Why is the Haval F5 not reminding to fasten the seat belt?

2 Answers
McKiara
07/24/25 1:53pm
Haval F5 seat belt not reminding reasons: 1. Damaged seat belt socket; 2. Pressure sensor not detecting. The Haval F5 is an entry-level compact SUV, featuring a 12.3-inch full-color digital LCD instrument panel and a 9-inch HD LCD touch screen. It is equipped with the Interconnect 3.0 system, including remote vehicle control, online services, and intelligent voice interaction system. Online functions include navigation, music, and more. The Haval F5 uses MacPherson independent suspension for the front arms and double-wishbone independent suspension for the rear arms, with ventilated disc brakes for both front and rear wheels. The vehicle's dimensions are 4470mm in length, 1857mm in width, and 1638mm in height, with a wheelbase of 2680mm.
Was this review help?
2
0
Share
LeFaith
08/11/25 7:49am
I often help friends fix their cars. The seatbelt reminder not working is quite common on the Haval F5. The usual causes are the sensor under the seat getting stuck or loose—vehicle vibrations can easily cause this. It could also be dirty electronic contacts in the seatbelt buckle, where dust buildup leads to poor connection, or a short circuit or break in the wiring connected to the dashboard. A blown fuse is another possibility. You can do a quick check before driving: open the car door, crouch down to see if there’s any obstruction under the seat sensor, try inserting and removing the seatbelt a few times to listen for sounds, or check the car manual for the fuse location and test it with a replacement. If none of these work, the control module might be faulty and require professional diagnostic tools. Don’t forget that a malfunctioning seatbelt reminder increases accident risks—address it early to avoid regrets.
Was this review help?
14
1
Share
Expand All
More Forum Discussions

What is the normal voltage output of a car alternator?

Car alternators typically produce a voltage between 13.5-14.5V. Here's some knowledge about car alternators: 1. Introduction: The car alternator serves as the main power source for vehicles. Its function is to supply power to all electrical devices (except the starter) while simultaneously charging the battery when the engine is running normally. Based on the three-phase stator winding of a conventional AC generator, it increases the number of winding turns with additional lead wires and adds a three-phase bridge rectifier. At low speeds, it outputs through the series connection of the original winding and additional winding, while at higher speeds, it only outputs through the original three-phase winding. 2. Classification: Automotive generators can be divided into DC generators and AC generators. Since AC generators outperform DC generators in many aspects, DC generators have been phased out.
6
4
Share

Will changing to short springs on a car be checked by traffic police?

Generally, changing to short springs on a car will not be checked by traffic police. Below is an introduction to the benefits of short springs: 1. Handling: The main purpose of modifying springs is to improve handling, which means switching to stiffer or shorter springs. Springs control many factors related to handling, and changes to springs can result in complex alterations to handling characteristics. Increasing stiffness can enhance the suspension's ability to resist roll, reducing body roll during cornering. Lowering the vehicle height can simultaneously lower the center of gravity, reducing weight transfer during cornering and improving stability. Lowering the vehicle height can also enhance aesthetic appeal. 2. Center of Gravity: The most important method to improve handling is to lower the vehicle's center of gravity, which reduces weight transfer and body roll during cornering. The simplest way to lower the vehicle is by modifying the springs. Using short springs is the easiest and quickest method.
15
0
Share

What is the fuel consumption per 100 kilometers for the Tiida?

