Why is the Haval H6 so fuel-consuming?

1 Answers
OMia
07/30/25 4:19am
For the high fuel consumption of the Great Wall Haval H6, you can pay more attention to driving habits. Generally speaking: avoid prolonged engine idling, and try to avoid sudden braking and acceleration. Use high and low gears reasonably and maintain an appropriate driving speed. Additionally, perform regular vehicle maintenance: dirty air filters and oil filters, worn spark plugs, and problematic emission control systems can all increase fuel consumption. Apart from personal driving habits, the following factors may also contribute to the high fuel consumption of the Great Wall Haval H6: 1. Tires: Tires are relatively easy to check, so they should be inspected first. If the tire pressure is insufficient, fuel consumption will increase. If the tire pressure is normal, check the wear level of the tires. Severe tire wear can lead to frequent slipping, which also increases fuel consumption. 2. Engine: If there is a significant buildup of carbon deposits in the engine over a short period, it can also cause high fuel consumption. This situation is likely due to the use of substandard fuel. The solution is to add a certain amount of cleaning agent when refueling. If the effect is not noticeable, it indicates a substantial buildup of carbon deposits in the engine, in which case it is best to take the vehicle to a 4S shop or repair shop for professional cleaning by a technician. 3. Oxygen Sensor: As an internal control unit in the car, the oxygen sensor primarily monitors the fuel-air ratio in the engine. Once it is damaged, it will disrupt the fuel-air ratio, inevitably leading to abnormal increases in fuel consumption. After the oxygen sensor is damaged, the vehicle will emit darker exhaust gases during operation. In this case, the oxygen sensor should be replaced as soon as possible. 4. Faulty Engine Control Unit: Although the electronic control unit (ECU) of the engine is highly reliable, faults may still occur in older vehicles. If one of the control units malfunctions, it may lead to increased fuel consumption, accompanied by poor performance and thick, black exhaust emissions.
Was this review help?
16
3
Share
More Forum Discussions

What are the symptoms of unstable engine idle speed?

Unstable idle speed of a car engine mainly manifests in the following aspects: 1. The tachometer needle fluctuates up and down during idle, showing instability. 2. Vibration occurs during idle. The following are the reasons for unstable idle speed: 1. Clogged fuel injector: Leads to insufficient fuel supply pressure. Clogging of fuel injectors is usually caused by gum and carbon deposits in gasoline. 2. Faulty water temperature sensor: The car's water temperature sensor is generally installed on the engine block (or possibly on the water jacket of the cylinder head) and directly contacts the coolant (antifreeze) to measure the temperature of the engine coolant. Once the water temperature sensor fails, the car may experience unstable idle speed, difficulty starting when cold, inability to increase speed, and significantly increased fuel consumption. 3. Faulty throttle position sensor: The throttle position sensor detects whether the engine is in idle condition or under load operation, and whether the car is accelerating or decelerating. Damage to the throttle position sensor can cause engine vibration and unstable idle speed. 4. Air intake system leakage: The ECU controls the mixture concentration primarily based on intake air information such as water temperature, throttle opening, and engine speed provided by the air flow meter. Leakage in the intake air system can cause the ECU to inaccurately control the intake air volume, leading to unstable engine idle speed. 5. Exhaust system blockage: Causes poor exhaust, resulting in symptoms such as weak acceleration, reduced power, and unstable idle speed. 6. Weak spark from individual spark plugs: Leads to cylinder misfire, causing unstable engine idle speed, and may also result in black smoke from the exhaust pipe, reduced power, and backfiring.
3
0
Share

Load Index and Speed Rating?

1. Meaning of Load Index: The numerical value indicating the maximum load that a tire can bear under specified conditions when inflated to its maximum air pressure. It is usually represented by a number. If the total weight of the vehicle exceeds this value, the tire deformation will be significant, leading to increased heat generation during prolonged operation, ultimately causing tire fatigue damage, reduced lifespan, and even structural failure resulting in a blowout accident. 2. Meaning of Speed Rating: It is denoted by a letter, ranging from J to Z. Under the corresponding load capacity of the relevant load index, each letter represents the maximum permissible speed of the tire.
19
3
Share

Where to Register a Tricycle in Beijing?

In Beijing, tricycles can be registered at the vehicle management office in the residential area, but they must comply with the national "General Technical Conditions for Electric Bicycles" and be included in Beijing's electric bicycle product catalog. Relevant information about license plates is as follows: 1. Introduction: License plates, commonly known as vehicle plates, refer to the plates hung at the front and rear of a vehicle, displaying the vehicle's registration number, registration area, or other relevant information. 2. Function: License plates serve as a numbering and information registration system for vehicles. Their primary purpose is to identify the vehicle's region of registration and to trace the vehicle's owner and registration details through the license plate number.
3
0
Share

How to Check Traffic Violations for a Vehicle Not Registered Under Your Name?

For vehicles not registered under your name, you can check traffic violations at the traffic violation processing hall or window of the traffic management department. Below is detailed information about vehicle violations: 1. Overview: Vehicle violations refer to acts where motor vehicles violate the Road Traffic Safety Law and traffic management regulations. Penalties for vehicle violations include warnings, fines (vehicle impoundment), temporary suspension of driver's license, revocation of driver's license, cancellation of driver's license, administrative detention, and criminal liability for acts constituting crimes. 2. Basis for Penalties: According to the 'Road Traffic Safety Law of the People's Republic of China', traffic management departments of public security organs and their traffic police should promptly correct road traffic safety violations. Penalties for road traffic safety violations should be imposed based on facts and relevant provisions of this law.
5
4
Share

What is the symbol for coolant?

The coolant symbol is highly recognizable. Below the coolant symbol are two wavy lines representing water, with a thermometer inserted between them. Modern vehicles use water-cooled engines, which rely on the continuous circulation of coolant to dissipate excess heat. Relevant information about antifreeze is as follows: 1. Introduction: The full name of antifreeze should be antifreeze coolant, meaning a coolant with antifreeze properties. Antifreeze prevents the coolant from freezing and expanding in cold winter conditions, which could otherwise crack the radiator or damage the engine cylinder block or cylinder head. 2. Function: It provides anti-corrosion protection for components of the cooling system; prevents scale formation, avoiding reduced radiator efficiency; ensures the engine operates within the normal temperature range.
13
5
Share

How to Avoid Stopping Midway in Subject 2?

Here are methods to prevent stopping midway during the Subject 2 test: 1. During the test, when passing over uneven ground or seams between cement blocks in the testing area, slightly increase the speed. 2. When turning the steering wheel to its limit, slightly release the clutch to prevent stopping midway; when straightening the wheel, slightly press the clutch to control the speed. Below are reasons for stopping midway in Subject 2: 1. Inadequate mastery of the clutch, causing the speed to fluctuate and suddenly stop. 2. Insufficient flatness of the testing area. Small pits or slight slopes, though minor, can cause the car to stop briefly. 3. When turning the steering wheel to its limit, the angled front wheels create significant resistance, causing the car to stop briefly.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.