Why is the Haval M6 so affordable?

1 Answers
SanMatteo
07/29/25 10:58pm
Haval M6 is affordable because its technology is already very mature, and the supply chain is relatively complete. Compared to the H6, there is no significant difference between the two, both are excellent. Here are the relevant details: Reason one: In terms of appearance, the Haval M6 is a model based on the older H6. A large number of sporty and straight lines outline sharp contours, with exaggerated angles, making the exterior look more dynamic. Reason two: In terms of power, it features a 1.5T turbocharged engine with 150 horsepower and a maximum torque of 210 Nm. The chassis adopts a front MacPherson independent suspension and a rear double-wishbone independent suspension.
Was this review help?
8
4
Share
More Forum Discussions

What is the difference between 18-inch and 19-inch tires?

18-inch and 19-inch tires have similar tire widths, and the rolling radius error is less than 0.4%, which means they should have almost the same footprint. Differences can be observed in the following aspects: 1. From the perspective of braking performance: There is almost no difference in dry braking performance between 18-inch and 19-inch tires. The dry handling performance of 18-inch tires is faster than that of 19-inch tires. In terms of wet braking performance, 18-inch tires perform the best. Cornering hydroplaning resistance is also best with 18-inch tires. Based on current objective data, there is almost no substantial difference between these two tire specifications. 2. From the perspective of subjective handling: During dry handling tests, the subjective feel of the tires improves as the size increases. The fastest lap times with 19-inch tires are not due to larger wheel sizes providing more grip, but because these tires offer sharper and more responsive steering, while 18-inch tires make the car feel softer and less precise. 3. From the perspective of comfort and noise: 18-inch tires transmit more road bumps to the driver, especially in the rear of the car. With 19-inch tires, comfort is significantly worse.
7
1
Share

What are the functions of each button on the 2020 Audi Q2L?

On the driver's side door, you can adjust the vehicle's windows and the angle of the rearview mirrors. Below the left air vent is the vehicle's headlight control area, below the central control screen is the air conditioning control area, behind the gear lever is the multimedia control area, and the buttons on the steering wheel can control the cruise control and the operation of the central control screen. Here is some extended information about the Audi Q2L: 1. Body dimensions: length 4190 mm, width 1790 mm, height 1510 mm, vehicle wheelbase 2600 mm. The model is positioned as a small SUV. This vehicle is now produced domestically. Compared to the overseas version, the domestic model has been enhanced in size, which fully considers the needs of domestic consumers. 2. Manufacturer: FAW-Volkswagen Automobile Co., Ltd. The company was jointly established by China FAW Corporation Limited, Volkswagen AG, Audi AG, and Volkswagen Group China Investment Co., Ltd. The establishment date was February 6, 1991, and the headquarters is located in Changchun City, Jilin Province.
8
3
Share

Why does the car make a clunking sound when shifting into reverse gear?

When shifting into reverse gear for backing up, since the vehicle's direction of movement is opposite to forward motion, there is a certain amount of play between the brake pads and the rear end of the bracket. Therefore, when braking, the brake pads will impact the rear surface of the bracket, resulting in a clunking noise. The clunking sound during reversing is a normal play-related noise and is not a sign of vehicle malfunction. Below are methods to avoid making noise when shifting into reverse gear: 1. Stop completely before shifting: Shifting into reverse gear before the car has completely stopped can cause significant damage to the transmission. When shifting into reverse, make sure to press the brake firmly to stop the car completely before shifting. 2. Depress the clutch fully: When shifting gears and pressing the clutch, ensure the clutch is fully depressed. Never shift into reverse gear with the clutch still partially engaged. 3. Reverse slowly: Avoid pressing the accelerator hard for rapid acceleration while reversing, as this can cause significant damage to the straight-cut gear teeth.
8
1
Share

What to Do When the Transmission Warning Light Comes On?

When the transmission warning light comes on, it may indicate a signal malfunction or issues with the circuit and computer board, requiring inspection and repair at a 4S shop. The possible causes for the transmission warning light to illuminate can be broadly categorized into the following three types: 1. False alarm: A fault code is reported, but the system operates normally. This could be due to an operation that temporarily exceeded the computer's control range, prompting the computer to feedback a fault code. The code can be cleared initially, and then observe whether the fault code reappears. 2. Minor fault: The transmission does not show any particularly obvious malfunction, but further inspection based on computer diagnostics reveals an actual issue that does not significantly affect normal driving or has minimal impact. It is important to detect and address such faults promptly. Examples include faults with the intake pressure sensor. 3. Major fault: Such faults can be easily detected through visual inspection and driving experience, and they severely affect the normal operation of the engine, necessitating immediate repair. For instance, noticeable engine power loss is likely due to issues like an oxygen sensor malfunction.
6
3
Share

Can You Drive Barefoot?

Yes, although there is no explicit national law prohibiting driving barefoot, some regional implementation regulations have added provisions prohibiting driving barefoot, in slippers, or in high heels (such as in Zhejiang, Nanjing, and other areas). Here is more information about vehicle operation: 1. Penalty for driving in high heels: Drivers are not allowed to drive motor vehicles in high heels, otherwise they will be given a warning and fined 50 yuan. If an accident occurs, they will be fined 200 yuan. Drivers who fail to maintain a safe distance and drive motor vehicles in high heels will be fully responsible for the accident. 2. Pay attention to observing the overall condition of the car before getting in: Check the exterior of the car, whether the tire pressure is sufficient, and whether there are any leaks of water or oil under the car. Regularly check whether the engine oil, windshield washer fluid, and coolant are sufficient. In winter, it is essential to warm up the car; otherwise, the water temperature will not reach the normal temperature, and the lubricating oil will be too viscous to achieve normal lubrication. Accelerating under these conditions will accelerate the wear of the engine and transmission. 3. Sudden honking: This may startle pedestrians, especially at intersections where children are crossing. In such cases, you should slow down or stop and wait. Additionally, if your view is obstructed while driving and you cannot see the road ahead, you should slow down and honk to prevent any people or cars from appearing there.
18
1
Share

What Should You Do When Driving Through Flooded Roads?

When driving through flooded roads, the following points should be noted: 1. Pay attention to water depth and braking: Be mindful of the water depth and braking speed to prevent engine stalling and brake failure. On rainy days, if there is standing water on the road, always check the water depth. If the water exceeds the height of the exhaust pipe, it can easily cause the vehicle to stall, so try to avoid such routes if possible. If you must drive through deep water where the depth exceeds half the tire height, proceed with caution. After passing through the water, pay attention to the foot brake and handbrake, as their effectiveness may be reduced after being submerged. 2. Road conditions in flooded areas: Understand the road conditions in flooded areas. Rainwater can make the road surface murky, but if the water is not flowing rapidly, you can still assess the general situation underwater. Areas with waves and whirlpools likely have large rocks or other obstacles, while calmer surfaces usually indicate deeper water. Open areas with uniform small waves typically have a shallow layer of gravel underneath, making them ideal for driving through. 3. Air intake: Lastly, when driving through water, protect the car's electrical components and air intake. Before entering the water, it's best to inspect all electrical components in the engine compartment. Exposed electrical parts and connectors should be sealed if possible. If necessary, adjust the position and height of the engine's air intake and exhaust. The moment the car enters the water, try to keep it as steady as possible. Sudden acceleration can splash water, potentially wetting electrical components or allowing water to enter the engine's air intake system.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.