Why is the Fuxi AS125 also called the Night Runner?

Is Drilling Holes for Car Dent Repair a Concern?

There is no need to worry excessively as the drilled holes will be refilled with metal plastic steel putty, which will not have any impact on the vehicle. Car dent repair technology, also known as micro bodywork or non-destructive bodywork, differs from traditional bodywork techniques primarily in its non-destructive nature. 1. Purpose: This technology was developed to address small dents and dings caused by hail on vehicles. Cars hit by hail often have bodies covered in dents, and without this technology, owners would have no choice but to opt for full bodywork and repainting. 2. Types of dents that cannot be repaired: The first type: Stretched metal dents. Metal has ductility, and if the deformation is too severe causing the metal to stretch, the dent cannot be repaired. The second type: Dents that tools cannot reach. The tools referred to here are specialized lifting tools for car dent repair. 3. Drawbacks of car dent repair: Car dent repair technology has no significant drawbacks; it simply restores the deformed area through physical means. Dents in the fender wheel arch area may require drilling holes, but not all vehicles need this procedure.

6

3

Share

What Do the 2 and L Gears Mean on an Automatic Transmission?

L stands for LOW, meaning low gear, which is the same as the numerical gear 1. Both are used to limit the gear to the lowest position to obtain high torque without shifting up. The number 2 represents limiting the gear between 1st and 2nd gears, which is useful for starting on slippery roads or moving slowly to restrict gear shifting. When driving on icy or snowy roads or in traffic jams, where the vehicle moves slowly, using D gear can cause the gear to fluctuate, increasing fuel consumption. Switching to L gear ensures the vehicle remains in 1st or 2nd gear, avoiding extra fuel consumption and wear on the vehicle. It is also suitable for uphill and downhill driving. In addition, automatic transmissions have other gears like P, R, N, D, S, and M. Here’s a detailed introduction: P (Parking) Gear: Used for long-term parking. It locks the vehicle's rotating parts mechanically by engaging the parking brake inside the transmission, securing the output shaft and applying the handbrake to prevent movement. R (Reverse) Gear: Used for reversing. Many models have a safety mechanism requiring the driver to press a button on the gear lever before shifting to R. N (Neutral) Gear: Similar to manual transmission neutral but not identical. N gear can be used when starting the engine, towing, or during temporary stops (e.g., at traffic lights). D (Drive) Gear: The most commonly used gear for normal driving conditions. S (Sport) Mode: In this mode, gears can shift freely, but the shift timing is delayed to keep the engine at higher RPMs for increased power. However, this mode increases fuel consumption. M (Manual) Gear: This is the manual mode for automatic transmission vehicles. In M gear, drivers can manually shift gears using the + and - symbols near the gear lever. The + symbol upshifts, while the - symbol downshifts.

9

4

Share

What are the functions of the center console buttons in the 2020 Mercedes-Benz GLA200?

The center console buttons of the Mercedes-Benz GLA200 are very comprehensive. Here is a detailed introduction: 1. Overview: The 2020 Mercedes-Benz GLA200 features a 10.25-inch center multimedia screen equipped with the MBUX system. The functions are clearly divided and can be operated via touch or handwriting pad, making it easy to use. The interior design might be the most attractive feature of the new GLA for young people, even though it has already appeared in the A-Class and GLB, it still sparks curiosity. 2. Functions: The full LCD instrument panel measures 10.25 inches, with very fine display effects and no noticeable glare under strong light, providing a great experience. The 64-color ambient lighting is highly playful, supporting dynamic multi-color modes. Different zones of the light strips can display different colors and continuously change.

20

2

Share

What are the passing criteria for hill start and fixed-point parking?

Hill start and fixed-point parking is generally the second item in the subject two driving test. Many students are not very familiar with the requirements and key points of fixed-point parking and starting. The following are the passing criteria for hill start and fixed-point parking operations: 1. After the vehicle stops, if the front bumper is not positioned on the pole line and exceeds 1250px in front or behind - fail. 2. When starting, if the vehicle rolls back more than 750px - fail. 3. After the vehicle stops, if the starting time exceeds 30 seconds - fail. 4. After the vehicle stops, if the front bumper is not positioned on the pole line but does not exceed 1250px in front or behind - deduct 10 points. 5. When starting, if the vehicle rolls back less than 750px - deduct 10 points. 6. After stopping, if the body is more than 750px away from the road edge line - deduct 10 points.

3

Share

Why doesn't the car door light turn on?

Possible causes for the light not turning on include a burnt-out bulb or the driver manually turning off the dome light switch. After checking the status of the car's dome light switch, determine whether the bulb has malfunctioned. 1. Door classification: Based on the number of doors, car models can be categorized into two-door, three-door, four-door, and five-door vehicles. Considering the car's purpose and passenger convenience for entering and exiting, the door opening angle is typically controlled at around 70 degrees. 2. Precautions when opening car doors: After confirming safety, slowly open the door to exit the vehicle: Once safety is confirmed through the door gap, you can exit the car. When getting out, continue to observe the traffic behind you and always keep the door under control with your hand. Only open the door to an angle sufficient for exiting; do not push the door open abruptly.

12

2

Share

What Causes the Metallic Clanking Sound from the Car Chassis?

Metallic clanking sounds from the car chassis are typically caused by damage, deformation, or detachment of components in the disc brake system, such as the brake shoe support plate, vibration damping spring plate, or guide plate. These issues increase the clearance between the brake shoe iron and the brake caliper support frame, leading to mutual collisions that produce the noise. It is recommended to visit a repair station to fix deformed parts and replace detached components. Relevant information about the car chassis is as follows: 1. Introduction: The car chassis consists of four main systems: the transmission system, running gear, steering system, and braking system. The chassis serves to support and install the car engine and its various components and assemblies, forming the overall shape of the vehicle. It also receives power from the engine to enable movement and ensure normal driving. 2. Maintenance Guidelines: To maintain the chassis in winter, thorough cleaning and rust-proof treatment are essential. Start with a complete cleaning of the chassis. If there is excessive mud or dirt, use an oil-removing cleaner to wash it once, revealing the chassis's original color, before proceeding with rust-proof care.

16

2

Share

Why is the Fuxi AS125 also called the Night Runner?

Is Drilling Holes for Car Dent Repair a Concern?

What Do the 2 and L Gears Mean on an Automatic Transmission?

What are the functions of the center console buttons in the 2020 Mercedes-Benz GLA200?

What are the passing criteria for hill start and fixed-point parking?

Why doesn't the car door light turn on?

What Causes the Metallic Clanking Sound from the Car Chassis?

Is the Accord a Japanese car?

What Causes Abnormal Noises in Automatic Transmission Cars?

Why is the rear armrest box of the Mercedes-Benz E300L stuck?

Why is the Mazda3 display screen not lighting up?