The Tiida currently has 4 models on sale. Among them, the Tiida TIIDA 2021 1.6L Manual Ledong Edition, equipped with a 122 horsepower engine, has an NEDC fuel consumption of 6L per 100 kilometers. The other three models—Tiida TIIDA 2021 1.6L CVT Zhixing Edition, Kudong Edition, and Zhizun Edition—also equipped with 122 horsepower engines, have an NEDC fuel consumption of 5.3L per 100 kilometers. The Tiida uses 92-octane fuel, with an average fuel price of 8.05 yuan/L. The fuel cost per 100 kilometers for different models is as follows: Tiida TIIDA 2021 1.6L Manual Ledong Edition: 6*8.05=48.3 yuan per 100 kilometers. Tiida TIIDA 2021 1.6L CVT Zhixing Edition, Kudong Edition, and Zhizun Edition: 5.3*8.05=42.665 yuan per 100 kilometers. All Tiida models have a fuel tank capacity of 50L. The distance that can be covered on a full tank is as follows: Tiida TIIDA 2021 1.6L Manual Ledong Edition: 50/6*100=833km on a full tank. Tiida TIIDA 2021 1.6L CVT Zhixing Edition, Kudong Edition, and Zhizun Edition: 50/5.3*100=943km on a full tank. Automobile fuel consumption is directly influenced by five major factors: driving habits, the vehicle itself, road conditions, natural wind, and environmental temperature. Specific factors that increase fuel consumption include: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not easing off the throttle before a red light, will increase fuel consumption. The vehicle itself: Vehicles with larger engine displacements generally consume more fuel than those with smaller displacements because larger displacements usually mean higher power output, requiring more gasoline for combustion. Heavier vehicles also consume more fuel due to the greater driving torque needed. Road conditions: Driving on unpaved roads, muddy roads, soft surfaces, or mountainous roads increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases vehicle resistance and fuel consumption. Low environmental temperatures: When the engine block is cold, the injected gasoline does not vaporize easily, requiring more fuel for combustion, which increases consumption. Additionally, in cold weather, the engine's computer may control higher idle speeds to warm up the engine, further increasing fuel consumption.
5
4
Share

Does Beidou's speeding alert result in fines?

Beidou's speeding alert does not result in fines. Here is some knowledge about speeding: 1. Definition: Speeding refers to a driver operating a vehicle at a speed exceeding the legal or regulatory limits. Turbine overspeed accidents are major malignant incidents caused by failures in the turbine's speed regulation and protection systems, as well as inherent defects. 2. Preventive measures: During shutdown, first activate the emergency governor to close the main steam valve and the speed control valve, ensuring the generator's active power is zero. After the current reverses, disconnect the generator. This prevents the generator from being disconnected for too long, as the unit is inoperable during this time. Prolonged periods can cause the exhaust temperature to rise due to windage, increase the differential expansion, and significantly impact the power grid.
4
3
Share

Is pressing the clutch for more than 5 seconds considered coasting in neutral?

During the test, if the car clutch is pressed for 5 seconds without any other accompanying operations, it will be treated as coasting in neutral. Here is more relevant information: 1. Key points of the Subject 3 test: The Subject 3 test involves frequent gear changes. You must press the brake when encountering road signs, red lights, temporary roadside parking, and entering pedestrian crossings. Pressing the brake requires pressing the clutch first. However, the Subject 3 test requires the student to stop the car immediately when intending to brake. This is a test and differs somewhat from real-world driving on the road. Gear shifting also involves pressing the clutch first and then decisively shifting gears without hesitation or keeping the clutch pressed continuously. Avoid the habit of always resting your foot on the clutch pedal. Every part of the test car is equipped with sensors and probes, and all your operations are recorded at all times. If the clutch is pressed for 5 seconds without any other operation, it will be judged as a test failure. 2. Difficulties in the Subject 3 test: Mismatch between speed and gear. You need to be aware of the errors of high gear at low speed and low gear at high speed during the test drive. Before shifting gears, you must increase or decrease the speed to match the gear, and then switch gears! During driving, remember to glance at the speedometer every eight seconds to prevent such errors.
18
3
Share

Why does my driver's license show as locked on 12123?

12123 backup non-motor vehicle review usually does not exceed 7 working days. The following is a related introduction about 12123;1. Definition: Traffic Management 12123 is the official client of the Internet Traffic Safety Comprehensive Service Management Platform, supported by the Traffic Management Research Institute of the Ministry of Public Security. It provides comprehensive traffic safety services for car owners and drivers, including: personal user registration on the Internet service platform, appointment, acceptance and handling of motor vehicle/driver's license/illegal processing and other businesses, traffic safety information inquiry, business notification and reminder, business guidance, road traffic services, etc. 2. Main functions: user registration, binding of personal motor vehicles and driver's licenses, handling of illegal acts recorded by electronic monitoring equipment, appointment for motor vehicle driver's license tests, pre-selection of new motor vehicle license plates.
3
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.