Why is the GK5 considered a supercar?

What Documents Are Required for New Vehicle Annual Inspection?

New vehicle annual inspection requires the following documents: 1. Vehicle license. 2. Complete original and duplicate copies. 3. Valid compulsory traffic insurance policy. 4. Vehicle and vessel tax payment receipt, which is usually combined with the compulsory insurance document. 5. ID card and its photocopy. For company vehicles, the business license and the agent's identification are required. Below are some preparation tips before the annual inspection: 1. Check if there are any traffic violations. If so, clear them at the traffic police station. 2. It's advisable to go for the inspection early, as many owners find out about unresolved violations only when they're at the inspection site, which can delay the process. 3. It's better to get the inspection done early in the month, as it's usually faster then.

1

4

Share

How to Identify the Quality of Brake Fluid?

Substandard or poor-quality brake fluid can corrode the rubber seals in the brake master cylinder and negatively impact braking performance. To assess brake fluid quality, consider the following three key indicators: 1. Boiling Point: Inferior brake fluid has poor high-temperature resistance, easily vaporizing under heat to form visible bubbles, which create airlocks in the brake lines and hinder proper fluid flow. 2. Low-Temperature Fluidity: Based on the kinematic viscosity characteristic of brake fluid, this refers to its flowability in cold conditions. In frigid northern regions, qualified brake fluid maintains normal flow, while substandard fluid may partially or fully solidify, severely compromising braking performance. Worse, if frozen fluid expands and ruptures brake lines, catastrophic consequences may follow. 3. Corrosiveness: Methanol-based or adulterated brake fluids exhibit strong metal corrosion. Testing involves immersing metal objects to observe rust formation.

7

1

Share

What does TC mean in a car?

When the "TC" indicator light on the car dashboard flashes, it means the "Traction Control System" is active. "TC" is the abbreviation for Traction-Control-System, which refers to the traction control system or anti-slip regulation system. Here are some details about the traction control system: 1. The traction control system relies on the electronic sensors of the ABS anti-lock braking system. When it detects that the speed of the driven wheel is lower than that of the driving wheel, indicating wheel slip, it sends a feedback signal to the car's system. The car system then adjusts the ignition timing, reduces the throttle opening, decreases the throttle, downshifts, or applies the brakes to prevent wheel slip. 2. The traction control system can transfer power to the road surface to avoid slipping, while also allowing the car to follow the driver's intentions, thereby improving driving safety.

4

Share

What is the reason for the abnormal noise when shifting to D gear and stepping on the brake?

The reason for the abnormal noise when shifting to D gear and stepping on the brake is due to severe wear of the ball joint under the gear, which requires replacing the gear oil or the ball joint. The ball joint, also known as the universal joint, refers to a mechanical structure that uses a spherical connection to transmit power between different axes. The causes of ball joint wear are as follows: 1. Poor performance of the shift fork shaft and too small clutch travel: Severe wear requires checking the corresponding movement position of the ball joint. 2. Excessive viscosity of the transmission oil and excessive wear of the synchronizer. 3. Poor performance of the clutch pressure plate, excessive wear of the synchronizer, and reduced performance of the clutch oil due to temperature effects.

11

4

Share

Why is the Buick Verano being recalled?

Buick Verano is being recalled due to the following reason: The front suspension equipped on the vehicle may deform or disengage when subjected to significant external force impact, which could potentially lead to loss of vehicle control under extreme circumstances, posing a safety hazard. Additional information about automotive recalls is as follows: 1. An automotive recall refers to the process where the manufacturer of defective automotive products eliminates the defects in their products in accordance with legal requirements and procedures. This includes the manufacturer effectively notifying relevant parties such as dealers, repairers, and vehicle owners about the specifics of the defects and the methods to eliminate them. The manufacturer then organizes dealers, repairers, etc., to eliminate the defects in their automotive products through specific measures such as repairs, replacements, or returns. 2. Automotive recalls have become a mature mechanism for addressing defects in automotive products, making significant contributions to safeguarding public safety, property security, and the healthy development of the automotive industry in various countries.

9

5

Share

Why does the Audi Q3 shake and report misfire?

Audi Q3 shaking and reporting misfire reasons are as follows: Spark plug aging: The spark plugs may have aged due to prolonged use, causing the electrode gap to become larger and wider, resulting in insufficient ignition energy and poor gasoline atomization. Additionally, many modern cars have three-cylinder or four-cylinder engines, each with a spark plug in every cylinder. These spark plugs can also develop larger gaps, leading to power differences between cylinders and causing vehicle shaking. Intake manifold carbon buildup: The engine intake manifold and valves can accumulate excessive carbon deposits, possibly due to a dirty throttle body or excessive carbon buildup in the fuel injectors and intake passages. During cold starts, carbon deposits can absorb some fuel. If the fuel does not completely enter the cylinder for combustion, it can cause unstable idling. This may result in carbon deposits absorbing some gasoline during cold starts, leading to excessively low mixture concentration in the engine cylinders, causing engine shaking and difficulty starting.

17

3

Share

Why is the GK5 considered a supercar?

What Documents Are Required for New Vehicle Annual Inspection?

How to Identify the Quality of Brake Fluid?

What does TC mean in a car?

What is the reason for the abnormal noise when shifting to D gear and stepping on the brake?

Why is the Buick Verano being recalled?

Why does the Audi Q3 shake and report misfire?

Can the Audi Q5 automatically lock after parking?

What is the difference between No. 92 gasoline and No. 92 diesel?

Which MINI model comes with a convertible top?

What Causes the Chassis Noise in Chery Tiggo 3?