleration mechanism, also called a retarder. 2. Braking System: The braking system consists of the control system, hydraulic system, and power assist system. The control system includes the brake pedal and handbrake. The hydraulic system is composed of hydraulic fluid, the brake pump, and hydraulic lines. The power assist system includes the vacuum booster. The electronic control system consists of the ABS pump, ABS sensors, and ABS computer. The execution system includes the brake calipers, brake pads, and brake discs.

7

3

Share

What Could Be the Reason for Car Windows Opening Unexpectedly When Parked Outside?

Doors automatically unlocking after the car is locked usually occurs when the vehicle's computer detects that one or several doors are not properly locked, prompting it to issue a command to unlock all doors. This situation is generally caused by a faulty or short-circuited door lock detection switch, leading the vehicle's computer to receive incorrect signals. In rare cases, it may be due to a damaged door lock. Introduction to Car Doors: 1. Overview: Car doors provide access for drivers and passengers, isolate external disturbances, and to some extent mitigate side impacts to protect occupants. 2. Classification: Based on the number of doors, cars can be categorized into two-door, three-door, four-door, and five-door models. Cars used for official purposes are mostly four-door, while those for family use can be four-door, three-door, or five-door. 3. Design: Ensures ease of passenger entry and exit, with the maximum opening angle controlled at around 65° to 70°.

15

3

Share

What's the matter when the car clutch suddenly fails?

For any manual transmission car, there is a possibility of encountering clutch failure while driving, which can result in the inability to shift gears, especially the inability to shift from neutral to first gear to start. In the event of such an emergency, if conditions permit, it is best to have the rescue vehicle handle it. The relevant introduction about the clutch is as follows: 1. Introduction one: The clutch belongs to the car's transmission system, and this component is very important for the car. The clutch is responsible for connecting or disconnecting the engine and the transmission, and it is installed between the engine and the transmission. The clutch pressure plate is fixed to the engine flywheel, and the clutch disc is located between the pressure plate and the flywheel. 2. Introduction two: When stopping the car, pressing the clutch is equivalent to cutting off the power. At this time, the brake acts on the tires and has no effect on the engine operation, so it will not cause the engine to stall.

3

2

Share

Does Rust Remover Affect Car Paint?

Rust remover can damage car paint. Car paint is primarily composed of resin-based organic compounds, which are relatively fragile. Many substances in the natural environment can harm car paint. The paint itself oxidizes naturally when exposed to air, and daily driving encounters such as water stains, bird droppings, acid rain, and tree sap can also erode the paint surface. If not cleaned promptly, these can reduce the decorative and protective qualities of the paint. Below are methods to protect car paint: 1. Waxing: Waxing can be either direct waxing or polishing waxing. Direct waxing involves cleaning the car body and applying wax directly to the clear coat on the outermost layer of the paint. Polishing waxing, on the other hand, requires using a polishing machine to polish the paint surface before applying wax, which can immediately make the car shine. 2. Glazing: Due to the composition of the glaze, it is not resistant to acid or alkaline cleaning and is easily damaged, typically lasting only 1 to 3 months. Moreover, glazing can harm the paint, requiring reapplication every two to three months. 3. Crystal Coating: Crystal coating is a hard protective layer specifically designed for key areas such as car paint, seats, interior and exterior trim, glass, and tires. It comes in fast-drying and slow-drying types, primarily determined by its main ingredients. 4. Film Application: Automotive coating is a highly effective protective measure that can brighten the paint surface while also providing multiple benefits such as resistance to acids and alkalis, high-temperature tolerance, strong waterproofing, oxidation resistance, and UV protection.

18

2

Share

Why is the inside of the car windshield blurry?

Is the right side too narrow when reversing into the parking space due to late or early steering?

Why does the wiper keep making noise?

Is Light Braking Required When Changing Lanes?

What Could Be the Reason for Car Windows Opening Unexpectedly When Parked Outside?

What's the matter when the car clutch suddenly fails?

Does Rust Remover Affect Car Paint?

Does Half Fuel Gauge Mean Half Tank?

What is a Pre-tensioner?

Why is it not recommended to install tire pressure monitoring for new cars?

What items are included in a car first aid kit?