Why is the Geely Binyue noisy when accelerating?

What does a wrench on the dashboard mean?

Dashboard showing a wrench is the maintenance indicator light. Here are the specific methods to eliminate the dashboard wrench: 1. Insert the key, just insert it, do not turn. 2. Hold the operating rod next to the odometer for 5-10 seconds, then turn to power on. 3. After another 5-10 seconds, start the car. This process requires continuously holding the operating rod. 4. If the wrench is not cleared, repeat the same process a few more times. 5. Different manufacturer models have different maintenance time settings; when the maintenance indicator light comes on should be based on the vehicle's user manual. After maintenance is completed, the technician will reset the maintenance light to zero through the setting procedure.

1

3

Share

What is the sequence of clutch, brake, and acceleration?

The sequence of clutch, brake, and acceleration is as follows: 1. The right pedal is the accelerator, used to increase speed; 2. The middle pedal is the brake, used for stopping; 3. The left pedal is the clutch, which disconnects the power from the engine to the transmission. The impact of the sequence of using the brake and clutch on the car and the correct practices are as follows: 1. If you frequently press the brake and clutch simultaneously, it will significantly shorten the lifespan of the car and, in severe cases, endanger lives. Therefore, using the brake and clutch correctly is very important. 2. The correct practice is: For emergency braking, you should press the brake first and then press the clutch after the speed decreases. This will prevent the engine from stalling and avoid damage to the car. During downhill driving, never press the clutch, as doing so is equivalent to coasting in neutral, which is extremely dangerous.

5

Share

How to Deal with Rust on the Car Body?

Here are the specific solutions for dealing with rust on the car body: 1. Use a wire brush or sandpaper to remove the paint from the damaged area, then decide whether to replace the entire panel or repair the damaged part based on the extent of the damage. If the damage is severe, it is best to replace the entire panel. If the damage is minor, remove the corroded and loosened metal. Use a hammer to tap the edges of the hole inward to create a slight depression for applying putty. Use a wire brush to remove rust particles from the metal surface, then apply a layer of rust-proof paint to prevent further rusting. 2. Zinc paste is suitable for filling large holes. Cut the zinc paste to roughly the size and shape of the hole, then stick it over the hole. The edges of the paste should be slightly lower than the surrounding panel. Apply filler around the edges of the paste before filling the hole completely, then repaint. 3. Thin aluminum sheets are suitable for filling small holes. Cut the thin aluminum sheet to the size and shape of the hole, remove the protective paper, and stick it over the hole. Depending on the thickness required, one or several layers can be applied. Press it firmly onto the panel, then fill with putty and repaint.

12

1

Share

How to Use an Adjustable Wrench?

Usage of an adjustable wrench is as follows: 1. An adjustable wrench consists of the wrench body, a fixed jaw, a movable jaw, and a worm gear, among other components. Its opening size can be adjusted within a certain range via the worm gear. 2. Before use, adjust the wrench size according to the part to be tightened, ensuring no gap to prevent slipping and damaging the part. 3. Ensure the wrench's opening line is parallel to the hexagonal sides of the nut. Do not place the wrench on the nut's corners before use, as this may damage the part. 4. Avoid using an overly large wrench to tighten smaller screws. 5. Do not reverse the direction; the fixed jaw should bear the main force to prevent the movable jaw from loosening, which could cause injury or part damage. 6. An adjustable wrench is designed for tightening and should not be used as a hammering tool. Additionally, do not arbitrarily extend the wrench handle. 7. Ensure no one stands in the direction of force application to prevent injuries caused by improper force. 8. After use, clean the wrench with alcohol or rust remover to prevent rust and ensure ease of future use.

13

1

Share

What is a Parallel Import Car?

Parallel import cars refer to vehicles that are purchased by traders from overseas markets and introduced into the Chinese market for sale without authorization from the brand manufacturer. Here is some information about parallel import cars: 1. Parallel import cars can be categorized into "American specification cars" and "Middle East version cars" based on their import origins, distinguishing them from "Chinese specification cars" sold through traditional channels. 2. Parallel import means "non-factory authorized," referring to vehicles imported into China by importers other than the original factory's general agent, typically sold in port auto malls or comprehensive auto markets across various regions.

19

0

Share

Does prolonged idling affect a sedan?

Prolonged idling can indeed have negative effects on a sedan. Here are the specific impacts of extended idling: 1. When the engine idles for long periods, the throttle opening remains small, requiring the fuel injectors to spray high-concentration fuel to maintain operation. Consequently, idling is more prone to causing carbon buildup than high-speed driving. Severe carbon deposits from prolonged idling directly impair the vehicle's power performance and comfort. 2. Idling significantly increases fuel consumption. Three minutes of idling consumes fuel equivalent to driving one kilometer. 3. During idling, lower cylinder temperatures and pressures prolong fuel ignition time, while reduced cylinder sealing makes the engine more susceptible to knocking sounds, shortening its service life. 4. Extended idling creates excessively rich air-fuel mixtures, resulting in low oxygen content in exhaust gases. Unburned mixture combusting at the catalytic converter can easily damage this component.

16

0

Share

Why is the Geely Binyue noisy when accelerating?

What does a wrench on the dashboard mean?

What is the sequence of clutch, brake, and acceleration?

How to Deal with Rust on the Car Body?

How to Use an Adjustable Wrench?

What is a Parallel Import Car?

Does prolonged idling affect a sedan?

Which button is the child lock on the Fit?

How Can Beginners Drive Straight?

What is the AC in the air conditioning system?

What Causes Glass to Shatter?